JBL JR460NC Kids Over-Ear Headphone User Guide
- June 7, 2024
- JBL
Table of Contents
JR 406 NC
Quick start guide
WHAT’S IN THE BOX
power on & connect
- To enter pairing mode again, power off and then hold for 5 seconds.
Multi-point connection
BUTTON COMMAND
WIRED LISTENING MODE
CHARGING
FACTORY RESET
LED BEHAVIORS
TECH SPEC
Model: JR460NC
Driver Size: 32 mm / 1.26″ Dynamic Driver
Power supply: 5.0 V 1.0 A
Weight: 200 g / 0.44 lbs
Battery type: Lithium-ion Polymer (450 mA / 3.7 V)
Charging time: <2 hrs from empty
Music play time with BT on and ANC off: up to 30 hrs
Music playtime with BT on and ANC on: up to 20 hrs
Frequency Response: 20 Hz – 20 kHz
Impedance: 32 ohm
Sensitivity: 92 dB SPL@1 kHz
Maximum SPL: 81 dB
Microphone sensitivity: -27 dBV@1 kHz / Pa
Bluetooth version: 5.0
Bluetooth profile version: HFP 1.6 AVRCP 1.5 A2DP 1.3
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: <10 dBm
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLJR460NC) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.006 W/Kg.The device was tested for
typical bodily operations where the product was kept 0 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user›s head and the back of
the headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. Use of accessories that do not
meet these requirements may not comply with IC RF exposure requirements and
should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user›s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
FCC ID: APIJBLJR460NC
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
HP_JBL_JR460NC_QSG_Global_SOP_V11