My Carpet Cleaner is leaving dirty water spots or stains after cleaning | Support
- June 7, 2024
- Bissell
Table of Contents
All Carpet Cleaners
- Unplug machine and remove the clean and dirty water tanks from the machine
- Tilt machine backwards so it is resting on its handle or side
- Wipe all dirt, hair, and lint from the underside (including wheels for Upright Cleaners)
- Clean area in and around the brush roll (for Upright Cleaners)
- Empty dirty water tank and fill clean water tank with water only
- Go over previously cleaned areas, working in small sections
- Continue suctioning over affected area until only clean water is visible
*The use of spot & stain pre-treats may be needed Click for Spot & Stain Sprays
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>