My CrossWave® Cordless Max is Leaking | Support
- June 7, 2024
- Bissell
Table of Contents
If you are experiencing machine leaking, follow these steps to resolve:
Note: If there is too much water on floor, go over area without pressing trigger to suction up excess water
-
Where is your machine leaking from?
- Dirty Water Tank, or Foot > Go to Leaking from Dirty Water Tank or Foot
- Vents > Go to Leaking from Vents
- Clean Water Tank > Turn machine off
-
Remove clean water from back of machine
- Put Clean Water Tank back into machine
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Remove Clean Water Tank from machine
-
Check for cracks, leaks or deformation on tank
- If tank is damaged, a new tank should be ordered > Go to Parts & Supplies
-
With clean tank still removed, check for cracks/leaks on black cap and damage on rubber gasket
- If there are cracks or damage, a new cap should be ordered > Go to Parts & Supplies
-
Fill clean tank with water, securely install cap onto tank, firmly push back onto machine, leaving no gaps between tank & body of machine
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Is your machine leaking from the dirty water tank, foot, or vents?
- Yes > Go to Leaking from Dirty Water Tank or Foot > Go to Leaking from Vents
- No > Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......