REXING Intelligent Hardwire Kit User Manual
- June 7, 2024
- Rexing
Table of Contents
REXING Intelligent Hardwire Kit
Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
Our support team will respond you as soon as possible.
Always a surprise in Rexing.
Check us out here.
- https://www.facebook.com/rexingusa/
- https://www.instagram.com/rexingdashcam/
- https://www.rexingusa.com/support/registration/
What’s in the Box?
-
Motion Sensor
-
. Smart Hardwire Kit
-
Mini-USB to Mini-USB Cable
-
User manual
Please DO NOT enable the parking monitor function in the settings of the dash cam once connected. This intelligent hardwire kit will override the dash cam’s parking monitor feature.
Overview
Step One
Once the dash cam is attached on the windshield with the included adhesive
mount, place the motion sensor on the top of the windshield about a few inches
away from the dash cam.
Please make sure that the motion sensor is not blocked by any object, especially the rear view mirror.
Step Two
Connect the motion sensor with the included USB cable.
Step Three
Run the wiring towards the fuse box with the included smart hardwire kit.
Smart Hardwire Kit Connection
If you have different
fuse type, please visit our support page at
https://www.rexingusa.com/support/ for details.
Step One
Find the switched fuse and connect the RED cable to it. This fuse has power
only when the car is on.
Step Two
Find the hot fuse the connect the YELLOW cable to that. This fuse has power
at all time.
Step Three
Attach the black fuse cable. Make sure to attached the GROUND cable to the
bolt near the fuse box.
Step Four
Finally, connect the power cable to the dash cam. Please DO NOT enable the
parking monitor function in the settings of the dash cam. The motion sensing
will automatically on once the vehicle is powered off.
Once the blue indicator is on, which means that the sensor has detected
motions.
The intelligent hardwire kit will power up the dash cam automatically and
start recording until the motion is cleared.
Warranty & Support
Warranty
The Rexing Intelligent Hardwire Kit comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at 877-740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
References
- Rexing USA | Your Roadside Eyewitness
- Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
- Rexing Product Reg II | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>