KMOUK Sound Bars for TV KM-HSB003 Instructions
- June 6, 2024
- KMOUK
Table of Contents
KMOUK Sound Bars for TV KM-HSB003
How to connect with Bluetooth
Step1.
Soundbar need to be “BT IN” mode, you can operate the remote control or
soundbar on the “SOURCE” button to switch to BT mode.
Step2 for TV
Turn on the TV —>Setting—>Bluetooth—>Search for equipment—>Find and click on
the ”KMOUK KM-HSB003″—>Connected(Maybe the TV can not connect 2 device at the
same time via Bluetooth)
Step2 for phone
Turn on the phone Bluetooth, search for Bluetooth ”KMOUK KM-HSB003″,
connected. ( If you can not search the pairing name may be cell phone
Bluetooth timeout, you need to close the Bluetooth search again, click on the
pairing name ”KMOUK KM-HSB003″ shows a successful connection, Bluetooth
connection success.)
How to connect with HDMI
Step1.
The sound bar needs to be in “HDMI” mode, you can operate the remote control
or the “SOURCE” button on the sound bar to switch it.
Step2.
Plug one end of the cable into the sound bar, the other into the TV on the
HDMI ARC (Please make sure that the port must be HDMI ARC, which signed next
to the port. If it is not HDMI ARC port, the sound bar can not be used. )
Step3.
Turn on the TV —> Settings —> Sound Settings —> Sound output select HDMI ARC
output —> Digital output —> PCM —> Exit.
How to connect with OPT
Step1.
The sound bar needs to be in “OPT” mode, you can operate the remote control or
the “SOURCE” button on the soundbar to switch it.
Step2.
Remove the protective cover from both ends of the optical cable, plug one end
into the sound bar, and the other into the optical interface of the TV or
device.
Step3.
Turn on the TV—>Settings—>Sound settings—>Sound output select OPT
output—>Digital output —> PCM—>Exit.
How to connect with AUX
Step1.
The sound bar needs to be in “LINE IN” mode, you can operate with the KMOUK
remote control or the “SOURCE” button on the sound bar to switch.
Step2.
Plug the 3.5mm audio cable or 3.5mm to RCA cable into the soundbar 3.5mm audio
hole on the sound bar, the other end plugged into the TV audio interface.
(Please make sure that the TV interface must be the output port OUT.)
Step3.
Turn on the TV —> Settings —> Sound Settings —> Sound output select headphones
or speakers —> Exit.
The instruction will be also attached. We would be very happy to know if you connect the soundbar correctly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>