EUROM Q-Tower 1200 User Manual

EUROM Q-Tower 1200

Thank you for choosing this EUROM device. You have purchased a quality device that you will enjoy for many years. Using this device with respect and care will reduce the risk of personal injury or material damage.

CAUTION: It is important to read and understand this instruction manual before installing and using the device.

Introduction

This manual describes the correct and safe use of this device. Keep this manual for future reference. The manual is an essential part of the device and must be given to the new owner upon resale or exchange. This manual has been compiled with the utmost care. Nevertheless, we reserve the right to improve and adjust this manual at any time. The images used may differ.
The following symbols and terms are used in this manual to alert the reader on safety issues and important information:

WARNING: Indicates a hazardous situation which, if the safety instructions are not followed, can lead to injuries to the operator or bystanders, light and/or moderate damage to the product or to the environment.
CAUTION: Indicates a hazardous situation which, if the safety instructions are not followed, can lead to light and/or moderate damage to the product or to the environment.

Warranty

EUROM offers a 24-month warranty on this device from the date of purchase. The warranty does not cover wear and tear from normal use. The warranty expires if a defect is the result of unintentional or careless use of the device. The manufacturer, importer and supplier are not liable for incorrect connections.

Identification

Specifications

Description

The Q-Tower 1200 is an easy-to-use electric heater for in- and outdoor use, see (Figure 3) and (Figure 4). The device is fitted with a tipping safeguard, which ensures it automatically shuts off if it tips over. When the device is returned to its upright position, it will resume functioning normally. Before reusing the device, switch it off, unplug it and check it for damage. Do not use the device if it is damaged or malfunctioning, but always contact your supplier.

1. Control panel
2. Heating tube
3. Safety grill
4. Base
5. Power plug
6. Power cable hook
7. Handle

Control panel

1. Control knob
2. Off
3. Low
4. High
5. Osc (Motion)

Safety

Please read and understand these safety instructions. Incorrect use can cause injury and will void EUROM’s warranty.
This device is not suitable for use by persons with a physical, sensory or mental disability, or lack of experience and knowledge (including children). Keep the device out of reach of children, unqualified persons and pets. Do not use this device in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. Never leave the device unattended while it is in operation.

General safety instructions

WARNING

• Prevent splashing water on or in the device.
• Do not immerse any part of the device in water or other liquids.
• Never insert fingers or other objects into the openings of the device.
• Do not expose the device to strong vibrations or mechanical stress.
• The device becomes extremely hot during use. Do not touch the device during use or within five minutes after use.
• Do not cover the device during usage or after use while the device is still hot.
• To reduce the risk of fire, keep textiles, curtains, tent canvasses and other flammable material at a minimum distance of 1 meter from the device.

Safety during operation

WARNING
Do not use the device:

• if any parts are dirty or wet;
• near or in a humid environment, like a bathroom or laundry room;
• near a water source, like a bath, shower or swimming pool;
• near or in a dusty and dirty environment;
• near flammable materials, liquids or fumes;
• near other heat sources and open fire;
• immediately below a socket-outlet;
• with an appliance that automatically switches the device on, such as a timer, dimmer or any other device.

If the device, the electric cable or plug shows damage or is malfunctioning, immediately take the appliance out of use and disconnect the power supply.

Transport and storage

• Clean the device before storing it.
• Store the device upright in its original packaging in a cool, dry and dust-free area.
• Transport the device upright.

Installation

The device is packed in one box. Remove all packaging material and check that the device is not damaged. Do not use the heater if it is damaged, but always contact your supplier. Keep the packaging for safe storage and transport.

WARNING
Do not use an extension cable, this can cause overheating and fire. If using an extension cable is unavoidable, make sure it is undamaged and earthed. Use an extension cable with a minimum power of 1200 Watt. Always unwind the extension cable completely to prevent overheating.

CAUTION
Make sure that the main voltage is the same as indicated on the identification label of the device. All electrical connections must stay dry under all circumstances.

1. Place the device on a level and steady surface.
2. Place the device with a minimum distance of 1 meter to any object, wall or ceiling.
3. Do not place the device immediately below a socket-outlet.
4. Make sure the control knob is in the Off position (Figure 5, pos. 1).
5. Put the power plug into an earthed wall socket that is easily accessible (Figure 6, pos. 1). Use an earthed wall socket with a minimum power of 1200 Watt.

Operation

WARNING
Before every use, make sure that:

• you operate the device with dry hands;
• the device is clean and dry;
• the device is not damaged.

CAUTION: When the device is turned on it can give off smoke and an odor. This is normal and will disappear after a few minutes.

Turn the control knob to the desired setting:

• low (Figure 7, pos. 1);
• high (Figure 7, pos. 2);
• motion (Figure 7, pos. 3).

Choosing the motion function (Figure 8, pos. 1) will trigger the device (Figure 8, pos. 2) to start rotating back and forth in an angle of 70°.

After operation

CAUTION: Do not use the power cable to unplug or carry the device. Do not wind the power cable too tightly or in sharp corners.

1. Switch off the device (Figure 5, pos. 1).
2. Disconnect the power plug from the power outlet.
3. Let the device cool down before touching it.
4. Wind the power cable on the hook (Figure 9, pos. 1).

Maintenance

WARNING
Do not perform any repairs or modifications to this device.

Maintenance and repairs must be carried out by a EUROM authorized professional. If the electric cable and/or electric plug is damaged, it should be replaced by the manufacturer or its service employee or persons with similar qualifications to prevent risks.

Cleaning

WARNING
The device becomes very hot. Make sure the device is turned off, unplugged and completely cooled down.

Do not use:

• scouring pads;
• hard brushes;
• flammable, aggressive or chemical cleaning products.
  Prevent water from entering the device. Do not immerse any part of the device in water or other liquids.

It is recommended to clean the device after each use and prior to storage.

1. Wipe the device with a damp, clean, soft, lint-free cloth or a soft brush.
2. Let the device dry completely prior to use and storage.

Disposal

At its end of life, discard the device according to the local laws and regulations, or deliver the device to your supplier.
Attachments
The CE declaration can be found at the end of this manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>