ANALOG DEVICES MAX86176 Evaluation Kit Owner’s Manual
- September 21, 2024
- Analog Devices
Table of Contents
ANALOG DEVICES MAX86176 Evaluation Kit
General Description
The MAX86176 evaluation kit (EV kit) provides a platform to evaluate the functionality and features of the MAX86176 with photo plethysmogram (PPG) and electrocardiogram (ECG) measurement capabilities. The EV kit allows for flexible hardware and software configurations to help the user quickly learn how to configure and optimize the MAX86176 for their own applications.
The MAX86176 is a complete PPG and ECG analog front-end solution that consists
of two optical readout channels and one single-lead ECG channel that can
operate simultaneously. The optical readout channels support up to 6 LEDs and
4 photodiode inputs.
The MAX86176 EV kit consists of two boards.
MAXSENSORBLE_EVKIT_B is the microcontroller (MCU) board while MAX86176_EVKIT_B
is the sensor board containing the MAX86176. To enable PPG and ECG measurement
capabilities, the sensor board also contains 3 LEDs (red, green, and IR), 3
discrete photodiodes (Vishay VEMD8080), a 3 LED, 1 photodiode module (Osram
SFH7050), and component configurations on the ECG channel. The EV kit can be
powered through USB connection to PC using a USB-C to USB-A cable or a LiPo
Battery.
The EV kit communicates with MAX86176GUI (should be installed in user’s system) using Bluetooth® built into Windows (Win BLE). The EV kit contains with the latest firmware but comes with the programming circuit board MAXDAP- TYPE-C in case a firmware change is needed.
Features
- Convenient Platform to Evaluate the MAX86176
- Many Easy-to-Reach Test Points
- Real-Time Monitoring and Plotting
- Data Logging Capabilities
- Bluetooth® LE
- Windows® 10 Compatible GUI software
- Facilitates IEC 60601-2-47 Compliance Testing
EV Kit Contents
- MAXSENSORBLE_EVKIT_B microcontroller board
- MAX86176_EVKIT_B sensor board
- 105mAh Li-Po battery LP-401230
- USB-C to USB-A cable
- MAXDAP-TYPE-C programmer board
- Micro USB-B to USB-A cable
- Three ECG cables
Ordering Information appears at end of data sheet
Photo of MAX86176 Evaluation Kit
Windows is registered trademark of Microsoft Corp Bluetooth is a trademark of Bluetooth SIG, Inc.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. All Analog Devices products contained herein are subject to release and availability.
Customer Support
One Analog Way, Wilmington, MA 01887 U.S.A.
Tel: 781.329.4700
www.analog.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>