KMOUK KM-HSB001 Bluetooth TV PC Smart Phones Compatible 2.0 Mini Soundbar User Guide

KMOUK Soundbar
KM HSB001 User guide

IMPORTANT SAFETY INSTRUCTIONS

• A strong impact may cause damage to the internal parts of the product. Use caution to avoid impact.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3. ‘This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
• Do NOT make unauthorized alterations to this product. Only use the mounting hardware supplied with this product
• Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer.
• Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus that produce heat.
• Do not use chemicals or detergents to clean the product. Clean only with a dry cloth.

Unpacking

Carefully unpack the carton and confirm that the following parts are included:

Package Contents

1. KMOUK Soundbar
2. Remote Control
3. Optical Cable
4. DC Adapter
5. User Guide
6. 3.5mm Audio Cable
7. Wall Mount Screws (2)
8. RCA to 3.5mm Audio Cable
9. AM Battery (2)
10. Measuring Tape

PRODUCT OVERVIEW

Front Panel

Indicator Lamp Sound mode Lamp

Top Panel

Power Button  M Music S

Press the power button briefly to power on. Press and hold torr 1.5 seconds to power off.
Double-tap touch to adjust the audio input.

–  Volume Down
Touch once and the volume decreases by one stop, and the indicator lamp flashes accordingly once. At minimum volume, the indicator lamp blinks 3 times in rapid succession.
+ Volume Up
Touch once to increase the volume by one stop, and the indicator lamp flashes accordingly once. At maximum volume, the indicator lamp flashes 3 times in rapid succession.
Attention : Once you find out your friends or family members cannot pair the soundbar Bluetooth, this is because of the Bluetooth pairing list stored in the KMOUK soundbar. So, as you clear the paring list, they can go for it directly. Press the power button and the Mode button at the same time, hold for 5 seconds, until the Bluetooth indicator blinks blue.

Back Panel

| Power Jack
---|---
Optical Input
AUX Input
Hanging Holes

Bottom panel

Silicone feet

Attention : The film on the silicone pad must be removed at first use. Otherwise, it will affect the stability of the soundbar. Also, the noise will be generated when playing music. Remote Control

1. Power Button
2. Bluetooth Mode
3. Optical Mode
4. AUX Input
5. Previous Track
6. Play / Pause
7. Next Track
8. Music Mode
9. Game Mode
10. TV/Movie Mode
11. Volume –
12. Volume +
13. Mute

REMOTE FUNCTIONS

Attention:

• The previous song/next song/play/pause function can only be used in the Bluetooth connection. It cannot be used in AUX/OPT mode.
• Button 5, 9, and 10 adjust the sound according to the scene of use.
• In the power-on state, if there is no operation within one minute, the indicator light will turn off automatically.

Setup Soundbar

Connecting the Soundbar
Before using the product, you need to make sure that the product is properly connected to the power supply.

1.  Plug one end of the power cord into the power connector on the back of the KMOUK Soundbar.
2. Plug the other end of the power cord into DC (mains) outlet.
   Inserting batteries before using the remote control (AM batteries x 2).

Power ON/OFF
Click the power button on the remote control ortop panel. When you hear the tone [Hi KMOUK], the product enters the power-on state.When you click the power switch in the power-off state, the [Bye KMOUK] tone will appear, indicating that the power is turned off.

Bluetooth Connection Bluetooth’

Step: After connecting the power, click the Bluetooth button on the remote control.

Step2: On your Bluetooth device, turn on the Bluetooth feature. The Bluetooth feature is usually found in Settings.
Step3: Select the device with the name [HSB001] from the device list. When the pairing is successful, a [Connected] tone will be emitted.

Attention :

• On first use, Soundbar will automatically enter Bluetooth pairing mode after the power is connected.
• If you want to connect a new device, please disconnect the connected device first, and press the Bluetooth button on the remote control for a second.
• In Bluetooth audio input mode, the Soundbar will automatically connect to the most recently matched device.

OPTICAL Connection

Step]: Remove the protective covers on both ends of the supplied optical cable.
Step2: Connect the DIGITAL AUDIO IN (OPTICAL) jack on the soundbar to the OPTICAL OUTjack of the device with a digital optical cable.
Step3: Press the (Source) button on the top panel of the Soundbar or the OPL button on the remote control to select the Optical Mode.
Patients

Attention

When connecting with an optical cable, you need to set the N’s audio mode to external devices. At the same time, set the N’s audio decoding mode to PCM (Pulse-Code Modulation) mode. (The TV menu may differ depending on the TV manufacturer.)

AUX Connection / AUX

Step]: Connect AUX IN (Audio) on the soundbar unit to the audio OUTjack of the device using a 35mm audio cable.
Step2: Press the (Source) button on the top panel of the Soundbar Bordeaux button on the remote control to select the aux Mode.
RCA Connection / RCA’

Step: ConnectAUX IN (Audio) on the soundbar unit to the audio OUT jack of the device using a 35mm audio cable.
Step2: Press the (Source) button on the top panel of the Soundbar or the AUX button on the remote control to select the AUX Mode.

Sound mode settings

The KMOUK Soundbar has 3 built-in equalizers you can select your favorite sound effects by using the function keys on the remote control. When you switch between sound effects, you’ll hear the corresponding voice prompts,[Movie Mode], [Gaming Mode] and [Music Mode]The indicator on the front panel shows the corresponding sound effects.

Others

Turning off the Soundbar will automatically reset the volume setting. When powered back on, the volume will be set to 60% of its maximum value. The equalizer and sound source input settings will remain the same as before they were turned off.

Place Your Soundbar

Put it on the table.

You can use the product on the desk of your TV or computer.

Wall mount the Soundbar

Use a ruler to measure the position of the hook part on the back of the product and mark it on the wall. Screw the attachment into the wall with the help of a drill or a screwdriver and hang it on the wall.

Troubleshooting

Q: Why is the unit not turning on?
Please check and make sure the power cord is correctly connected to a power source.
Q: Why is there no sound or why is the sound is distorted?
Please go over the following:

• Check to make sure the audio cable is correctly connected.
• Turn up the volume slowly.
• Press the Mute button to switch on the sound.
• Press the Play / Pause button.
• Set the audio output mode on your TV (if applicable)accordingly with the mode setting on the Soundbar.
• Remove the clear label from the footbed.
  Q: Why do the buttons on the Soundbar not work?
  A. Switch off the Soundbar and unplug. Then connect it to a power supply and switch it on again.
  Q: Why does the remote control not work?
  Please go over the following:
  • Install 2 AM 1.5A batteries into the remote.
  • Replace the current batteries with new ones.
  • Make sure the remote control is pointed to the Soundbar during use.
  • Make sure the remote control is within operating range.
  • Switch off the Soundbar and disconnect the power. Then reconnect and power it on, try again.

Specification

COMPLIANCE

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ATTENTION : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Recycling : To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Customer Service
12-month warranty period Within one year from the date of purchase,
we will repair or replace the product free of charge if it does not work properly due to the quality of the product itself.
Contact Us Mail:support@kmouk.com
Manufacturer Name: Shenzhen YaFex E-Commerce Co., LTD Address: 102, 23 Baili Road,
Bantian Street, Longgang District, Shenzhen, China.
Made in China

Documents / Resources

| KMOUK KM-HSB001 Bluetooth TV PC Smart Phones Compatible 2.0 Mini Soundbar [pdf] User Guide
SB2027, HBOSB2027, KM-HSB001 Bluetooth TV PC Smart Phones Compatible 2.0 Mini Soundbar, Bluetooth TV PC Smart Phones Compatible 2.0 Mini Soundbar
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>