REXING R4 Plus 4 Channel Dash Cam User Guide
- May 15, 2024
- Rexing
Table of Contents
R4 Plus
Quick Start Guide
R4 Plus 4 Channel Dash Cam
The information in this manual is subject to change without notice.
www.rexingusa.com
Activate Your 18-Month Warranty & Choose Your FREE Gift!
Activate within 30 days of purchase to claim your free gift and extend your
limited 12-month warranty to 18 months.
Scan The QR To Activate & Select Your Free Gift
https://www.rexingusa.com/productreg/
Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance,
or have any suggestions to improve it, please contact us.
care@rexingusa.com
877-740-8004
Our support team will respond to you as soon as possible.
Always a surprise with Rexing
Check us out here.
- https://www.facebook.com/rexingusa/
- https://www.instagram.com/rexingdashcam/
- https://www.rexingusa.com/support/registration/
https://www.facebook.com/rexingusa/|
https://www.instagram.com/rexingdashcam/
---|---
https://www.rexingusa.com/support/registration/|
https://www.rexingusa.com/support/
What’s in the box?
1. R4 Quick Start Guide
2. Safety Guide
3. 3M Adhesive Mount
4. Suction Cup Mount
5. Cable Management Tool
6. Rexing R4 Dash Cam
7. Car Power Conntector (12ft)| 8. R4 Rear Camera with Extension Cable
9. Electrostatic Sticker
10. CPL Filter
11. Warning Sticker
12. Smart Hardwire Kit
13. 64GB SD Card
14. GPS Logger
---|---
Camera Overview
The camera is recording when the LED is flashing red. The device is charging
or powered on when the LED is solid red.
1. 8 IR Lights
2. Power Button / Screen Toggle Button
3. Menu Button / Playback Button
4. Up Button / Mode Button
5. Down Button / Mic Button
6. OK (Confirm) Button / Video Lock
Button / Record Button / Wi-Fi Button| 7. Charger/ Type C Port
8. Micro SD Card Slot
9. Rear Camera Port
10. Mounting Area
11. LED indicator
12. GPS Port
13. Microphone
---|---
Screen Icons
-
Recording (on)
-
Recording Time (current clip)
-
Video Resolution
-
Current Date (MM/DD/YYYY)
-
Time (24h)
-
Wi-Fi (connected)
-
GPS Signal (connected)
-
Current video file locked
-
Audio Recording (on)
-
Memory Card (Inserted)
-
Battery Charging
-
Recording (off)
-
Wi-Fi (not connected)
-
GPS Signal (Searching)
-
Audio Recording (off)
Installation
Step 1: Installing the Electrostatic Stickers
1.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol. Follow this
by wiping it dry using a clean, dry cloth to ensure a spotless surface.
1.2 Position the Sticker
Next, carefully peel off the protective film from the electrostatic sticker.
Attach the sticker to the windshield, ideally behind the rear-view mirror.
This position is recommended to avoid obstructing your view while you’re on
the road.
Step 2: Install the Dash Camera
Adhesive Mount: Place the 3M tape on the mount and properly orient the mount
square to the roof and hood line of the vehicle. Secure the Mount and Camera
Now, remove the 3M tape from the mount. Once done, you can proceed to fix both
the mount and camera onto the previously positioned electrostatic stickers.
Firmly press the mount onto the windshield.
Wait at least 20 minutes before mounting the camera.
Suction Cup Mount: Remove the protective plastic from the suction cup, clean
the mounting area of the windshield with rubbing alcohol, and wipe dry with a
lint free cloth. Now, clean the back of the suction cup with rubbing alcohol
and wipe dry with a lint free cloth. Next, apply moisture to the suction cup
to create a better seal and mount the suction cup to the windshield as shown
below and wait approximately 30 minutes for it to dry.
Once dry, attach the device by fitting the tab on the top of the mount into
the slot on the top of the device. 
Step 3: Insert the memory card
The Rexing R4 accepts Class 10/UHS-3 or higher Micro SD memory cards up to
256GB. You will need to insert a memory card before begin recording.
Before inserting or removing a memory card, first ensure you’ve powered down
the device. Gently push the memory card in until you hear a click, and allow
the spring release to push the card out.
Step 4: Power on the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and
camera. Before you start using a new memory card, you MUST format the card
within the camera using the format function. Always backup important data
stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then
turn on the device by connecting to a power source. Press OK to stop
recording. Then press the MENU button twice to enter the Menu.
All date will
be deleted
OK
Cancel
Press the OK button to confirm formatting the card
Use the UP and DOWN navigation buttons and go to the Format setting.
Press the OK button to confirm the selection. You may now disconnect from
power. The camera will shut down after 3 seconds. The camera should begin
recording automatically the next time it is powered on.
Step 5: Mount the Rear Camera
Mount the rear camera as shown below. Use rear camera cable to connect the
rear camera to the R4 camera.
Step 6: Installing the Camera onto the
Windshield
Place the camera on the mount and carefully route the power cable around the
windscreen and tuck in under the trim.
Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette
lighter. Connect car charger to the camera. The camera will auto-start
recording once powered on.
Basic Operation
Device Power
The device will be automatically powered on when plugged into a 12V accessory
socket or cigarette lighter when receives a charge (i.e. the vehicle is
started).
To turn the device on manually, press and hold the Power button until the
welcome screen appears.
The camera will automatically start recording when it’s powered on.
Menu Settings
Power on the camera. If the camera is recording, press the OK button to stop
recording.
Hold the MENU button and toggle to the desired mode.
Press the MENU button once to enter the Video Settings.
Press the MENU button twice to enter the Setup Settings.
