NITECORE Tiki UV User Manual

NITECORE Tiki UV User Manual

Features

• Utilizes a primary Luminus SST-10-UV LED (Radiant Power: 1,000mW; Wavelength: 365nm)
• Equipped with 2 x auxiliary high CRI white LEDs (CRI≥90; Color Temperature: 4500K)
• The primary UV light utilizes a TIR (Total Internal Reflection) lens for a uniform and soft beam
• Built-in rechargeable Li-ion battery
• Built-in Li-ion battery charging circuit with a micro-USB port
• Advanced Power Cut-Off (APC) technology for an ultralow standby power consumption
• One hand operable interface controls 2 outputs with a single switch
• Head constructed from aluminum alloy with a superior heat dissipation capability
• Body constructed from durable PC (V0) materials
• Waterproof and dustproof rating in accordance with IP66
• Impact resistant to 1 meter

Specifications                               Accessories

Length:               55mm (2.17″)            Key Clasp Head Diameter: 14.7mm (0.58″)
Weight:               10.5g (0.37oz)

Technical Data

| UV| AUX WHITE
---|---|---
HIGH| LOW| HIGH| LOW| WARNING FLASHING
Radiant Power / Brightness| 1,000mW| 180mW| 70 Lumens| 35 Lumens| 35 Lumens
Runtime| 1h| 2h| 30min| 1h| 11h
Beam Distance| －| －| 12m| 7m| －
Peak Beam Intensity| －| －| 36cd| 15cd| －
Impact Resistance| 1m
Rating| IP66

Note: The stated data is measured using the built-in Li-ion battery (130mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Charging Function

The TIKI UV is equipped with an intelligent charging system. Please charge the battery before the first use. Connecting to the External Power: As illustrated, use the USB cable to connect an external power supply (e.g. a USB adapter, a computer or other USB charging devices) to the USB port to begin the charging process. The charging time is approx. 1h 20min.
Charging Indicator: During the charging process, the charging indicator located beneath the switch will be steadily turned on. When the battery is fully charged, the charging indicator will be turned off.
Note: The TIKI UV should be recharged when the output appears to be dim or the light becomes
unresponsive due to low power.

Primary UV Light

On / Off

On: When the light is off, double press the Power Button to access UV LOW.
Off: When the UV light is on, long press the Power Button to turn it off.

UV Levels

When the UV light is on, short press the Power Button to switch between UV HIGH and UV LOW. Note: The TIKI UV will regulate its output to avoid overheating and prolong its lifespan when accessing UV HIGH for over 1 minute.

Momentary Access to UV HIGH

When the light is off, press and hold the Power Button to access the UV HIGH. Release to turn it off.

Auxiliary White Light

On / Off

On: When the light is off, triple press the Power Button to access AUX WHITE LOW. Off: When the auxiliary white light is on, long press the Power Button to turn it off.

Brightness Levels

When the auxiliary white light is on, short press the Power Button to cycle through “AUX WHITE LOW
– AUX WHITE HIGH – AUX WHITE WARNING FLASHING”.

Warnings

1. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your
2. Please charge the battery before the first
3. Please recharge the product every 3 months when left unused for a prolonged
4. The product contains small assembly Please keep it away from children to avoid danger of choking or suffocation.
5. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if

1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
※ All images, texts and statements specified herein this user manual are for reference purposes only.
Should any discrepancy occur between this manual and information specified on www.nitecore. com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

SYSMAX Innovations Co., Ltd.

TEL:        +86-20-83862000
FAX:        +86-20-83882723
E-mail:    info@nitecore.com Web: www.nitecore.com
Address：Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou,510623, Guangdong, China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>