Adapt™/PowerLifter®/PowerClean Ion Pet 2-in-1 Cordless Vacuum Brush/Foot Area | Support
- June 7, 2024
- Bissell
Table of Contents
Note: The Brush on/off switch needs to be turned on in order for the Brush
to rotate
If you’re experiencing issues in the Brush/Foot area follow these steps to
resolve:
-
Turn OFF > Remove the Foot Assembly
- Press the round silver button on the back of the Foot
-
Does the machine turn ON with Foot Assembly removed?
- No > Go to No Power/Light Flashing
- Yes > Remove the Brush by turning the groove on the Brush Clip (using a coin or screwdriver)
-
Lift Brush out > Remove all debris from Brush and Brush End Caps
- The Brush End Cap should spin freely
- If not, the Brush Roll should be replaced > Go to Parts & Supplies
-
Clear all debris from the Suction Channel
- You should be able to see through the opening (where the Handle attaches) into the Brush area
- If not, clear Channel of all debris
-
Inspect Brush and Brush Clip for damage
- If damaged > Replace the damaged part > Go to Parts & Supplies
-
Reinsert Brush > Rotate Brush to Align properly > Reattach & lock Brush Clip
-
Reconnect Foot to Handle & Hand Vac
-
Has this resolved the issue?
- Yes > Great! Glad we can get you back to Cleaning
- No > If the Brush continues to not rotate the Foot Assembly can be replaced > Go to Parts & Supplies
- If you continue to have difficulty > Please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>