KM-HSB001 KMOUK Soundbar User Guide
- June 7, 2024
- KMOUK
Table of Contents
KMOUK Soundbar
KM-HSB001 User Guide
Important Safety Instructions
- A strong impact may cause damage to the internal parts of the product. Use caution to avoid impact.
- The product contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- To reduce the risk of fire or electrical shock, do not expose this product to rain, liquids, or moisture.
- Do not expose this product to dripping or splashing and do not place objects filled with liquids, such as vases, on or near the product.
- Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
- Do not make unauthorized alterations to this product. Only use the mounting hardware supplied with this product.
- Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer.
- Do not place or install the bracket or product near any heat source, such as fireplaces, radiators, heat registers, or other apparatus that produce heat.
- Do not use chemicals or detergents to clean the product. Clean only with a dry cloth.
Unpacking
Carefully unpack the carton and confirm the following parts are included
Package Contents
1.KMOUK Soundbar
2. Remote Control
3. Optical Cable
4. DC Adapter
5. User Guide| 6.3.5mm Audio Cable
7. Wall Mount Screws 2
8. RCA to 3.5mm Audio Cable
9. AAA Battery (2)
10. Measuring Tape
---|---
Product Overview
Front Panel
Top Panel
Power Button
Press the power button briefly to power on. Press and hold for1.5 seconds to
power off.
The Source Button
Press once briefly to adjust the audio input.
Volume Down
Touch once and the volume decreases by one stop, and the indicator light
flashes accordingly once. At minimum volume, the indicator light flashes 3 times
in rapid succession.
Volume Up
Touch once to increase the volume by one stop, and the indicator light flashes
accordingly once. At maximum volume, the indicator light flashes 3times in
rapid succession.
Attention: Once you find out your friends or family members cannot pair
the soundbar Bluetooth, the reason is the Bluetooth pairing list stored in the
KMOUK soundbar. So, as you clear the paring list, they can go for it directly.
Press the power button and the mode button at the same time, hold for 5seconds
until the Bluetooth indicator flashes blue.
Back Panel
Bottom Panel
Attention: The film on the silicone pad must be removed at first use. Otherwise, it will affect the stability of the soundbar. Also, noise will be generated when playing music.
Remote Control
1. Power Button
2. Bluetooth Mode
3. Optical Input
4. AUX Input
5. Previous Track
6. Play / Pause
7. Next Track
8. Music Mode
9. Game Mode
10. TV/Movie Mode
11. Volume ‒
12. Volume +
12. Mute|
---|---
Remote Functions
Icon | Button | Description |
---|---|---|
Power Button | Power on | |
Bluetooth Mode | Input Audio Setting | |
Optical Input | ||
AUX Input | ||
Previous Track | Media Playback | |
Play / Pause | ||
Next Track | ||
Music Mode | Sound Mode Setting | |
Game Mode | ||
TV / Movie Mode | ||
Volume – | Volume down | |
Volume + | Volume up | |
Mute | Turn off the Music |
-
Attention:
The previous song / next song/play/pause function can only be used in the
Bluetooth connection. It cannot be used in optical and AUX input. -
Button 5, 9, and 10 adjust the sound according to the scene of use.
-
Press and hold the mute button for 3seconds to turn the LED light on and off.
Setup Soundbar
Connecting the Soundbar
Before using the product, you need to make sure that the product is properly
connected to the power supply.
-
Plug one end of the power cord into the power connector on the back of the KMOUK Soundbar.
-
Plug the other end of the power cord into the DC (mains) outlet.
Power On / Off
Inserting batteries before using the remote control (AAA batteries x 2).
Click the power button on the remote control or top panel. When you hear the
tone [Hi KMOUK], the product enters the power-on state.
When you click the power switch in the power-on state, the [Bye KMOUK] tone
will appear, indicating that the power is turned off.
Bluetooth Connection
Step1: After connecting the power, click the Bluetooth button on the
remote control. When you hear the tone [Pairing], enter Bluetooth pairing
state.
Step2: On your Bluetooth device, turn on the Bluetooth feature. The
Bluetooth feature is usually found in Settings.
Step3: Select the device with the name [KMOUK HSB001] from the device
list. When the pairing is successful, a [Connected] tone will be emitted.
