urban ambiance UHP4158 Traditional Bath Light Instruction Manual

urban ambiance UHP4158 Traditional Bath Light

Product Information

Specifications

• Model: UHP4154
• Fixture Type: Ceiling Light
• Number of Lights: 1, 2, 3, 4, 6
• Hardware Contents:
  • Screw (#8-32) Qty : 2
  • Wire Nut Qty : 3
  • Round Mounting Plate Qty: 1
  • Hex Nut (#8-32) Qty : 2
  • Cylinder Nut (#8-32) Qty: 2

Product Usage Instructions

Preparation

1. Before beginning installation, ensure all parts are included as per the contents diagram.
2. If any part is missing or damaged, do not proceed with assembly.
3. Estimated assembly time: 30 minutes.
4. Tools required: Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Assembly Instructions

1. Loosely thread the screws and hex nuts onto the round mounting plate.
2. Adjust the screw length according to the fixture canopy depth.

Care and Maintenance
Shut off main power supply before cleaning or changing light bulbs. Wipe with a damp cloth for cleaning. Avoid abrasive or alcohol-based cleaners.

FAQ (Frequently Asked Questions)

1. Q: What should I do if a part is missing or damaged?
   A: Do not attempt to assemble, install or operate the product. Contact Customer Care for assistance.

2. Q: How do I adjust the screw length for the fixture canopy depth?
   A: Loosely thread the screws and hex nuts onto the round mounting plate and adjust accordingly based on the fixture’s requirements.

Installation Instructions

UHP4158

HARDWARE CONTENTS (not actual size)

Questions?
Call our Customer Care Team at 1-855-303-4229
www.urbanambiance.com

Safety Information

• Please read and understand this entire manual before attempting to assemble, operate or install the product.
• CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. °
• CAUTION: Risk of fire. Min. 90  C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
• CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

Preparation

1. Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
2. Estimated assembly time: 30 minutes.
3. Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care and Maintenance

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

1. Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC). You now need to adjust the screw length according to the fixture canopy depth.
2. Attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
   • Lift up the fixture to the mounting surface and pass the screws (AA) through the two mounting holes in the fixture canopy. While holding the fixture with one hand, thread the screws (AA) in or out of the round mounting plate (CC) until 3/16″ of threads are showing. That should be enough to mount the fixture as instructed in step 4.
   • Next, take the fixture down and go back and tighten the hex nuts (DD) up against the round mounting plate (CC). You now should have the correct length of threads for mounting the fixture.
3. Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all of the wire connections carefully into the outlet box.
4. Slide the mounting holes in the fixture (A) over the screws (AA) and using the cylinder nuts (EE), tighten the fixture against the mounting surface.
5. Attach the glass shades(B) to the fixture (A) and use the socket rings (C) to secure modestly tight.
6. Thread the lamps (not included) into the fixture sockets. Use 60-watt MAX incandescent medium base lamp, SBCFL or SBLED.

References

• Urban Light Fixtures | Luxury Light Fixtures | Urban Ambiance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>