dji Mavic 2 Zoom User Guide
- June 7, 2024
- DJi
Table of Contents
MAVIC 2 ZOOM
Quick Start Guide
V1.2
Aircraft
The DJI™ MAVIC™ ‘2 Zoom features omnidirectional Vision Systems and Infrared Sensing Systems*, and comes with a fully stabilized 3-axis gimbal camera with an equivalent 2448 mm 2x optical zoom lens capable of shooting 4K videos and 12-megapixel photos that support up to 4x FHD lossless zoom. DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like HyperLapse, ActiveTrackTM 2.0, QuickShot, Panorama, and Advanced Pilot Assistance Systems, help you capture complex shots effortlessly. The Mavic 2 Zoom boasts a maximum flight speed of 44.7 mph (72 kph) and a maximum flight time** of 31 minutes.
1. Gimbal and Camera
2. Forward Vision System
3. Downward Vision System
4. Lateral Vision System
5. Downward Infrared Sensing
System
6. Auxiliary Bottom Light
7. microSD Card Slot
8. Front LEDs
9. Motors
10. Propellers| 11. Antennas
12. Aircraft Status Indicator
13. Upward Infrared Sensing System
14. Backward Vision System
15. Intelligent Flight Battery
16. Battery Level LEDs
17. Power Button
18. Battery Buckles
19. USB-C Port
20. Link Button/Linking Status Indicator
---|---
- The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines, User Manual, and watch the tutorial videos in the DJI GO™ 4 app or on the official DJI website to learn more. http://www.dji.com/mavic-2
** Maximum flight time was tested in an environment with no wind while flying at a consistent 15.5 mph (25 kph). This value is for reference only.
Remote Controller
Built into the remote controller is the DJI’s long-range transmission
technology OCUSYNC™ 2.0, offering a maximum transmission range of 5 mi (8 km)
and displaying video from the aircraft to the DJI GO 4 app on your mobile
device at up to 1080p. An on-board LCD screen gives real-time aircraft data
information and the detachable control sticks make the remote controller
easier to store.
Maximum run time: 2 hours and 15 minutes*
| 
| 
---|---|---
1. LCD Screen
2. Flight Pause Button
3. 5D Button
4. Removable Control Sticks
5. Power Button
6. Antennas
7. RTH Button
8. Control Sticks Storage Slot
9. Reserve Video-Downlink Port (USB)| 10. Mobile Device Clamp
11. Flight Mode Switch
12. Gimbal Dial
13. Zoom Adjustment Dial
14. Record Button
15. Focus/Shutter Button
16. Video-Downlink/Power Port (micro USB)
17. C1 Button (Customizable)
18. C2 Button (Customizable)
---|---
- The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no electromagnetic Interference at an altitude of about 400 ft (120 m).
The maximum runtime is tested in a laboratory environment. This value is for reference only.
Download the DJI GO 4 App and Watching Tutorial Videos
Search “DJI GO 4” in the App Store or Google Play or scan the QR code below to download the app on your mobile device.
Watch the tutorial videos at www.dji.com/mavic-2/info#video or in DJI GO 4 by tapping the icon in the top right corner of your screen.
www.dji.com/mavic-2/info#video
DJI GO 4 is compatible with iOS 10.0.2 (or later) or Android 5.0 (or later).
Preparing the Aircraft
Remove the gimbal cover from the camera.
|
Unfold the front arms.
|
Unfold the rear arms.
---|---|---
Marked Unmarked
|
Press the propellers down firmly and rotate
in the lock direction.
|
Unfolded
Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.
Charging the Batteries
Use the provided charger to fully charge the Intelligent Flight Battery before first use
Power Outlet 100 –
240V| 
Remove the Intelligent Flight Battery
---|---
Charging Time: ~1 hour 30 minutes
|
Charging Time: ~2 hours 15 minutes
Remove the Intelligent Flight Battery
Checking the Battery Levels and Powering On/Off
Press once to check the battery level. Press, then press and hold to turn
on/off.
Press once to check the battery level on the LCD screen.
Press once, then press and hold to turn on/ off the remote controller.
Preparing the Remote Controller
Unfold the antennas and mobile device clamps, then attach the control sticks.
|
Strong
---|---
Place one end of the RC cable to the end of the slot.
|
Set the antennas parallel to each other
Attach your mobile device within the clamps.
|
Optimal Transmission Range
- Ensure the control sticks are firmly mounted.
- The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller. When using an iPad or tablet, use the USB port on the remote controller.
- Do not use the Micro USB and the USB ports simultaneously for linking video.
Preparing for Takeoff
Power on the remote controller Power on the aircraft Launch DJI GO 4
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Internet
Flight
Before taking off, make sure the Aircraft Status Bar in DJI GO 4 displays “Ready to Go”.
- Auto Takeoff / Landing
****| Auto Takeoff| | Auto Landing
---|---|---|--- - Manual Takeoff / Landing
Combination stick command to start/stop the motos
| Left stick up (slowly) to take off
---|---
| Left stick down (slowly) until you touch the ground
Hold a few seconds to stop the motors
The motors can only be stopped mid-flight when the flight controller detects a critical error.
Remote Controller Operation
The default flight control is known as Mode 2. The left stick controls the
aircraft’s altitude and heading, while the right stick controls its forward,
backward, left, and right movements. The gimbal dial controls the camera’s
tilt.
Press the Flight Pause button for emergency braking during flight.
- In DJI GO 4
- Watch the tutorials in DJI GO 4 or at the official DJI website to learn more.
- Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.
Fly Safe
Avoid flying over or near obstacles, crowds, high voltage power lines, trees,
or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and
base stations as it may affect the onboard compass.
DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog, and wind speeds exceeding 10 m/s or 22 mph.
| Stay away from the rotating propellers and
motors.
---|---
No-Fly Zone
| Learn more at: http://flysafe.dji.com/no-fly
It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.
Specifications
Aircraft
Weight| 905 g
Max Speed| 44.7 mph (72 kph) in Sport mode without wind
Max Service Ceiling Above
Sea Level| 19685 ft (6000 m)
Operating Temperature| 14° to 104° F (-10° to 40° C)
GNSS| GPS + GLONASS
Operating Frequency| 2.4-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power| 2.4 GHz
(EIRP)| FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm 5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Gimbal
Controllable Range| Pitch: -90° to +30°
Camera
Sensor| 1/2.3″ CMOS; Effective pixels: 12M
Lens| FOV: approx. 83° (24 mm), approx. 48° (48 mm) ,35 mm format equivalent:
24-48 mm
Aperture: f/2.8 (24 mm) – f/3.8 (48 mm)
Focus: 0.5 m to ∞
ISO Range| Video: 100-3200 Photo: 100-1600 (auto); 100-3200 (manual)
Electronic Shutter Speed| 8-1/8000 s
Max Image Size| 4000×3000
Still Photography Modes| Single shot
Burst shooting: 3/5/7 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias
Interval
Video Recording Modes| 4K Ultra HD: 3840×2160 24/25/30p
2.7K: 2688×1512 24/25/30/48/50/60p
FHD: 1920×1080 24/25/30/48/50/60/120p
Video Storage Bitrate| 100 Mbps
Photo| JPEG, DNG (RAW)
Video| MP4, MOV (MPEG-4 AVC/H.264, HEVC)
Supported SD Cards| microSD
Max Capacity: 128 GB (UHS-I Speed Grade 3 rating required)
Remote Controller
Operating Frequency| 2.4-2.4835 GHz; 5.725-5.850 GHz
Max Transmission Distance(unobstructed and free of interference)| FCC: 5 mi (8
km); CE/MIC: 3.1 mi (5 km); SRRC: 3.1 mi (5 km)
Operating Temperature| 32° to 104° F (0° to 40° C)
Battery| 3950mAh @ 3.83V
Transmitter Power (EIRP)| 2.4 GHz
FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm,5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Operating Voltage| 1800mA @ 3.83V (when charging the mobile device)
Supported Mobile Device Size| 1800mA @ 3.83V (when charging the mobile device)
Thickness supported: 6.5 – 8.5 mm, Max length: 160 mm
Supported USB port types: Lightning, Micro USB (Type-B)
USB-C
Charger
Voltage| 17.6±0.1 V
Rated Power| 60 W
Intelligent Flight Battery
Capacity| 3850 mAh
Voltage| 17.6 V (max) ,15.4 V (typical)
Battery Type| LiPo 4S
Energy| 59.29 Wh
Net Weight| Approx. 297 g
Charging Temperature Range| 41° to 104° F (5° to 40° C)
Max Charging Power| 80 W
For more information, read the User Manual: http://www.dji.com/mavic-2
※ This content is subject to change without prior notice.
MAVIC 2 ZOOM
For online support, please scan this code
with Facebook Messenger
Documents / Resources
| dji
Mavic 2
Zoom
[pdf] User Guide
Mavic 2 Zoom
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>