airlive Live-16GTM Live Gigabit Switch User Guide
- May 15, 2024
- airlive
Table of Contents
airlive Live-16GTM Live Gigabit Switch
Product Information
Specifications
- Model: Live-16GTM, Live-16GT, Live-24GT
- Network: Gigabit Switch 10/100/1000Mbps
- Ports: 16x or 24x 10/100/1000Mbps RJ45
- LED Definitions: Power, Link/Act
- DIP Switch Control
Product Usage Instructions
Installation Steps
- Remove the switch and accessories from the package.
- Connect power to the switch and ensure the Power LED is on.
- Check the Port LED indicator status; ports will light up when a device is connected.
- For more detailed product information, visit www.airlive.com.
DIP Switch Control
- Standard Mode: All ports can communicate with each other.
- Port Isolation/VLAN Mode: Ports 1-14 (16GT/GTM), 1-22 (24GT) cannot communicate with each other and only communicate with UP-Link ports.
- Network Clone Mode: Disables Flow control function on all ports, suitable for broadcast or multicast data transmission environments.
Power Rack Installation for Live-16GT and Live-24GT
- Fix L-shaped mounting brackets on both sides of the switch using provided screws.
- Secure mounting brackets on the guide groove with screws to ensure stable horizontal installation on the rack.
FAQ
Q: How can I reset the switch to factory settings?
A: To reset the switch, locate the Console Reset button and press it for 10 seconds until all LEDs flash simultaneously.
Q: What is the purpose of DIP Switch Control settings?
A: DIP Switch Control allows you to configure different communication modes for the switch, such as standard, port isolation/VLAN, and network clone modes.
Quick Setup Guide
Rack Installation for Live-16GT and Live-24GT
- Fix the L-shaped mounting brackets on both sides of the switch with the screws provided in the accessories.
- The mounting brackets are fixed on the guide groove with screws to ensure that the switch is stable and horizontally installed on the rack.
Installation Steps
Figure A
LED DEFINITIONS
| Power | Green ON | Power is on and normal. |
|---|---|---|
| Green OFF | The switch is not receiving power. | |
| Link/Act | Green ON | Link connected. |
| Green OFF | Link disconnect |
Installation Step:
- Remove the switch and accessories from the package.
- Connect power to the switch. Make sure that the “Power” LED is on.
- Check the Port LED indicator status. When a device is connected the port will light up.
- For more product information visit www.airlive.com. Live-16GT
DIP Switch Control
- Standard: In normal mode, all ports can communicate with each other.
- Port Isolation/VLAN: Port Isolation mode, In this mode ports 1~14 (16GT/GTM), 1~22 (24GT) cannot communicate with each other and can only communicate with the UP-Link ports 15/16 (16GT/GTM), 23/24 (24GT)
- Network Clone: The Flow control function of all ports is disabled, which is suitable for some environments that use broadcast or multicast to transmit data.
Declaration of Conformity
We, Manufacturer/Importer
AirLive Technology Corporation 4F, No.132, Lane 235, Baoqian Rd., Xindian Dist., New Taipei City 23145, Taiwan
Declare that the product SOHO Live Series Switch Live-16GT, Live-16GTM, and Live-24GT is in conformity with In accordance with 2014/30/EU and 2014/35/EU Directive
Clause
- EN 55032:2015+A11:2020
- EN 55035:2017+A11:2020
- EN 61000-3-3:2013+A2:2021+AC:2022-01
- EN IEC 61000-3-2:2019+A1:2021 (LVD)
- EN IEC 62368-1:2020/A11:2020
Conformity with
In accordance with RoHS Directive 2011/65/EU Annex II amending Annex (EU)2015/863 and amending Annex (EU)2017/2102
- CE marking
Manufacturer/Importer
- Name: A van Rossem Position/ Title: Product Manager
Place: Taiwan Date: October 2023
AirLive Technology Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of directive 2014/30/EU, 2014/35/EU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>