Eureka Forbes Aeroguard Auto 10X Instruction Manual

Table of Contents

EUREKA FORBES Aeroguard Auto 10X

Instruction manual

1 Safety precautions “READ AND SAVE THESE INSTRUCTIONS”

Warning: Failure to follow these instructions may result in major injury or property damage.

Do not insert fingers or foreign materials such as pins, nails, etc. into the air inlet and outlet.
Do not open the filter cover during working.
Do not open, repair, or alter the product or adaptor arbitrarily.
Do not use the product in high humid areas, and do not touch the adaptor (or power plug) with wet hands.
Do not use the product where there are combustible gas or flammable materials.
Do not spray the product with combustible materials such as pesticides.

Caution: Failure to follow these instructions may result in injury or property damage.

Use the specified adaptor(DC5V, 1 A) and do not use a damaged adaptor or a damaged plug.
Do not use a damaged or dusty power cord, or a damaged power socket.
Do not insert foreign materials such as pins, nails, etc. into the product.
If there are any odd noises, burning odor, or smoke, unplug the power cord immediately.
Do not use the adapter and product close to heat sources.
If the product is damaged or immersed, be sure to fix it before use.
Do not immerse the product in water and do not pour water on the product.
Do not bend the power cord and do not get it damaged.
Turn off the product first and then unplug the power cord.
Do not give any strong impact on the product or drop it on the floor.

Eureka Forbes Aeroguard Auto 10X -

Caution: Failure to follow these instructions may result in injury or property damage.

Make sure to be no obstacles in the area of the air inlet or outlet of the product.
Make sure to use the product with a filter.
Do not use the product to remove toxic gas.

How to operate

Press the button to operate as follows. Power ON/ OFF ( Long Press) → Speed 1 & Speed 2 ( Single Touch)

If power is restored after shutdown, it will operate in the previous operation state.

Caution: Failure to follow these instructions may result in injury or property damage.

Disconnect the power cord prior to cleaning or exchanging a filter.
Never spray water directly to clean or wipe the product with detergent containing
organic solvents( thinners, etc.), bleach, chlorine, and abrasives.
TiO2 Ceramic filter and HEPA Filter periodically.
To clean the body of the product, Wipe with a soft, dry cloth.

Turn the upper cover clockwise and pull it downward.
Pull the back cover as shown.
-Please periodically clean the dust in the pre-filter.
Remove the filter from the body.
-Replace the HEPA filter periodically. (Do not reuse)
-Refer to the next step for how to reconstruct filter
How to recycle TiO2 Ceramic Filter cleaning period / 6month
After immersing the TiO2 ceramic filter in boiling water for 20 to 30 minutes, wipe the water off and dry completely using a paper towel or dryer before using the product. Take care not to burn yourself with boiled water.
Insert the cleaned pre-filter and TiO2 ceramic filter and HEPA filter into the product and assemble in reverse order.

Purchase the HEPA filter separately and replace as described above.
Exchanging period / 6month (Depending on the environment, the replacement cycle of the HEPA filter may vary.)

If the product fails to operate due to negligence or fault of the customer, then repair or replacement may be provided for a fee. Please keep this warranty card and all related documents in a safe place,
these are your only copies and they shall not be reissued.