amazonbasics LED Rope Light User Manual

: June 7, 2024
: AmazonBasics

amazonbasics LED Rope Light User Manual

Product Description

A Female cord connector B LED lamp (non-replaceable)
C Attachment plug with fuse D Mounting clip and screw set

Installation

Determine installation location and lay the product in place before assembly.
Fix the product directly to the structural support. Use provided mounting clips (D).
Connect the plug (C) to a suitable outlet. The product lights up.

Connecting in series

To attach additional rope lights, unscrew the end cap on the female cord connector (A) and remove the end plug. Then connect the male cord connector from another set and tightly screw the end cap.

WARNING : Risk of electric shock! Do not combine more than:

4 sets for 40-foot (12 meters) version or
8 sets for 20-foot (6 meters) version.

Total length of a set should not exceed 160-foot (48 meters).

Use and Care Instructions

WARNING Risk of electric shock! To prevent electric shock, unplug before cleaning.
_ WARNING _Risk of electric shock! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

To clean, wipe with a soft, slightly moist cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
If the product is placed on a tree, the tree should be well secured and stable.
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on the product conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions

Fuse replacement

NOTICE The product requires a max. 3 Amp, 125 Volt fuse.

Grasp the plug (C) and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Slide open the fuse access cover on top of the plug (C) towards blades.
Remove the fuse carefully. Use a pointed object to push the fuse out of the socket.
Replace the fuse with a spare one located in the fuse compartment and slide close the fuse access cover on top of the plug (C).

CAUTION Risk of fire! Replace only with max. 3 Amp, 125 Volt fuse.
CAUTION Risk of fire! Do not replace the plug (C). It contains a safety device (fuse) that should not be removed. Discard product if the plug (C) is damaged.

FCC – Supplier’s Declaration of Conformity

Unique Identifier

B07TT6GYQ3 – 180 LED Candy Cane Striped Rope Light, 20-Foot
B07TV72B57 – 360 LED Candy Cane Striped Rope Light, 40-Foot
B07TT6G9NC – 210 LED Green Rope Light, 20-Foot
B07TS33SKB – 210 LED Red Rope Light, 20-Foot
B07TT6GYQJ – 210 LED Blue Rope Light, 20-Foot
B07TXD56K8 – 210 LED Yellow Rope Light, 20-Foot
B07TW9WZB5 – 210 LED Purple Rope Light, 20-Foot
B07TYHNSNS – 210 LED Orange Rope Light, 20-Foot
B07TRMB894 – 210 LED White Rope Light, 20-Foot
B07TXD56KT – 210 LED Warm White Rope Light, 20-Foot
B07TV73X9C – 420 LED Green Rope Light, 40-Foot
B07TV74YYJ – 420 LED Red Rope Light, 40-Foot
B07TW9YC73 – 420 LED Blue Rope Light, 40-Foot
B07TW9WD98 – 420 LED Yellow Rope Light, 40-Foot
B07TRM9MR7 – 420 LED Purple Rope Light, 40-Foot
B07TXF1P7Y – 420 LED Orange Rope Light, 40-Foot
B07TRM8X1B – 420 LED White Rope Light, 40-Foot
B07TRM8X1K – 420 LED Warm White Rope Light, 40-Foot

Responsible Party Amazon.com Services, Inc
U.S. Contact Information 410 Terry Ave N.
Seattle, WA
98109, United States
Telephone Number 206-266-1000

FCC Compliance Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

This Class B digital apparatus complies with Canadian CAN ICES‑3(B) / NMB‑3(B) standard.

Specifications

B07TT6G9NC, B07TV73X9C,
B07TS33SKB, B07TV74YYJ ,
B07TT6GYQJ, B07TW9YC73,
B07TXD56K8, B07TW9WD98,
B07TW9WZB5, B07TXF1P7Y,
B07TRM9MR7, B07TRM8X1B,
B07TYHNSNS, B07TRM8X1K
B07TRMB894, B07TXD56KT

Rated voltage: 120 V~, 60 Hz 120 V~, 60 Hz
Rated wattage: 16.8 W 33.6 W
Lamp type: LED (x210) (non- replaceable) LED (x420) (non-replaceable)
Fuse type: max. 3 Amp, 125 Volt max. 3 Amp, 125 Volt
Length: 20-foot (6 meters) 40-foot (12 meters)
B07TT6GYQ3 B07TV72B57
Rated voltage: 120 V~, 60 Hz 120 V~, 60 Hz
Rated wattage: 14.4 W 28.8 W
Lamp type: LED (x180) (non- replaceable) LED (x360) (non-replaceable)
Fuse type : max. 3 Amp, 125 Volt max. 3 Amp, 125 Volt
Length: 20-foot (6 meters) 40-foot (12 meters)

Feedback and Help

Love it? Hate it? Let us know with a customer review. Amazon Basics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.com/review/review‑your‑purchases#
amazon.com/gp/help/customer/contact‑us