My TurboClean/PowerForce/PowerClean PowerBrush Pet is Making a Loud Noise | Support

If your machine is making an abnormally loud noise it is likely due to the

belt slipping or the brush roll being incorrectly installed, follow these steps to resolve:

• Turn off and unplug machine

• Use a Phllips-head screwdriver to remove 3 screws, 2 in the belt cover and 1 on the brush roll mount

• Remove belt cover

• Set screws aside

• Pull brush roll out and remove the belt from track

• Remove belt off motor shaft

• Inspect belt for damage

  • If damaged, order a new belt > Go to Parts & Supplies 

• Test brush roll by holding one end and spinning the other

  • If brush roll does not spin freely, order a new one > Go to Parts & Supplies 

• Wrap belt around motor shaft

• Put the belt on the brush roll track

• Return the brush roll back to machine

• Align the brush roll mount with the screw post

• Replace brush roll cover

• Reinstall all 3 screws

• Plug machine in and turn on

• Does this resolve your issue?

  • Yes >  Great! Glad we can get you back to cleaning
  • No > Go to After Cleaning Care

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>