My TurboClean/PowerForce/PowerClean PowerBrush Pet Brush is Not Turning | Support
- June 7, 2024
- Bissell
Table of Contents
If your brush is not turning it could be due to a broken Belt or a seized
Brush Roll, follow these steps to resolve:
-
Turn off and unplug machine
-
Use a Phllips-head screwdriver to remove 3 screws, 2 in the belt cover and 1 on the brush roll mount
-
Remove belt cover
-
Set screws aside
-
Pull brush roll out and remove the belt from track
-
Remove belt off motor shaft
-
Inspect belt for damage
- If damaged, order a new belt > Go to Parts & Supplies
-
Test brush roll by holding one end and spinning the other
- If brush roll does not spin freely, order a new one > Go to Parts & Supplies
-
Wrap belt around motor shaft
-
Put the belt on the brush roll track
-
Return the brush roll back to machine
-
Align the brush roll mount with the screw post
-
Replace brush roll cover
-
Reinstall all 3 screws
-
Plug machine in and turn on
-
Does this resolve your issue?
- Yes > Great! Glad we can get you back to cleaning
- No > Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>