Attention:
- On first use, the soundbar will automatically enter Bluetooth pairing mode after the power is connected.
- If you want to connect a new device, please disconnect the connected device first, press the Bluetooth button on the remote control for 3 seconds.
- In Bluetooth audio input mode, the soundbar will automatically connect to the most recently matched device.
Optical Connection
Step1: Remove the protective covers on both ends of the supplied optical
cable.
Step2: Connect the digital audio in the optical jack on the soundbar to
the optical out jack of the device with a digital optical cable.
Step2: Press the source button on the top panel of the soundbar or the
optical button on the remote control to select the optical input.
Attention:
when connecting with an optical cable, you need to set theTV’s audio mode to
external devices. At the same time, set the TV’s audio decoding mode to PCM
(Pulse-Code Modulation) mode. (The TV menu may differ depending on the TV
manufacturer.)
AUX Connection
Step 1: Connect AUX IN (audio) on the soundbar unit to the audio out jack
of the device using a 3.5 mm audio cable.
Step2: Press the source button on the top panel of the soundbar or the
AUX button on the remote control to select the aux input.
RCA Connection
Step1: Connect AUX IN (audio) on the soundbar unit to the audio out jack
of the device using an RCA to 3.5mm audio cable.
Step2: Insert the end of the RCA plugs into the TV.
Step3: Press the source button on the top panel of the soundbar or the
AUX button on the remote control to select the RCA input.
Sound mode settings
The KMOUK soundbar has 3 built-in equalizers. You can select your favorite
sound effects by using the function keys on the remote control.
When you switch between sound effects, you’ll hear the corresponding voice
prompts: [Movie Mode], [Gaming Mode] and [Music Mode]. The indicator on the
front panel shows the corresponding sound effects.
Others
When the soundbar is turned on or off, it will not affect the input source,
volume, or mode settings. However, when unplugged, the volume will be set to
65% of maximum volume, once the soundbar is powered on again.
Place Your Soundbar
Put it on the table
You can use the product on the desk of your TV or computer.
Wall mount the Soundbar
Use a ruler to measure the position of the hook part on the back of the
product and mark it on the wall. Screw the attachment into the wall with the
help of a drill or a screwdriver and hang it on the wall.
Troubleshooting
Q: Why is the unit not turning on?
A: Please check and make sure the power cord is correctly connected to a power
source.
Q: Why is there no sound or why is the sound is distorted?
A: Please go over the following:
- Check to make sure the audio cable is correctly connected.
- Turn up the volume slowly.
- Press the Mute button to switch on the sound.
- Press the Play / Pause button.
- Set the audio output mode on your TV (if applicable)accordingly with the mode setting on the soundbar.
- Remove the clear label from the footbed.
Q: Why do the buttons on the soundbar not work?
A: Switch off the Soundbar and unplug. Then connect it to a power supply and
switch it on again.
Q: Why does the remote control not work?
A: Please go over the following:
- Install 2 AAA 1.5A batteries into the remote.
- Replace the current batteries with new ones.
- Make sure the remote control is pointed to the soundbar during use.
- Make sure the remote control is within operating range.
- Switch off the soundbar and disconnect the power. Then reconnect and power it on, try again.
Specification
Application | 30″TV |
---|---|
Bluetooth | Support |
Aux in | Support |
RCA in | Support |
Optical Connection | Support |
Remote Control | Support |
Driver | 2 x 2.25″ + Passive Radiator |
Wall-mounting | Support |
Output Power | 12.5W x 2=25W |
Peak Power | 50W |
Dimension | W410 x D100 x H70 mm |
Compliance
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Attention: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement: To maintain compliance with FCC’s RF exposure
guidelines, The equipment should be installed and operated with a minimum
distance between 20cm of the radiator your body: Use only the supplied
antenna.
Recycling: To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe
recycling.
Customer Service
12-month warranty period
Within one year from the date of purchase, we will repair or replace the
product free of charge if it does not work properly due to the quality of the
product itself.
Contact Us
Mail: support@kmouk.com
Manufacturer
Name: Shenzhen YaFex E-Commerce Co., Ltd
Address: 102.23Baili Road, Bantian Street, Longgang District, Shenzhen, China.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>