eufy Security Floodlight Camera T8420 User Guide
- June 7, 2024
- Eufy
Table of Contents
Quick
Start Guide
eufy Security Floodlight Camera
Model: T8420
51005001400 V02
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
What’s in the Box
Install Floodlight Camera to the junction box outdoors (you need to have a junction box and wires already installed). In order to stream video from Floodlight Camera, you need to make sure the Wi-Fi signal strength is strong at the location you want to install Floodlight Camera.
To avoid the risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you are uncomfortable working with electrical wiring.
Power On the Floodlight Camera Indoors
- Connect Floodlight Camera to a power source, and then wait 1 minute or until the LED indicator blinks red.
Get the eufy Security App and Setup the Camera
Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
Log in or sign up for a eufy Security account, then follow the onscreen instructions to complete setup.
To avoid the risk of shock, injury or death, always be cautious when working with electricity.
Make sure you can Livestream video from Floodlight Camera before mounting.
Mount Floodlight Camera Outdoors
Step 1
Unplug Floodlight Camera.
Step 2
Unscrew the power cord; wire nuts will be used later.
The power cord is not required when mounting the Floodlight Camera outdoors.
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make
sure the electricity in your house is properly shut off.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity.
Step 4
Remove the old Floodlight from the junction box and install the mounting plate
to the junction box.
The junction box and existing electrical wires are required for Floodlight
Camera installation.
The concaved side of the mounting plate must face outwards.
Step 5
1. User can hang Floodlight Camera upside down or install it vertically on
the wall. Select the installation method that best suits the position of your
junction box.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
If you plan to install the Floodlight Camera on the wall, please skip to
Step 6.
2. For upside-down installation, turn the camera down to the end when it’s
placed vertically, then turn the camera 180° in a clockwise direction.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
Step 6
1. Hang Floodlight Camera on the junction box with the hook provided.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
2. Connect both ground wires(yellow or green) from the junction box and
Floodlight Camera, join the wires by using a wire nut.
If the existing ground wire has been connected to the junction box or there’s
no ground wire, connect the ground wire of the Floodlight Camera to the
junction box or mounting plate directly.
| To avoid the risk of shock,injury or death, always be cautious
when working with electricity.
Remember, do hire a professional electrician if
you’re uncomfortable working with electrical wiring.
3. Use wire nuts to connect Floodlight Camera wires to the rest of the wires from the junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from the junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from the junction box.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
Step 7
Insert the central screw through the center of the Floodlight Camera and screw
it tightly.
Use the central screw cap to cover the central screw to prevent the central screw from rusting.
Step 8
After installation is complete, you can turn the camera knobs on Floodlight
Camera to adjust the camera to your desired angle.
Step 9
Switch on the main circuit breaker in the house.
To check whether Floodlight Camera is operating, check if the LED indicator
has turned solid white.
In case the Floodlight Camera is not powered on, switch off the circuit
breaker before checking the wiring of the Floodlight Camera.
To avoid the risk of shock, injury or death, always be cautious when working
with electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
In case the Floodlight Camera keeps blinking red, it means the floodlight is
not connected to the Internet. Please make sure the Wi-Fi signal is strong at
the desired location. You may consider moving the wireless router closer to
Floodlight Camera or using a Wi-Fi range extender.
For troubleshooting, check the Help section in the Eufy Security app.
Refer to the app page for what the LED indicator status lights mean.
Safety
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure conditions. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance
with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site
www.eufylife.com
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher. The connection to the so-called power
USB is prohibited.
The adapter shall be installed near the equipment and shall be easily
accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -20°C-50°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using an
unauthorized charger may cause danger and violate the authorization of the
project and the guaranteed article. This charger is for indoor use only
The charger output voltage/current is 5Vdc/2A. The plug is considered as a
disconnect device of the adapter. RF exposure information: The Maximum
Permissible Exposure (MPE) level has been calculated based on a distance of
d=20 cm between the device and the human body. To maintain compliance with RF
exposure requirements, use products that maintains a 20cm distance between the
device and the human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz for EU;
This product
is designed and manufactured with high-quality materials and components, which
can be recycled and reused.
This symbol means the product must not be discarded as household waste and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.”
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
FCC ID:2AOKB-T8420 IC:23451-T8420
Customer Service
-
Warranty
12-month limited warranty -
Call Us
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 -
Email Us
Customer Support: support@eufylife.com @EufyOffical
@EufyOffical
eufyoffical
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>