NITECORE CU10 Split Type Bakpack Light User Guide

June 7, 2024
Nitecore

NITECORE logo

 Split Type Backpack Light

  • 150° Wide Range Flood Beam
  • High CRI COB Light Source
  • Advanced Power Cut-Off (APC) Technology

NITECORE CU10 Split Type Bakpack Light

Features
  • 150° wide range flood beam
  • Utilizes a high CRI COB light source (CRI90, Color Temperature: 5000-5500K) with a max output of 220 lumens
  • One button controls 2 brightness levels and BEACON Mode
  • Highly efficient constant current circuit provides a stable output
  • Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption
  • Convenient USB-A plug compatible with universal USB power sources
  • Shell constructed from durable PC materials
  • Waterproof and dustproof rating in accordance with IP67
  • Impact resistant to 1 meter
Specifications

Dimensions:    48.3mm×33.2mm×30.6mm (1.9″×1.31″×1.2″)
Weight:            71g (2.5oz) (Power Source Not Included)

Power Source Options

| Compatibility
---|---
NITECORE Power Bank| Y (Recommended)
USB Power Source (5V/1A or Above Output Available)|  Y (Compatible)

Note: Please use a USB power source made by professional manufacturers or sold by authorized dealers to avoid the risk of accidents.

Technical Data

|

HIGH

| LOW|

BEACON

---|---|---|---
Brightness|

220 Lumens

| 50 Lumens|

220 Lumens

Runtime|

14h

| 30h|

Beam Distance|

20m

| 9m|

Peak Beam Intensity|

104cd

| 22cd|

Impact Resistance|

1m

Rating|

IP67

Note: The stated data is measured using a 10,000mAh power bank under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
3. the product(s) is/are damaged due to using an unofficially recommended power source.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com

  • All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
Installation on the Backpack

NITECORE CU10 Split Type Bakpack Light A NITECORE CU10 Split Type Bakpack Light B NITECORE CU10 Split Type Bakpack Light C

(English) CU10

Operating Instructions

Installation on the Backpack
Install the CU10 on the shoulder strap of the backpack with the NITECORE logo in the proper direction as illustrated. Otherwise, the illumination performance will be affected.

Connecting a Power Source
Use the USB cable of the CU10 to connect an external USB power source.

Warnings:

1. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
2. When the product is kept in a backpack, please disconnect it from the power source to prevent accidental activation.

On / Off
On: When the light is off, long press the Power Button to turn it on and access the LOW Level.
Off: When the light is on, long press the Power Button to turn it off.

Brightness Levels
When the light is on, short press the Power Button to switch between HIGH and LOW.

BEACON Mode
When the light is off, press and hold the Power Button even after accessing the LOW Level until it accesses the BEACON Mode. When the BEACON Mode is on, long press the Power Button to turn off the light.

Changing Power Sources
The power source should be replaced or recharged when the output appears to be dim or the light becomes unresponsive due to low power.

SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road,
Tianhe District, Guangzhou,510623, Guangdong, China

Please find us on facebook : NITECORE Flashlight

Thanks for purchasing NITECORE!

Made in China
CU09071021

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals