NITECORE NB10000 Ultra Lightweight Energy Brick Instruction Manual
- June 7, 2024
- Nitecore
Table of Contents
NITECORE NB10000 Ultra Lightweight Energy Brick Instruction Manual
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this product, please find your verification code on the package box, and go to http://charger.nitecore.com/validation (or scan the QR code beside the verification code to visit on your mobile phone). Type in your verification code and personal information as required, and submit the page. After verification, NITECORE will send you a warranty service email for a free warranty extension of 6 months. This email and your registration email address are essential to your possible warranty application.
SYSMAX Innovations Co., Ltd
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou,510623, Guangdong, China
Made in China
Technical Data
Cell: Li-ion
Capacity: 10,000mAh 3.85V (38.5Wh)
Rated Energy: 6,400mAh 5V (TYP 1A)
Input: USB-C: 5V⎓2.4A / 9V⎓2A
Output: USB-C: 5V⎓3A / 9V⎓2A / 12V⎓1.5A
USB-A: 5V⎓3A / 9V⎓2A / 12V⎓1.5A
Dual Ports: 5V⎓3A (MAX)
IP Rating: IPX5
Dimensions: 121.9mm×59mm×10.6mm (4.8”×2.32”×0.42”)
Weight: 150g (5.29oz)
Accessories: USB Charging Cable (USB-A to USB-C)
Operating Instructions
Power Level Display
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem covered under warranty occurs, customers can contact their dealers or distributors in regards to their warranty claims, as long as the product was purchased from an authorized dealer or distributor. NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within the 15 days of purchase. After 15 days, all defective malfunctioning NITECORE® products can be repaired free of charge for a period of 12 months (1 year) from the date of purchase. Beyond 12 months (1 year), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. For anoptional free warranty extension of 6 months, please referto the “IMPORTANT WARRANTY NOTICE” section on top to validate your product.
The warranty is nullified if the product(s) is/are:
- broken down, reconstructed and/or modified by unauthorized parties
- damaged from wrong operations
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com.
※ All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
Mode Button **
**
There are indicators beneath the Mode Button. The 3 blue indicators can display the charging status and the power level while the white indicator can indicate the access of Low Current Mode.
Power Level Display
Short press the Mode Button, and the blue indicators will be turned on to display the power level. The NB10000 needs to get recharged when the last blue indicator flashes to indicate a low power. It will automatically access the hibernation status when thereis no input or output for a while.
Get Charged
During the charging process, the blue indicators will flash to indicate the power level. All 3 blue indicators will be turned on steadily when it is fully charged.
Charge the External Device
During the discharging process, the blue indicators will be turned on to indicate the remaining power.
Low Current Mode:
This mode is suitable for charging low current devices including wireless
headphones, wearables and more. Press and hold the Mode Button to turn on the
white indicator and access Low Current Mode. Press and hold the Mode Button
again to turn off the white indicator and exit Low Current Mode.
(It is recommended to exit Low Current Mode once the low current charging
process is finished.)
Warnings
- Please read the user manual carefully before using the product and connect the applicable external devices only according to the specifications in this user manual.
- Please recharge the product every 3 months when left unused for a prolonged time.
- Ambient Temperature of Usage: -10~40℃ (14~104℉); Temperature of Storage: -20~60℃ (-4~140℉)
- DO NOT leave the product unattended when it is working. Stop using the product at any sign of malfunction.
- DO NOT use charging cables made or sold by unprofessional manufacturers or ones that are damaged.
- Store the device in ventilated areas. DO NOT expose the device in rain or moist environment. Keep it away from any combustible material.
- DO NOT store or use the product in an environment where the temperature is extremely high / low or changes rapidly, or in a confined area with a high temperature.
- Avoid any shock or impact to the device.
- DO NOT place any conductive or metal object in the device to avoid short circuiting and explosions.
- DO NOT disassemble or modify the device as this could result in battery explosion, cracking or leaking, causing personal injury, property damage and/or other unpredictable risks.
Disclaimer
This product is globally insured by Ping An Insurance (Group) Company of China, Ltd. NITECORE shall not be held responsible or liable for any loss, damage or claim of any kind incurred as a result of the failure to obey the instructions provided in this user manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>