Video Recording
The camera will automatically start recording when the device receives a
charge. The LED lights and red dot will blink red device when recording. Press
the OK button to stop recording.
Video Playback
Playback of videos can be done on the device or a computer. To playback a
video on the device, hold MENU button and toggle to the Playback mode.
Use the UP and DOWN navigation buttons to toggle to the desired video.
Press the OK button to play.
During playback, use the OK (pause), UP (rewind) and
DOWN (fast forward) buttons to control the video playback.
To playback a video using an SD card adapter, remove the memory card and
insert it into an SD card adapter. Place the adapter in the computer.
Then place the adapter into the computer.On the computer, navigate to device
drive. Then select the video to playback. Wi-Fi Connect
Step 1:
With your dash cam powered on, hold the OK navigation button to enable the Wi-
Fi function. The Wi-Fi name (aka the SSID and password for the dash cam should
be displayed on-screen. Step 2:
On your mobile device, navigate to your Wi-Fi settings. Connect to your dash
cam’s Wi-Fi by tapping its name when it appears. Enter your dash cam’s Wi-Fi
password if you are prompted to do so.
Note: On same mobile devices, you may have to try to connect more than once.
To ensure you’ve successfully connected, your mobile device’s screen should
resemble the examples shown.
Step 3:
Once you’re connected to the dash cam, open the Rexing Connect app on your
mobile device.
Please select “Keep Trying Wi-Fi” if you see the notification on the right.
The Wi-Fi network “V5_WIFI_xxxxxxx” does not appear to be connected to the
Internet Do you want to temporarily use cellular data?
Use Cellular Data
Keep Trying Wi-Fi
Step 4:
In the app, hit the “Connect” button to connect to your dash cam, allowing you
to access live view and view/download your recordings.
Note:
Hold to the OK button for 2 seconds to disconnect the Wi-Fi.
Rexing Connect App
Easily download the app by scanning the QR code below or search via the App
Store or Google Play
https://apps.apple.com/us/app/rexing-connect/id1404162933|
https://play.google.com/store/apps/details?id=com.ligo.arexingcam
---|---
Wi-Fi Connect Troubleshooting
If you bring up the Rexing Connect app and cannot connect your phone to the
dash cam please go to https://www.rexingusa.com/wifi-connect/ OR scan the QR
code below.
https://www.rexingusa.com/wifi-connect/
Internal GPS
The built in GPS logger will record the speed and location of your vehicle as
you drive.
You can then access these information while playing back your recordings using
the GPS Video player. For windows and Mac, available at
https://www.rexingusa.com/support/rexing-apps/
The dash cam will automatically search for the GPS signal once it’s connected
to the power source. Press the MENU button once and go to Video Settings.
Toggle the GPS setting, and select your favorite speed unit.
After a GPS signal is found, the screen icon will turn from not connected to
active – as per the below icons.
GPS
Date-Time Troubleshooting
If your dash cam GPS date and time are incorrect please go to
https://www.rexingusa.com/gps-date-time/ OR scan the QR code below.
https://www.rexingusa.com/hwk-install/
Parking Monitor (Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle. When the engine
is off, the hardwire kit is used to provide continuous power and protect your
car battery from being discharged.
We kindly suggest taking a moment to watch our tutorial video. It’s designed
to help you have a smooth and successful installation experience. We believe
you’ll find it very helpful!
Please go to https://www.rexingusa.com/ihwkinstall or scan QR code
https://www.rexingusa.com/hwk-install/
Option 1: Vibration Detection
To enable the Parking Monitor, you’ll need to connect it with a Rexing Type-C
Smart Hardwire Kit (Included). This feature will allow the dash cam to switch
to parking mode automatically if the vehicle’s engine turns off and switch
back to the normal recording after the vehicle’s engine turns on.
Gravity Sensing Record:
The Gravity Sensing detects significant or sudden movement (such as an impact
or collision), it will trigger an event recording. We suggest setting the
“Gravity Sensing” to High sensitivity for Parking Mode Recording.
Note:
If you do not use the parking mode function, please change the Gravity Sensing
sensitivity to low. Otherwise, the video will easily be locked and the video
cannot be deleted by the loop recording function. This will cause the memory
card to be full of locked videos and cause the recorder to fail to work
normally.
Please DO NOT ENABLE the Parking Monitor function in the settings of the dash
cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing Type-C Intelligent
Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off
on your dash cam.
Make sure that the Parking Mode is turned off on your dash cam, otherwise it
may cause a malfunction.
Once the sensor has detected MOTIONS. The intelligent hardwire kit will power
up the dash cam automatically and start recording until the MOTION is cleared.
Warranty & Support
Warranty
The Rexing R4 Dash Cam comes with a full 12-month warranty. If you register
your product on our official site
(https://www.rexingusa.com/support/registration), you can extend the
warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to
contact us at care@rexingusa.com, or call us at
877-740-8004. Queries are typically
answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and
user experience. If you have any thoughts on how we can do even better, we
welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
FCCID: 2AW5W-R4
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
MADE IN CHINA
Documents / Resources
|
REXING R4 Plus 4 Channel Dash
Cam
[pdf] User Guide
R4 Plus, R4 Plus 4 Channel Dash Cam, 4 Channel Dash Cam, Dash Cam, Cam
---|---
References
- Rexing USA | Your Roadside Eyewitness
- Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
- GPS Date-time Troubleshooting | Rexing USA
- Rexing Intelligent Hardwire Support | Rexing USA
- ProductReg | Rexing USA
- Rexing Product Reg II | Rexing USA
- Rexing Apps | Rexing USA
- Wi-Fi Connect | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>