REXING 07242023 Intelligent Hardwire Kit User Manual
- May 15, 2024
- Rexing
Table of Contents
REXING 07242023 Intelligent Hardwire Kit User Manual
The information in this manual is subject to change without notice. Rexing All Rights Reserved
Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
**(877) 740-8004
**
Our support team will respond you as soon as possible. Always a surprise in Rexing.
Check us out here.
https://www.facebook.com/rexingusa/
•https://www.instagram.com/rexingdashcam/
https://www.rexingusa.com/support/registration/
Facebook
Instagram
Site
Product Support
What’s in the Box?
-
Motion Sensor
-
Smart Hardwire Kit
-
Mini-USB to Mini-USB Cable
-
User manua
Please DO NOT enable the parking monitor function in the settings of the dash cam once connected. This intelligent hardwire kit will override the dash cam’s parking monitor feature.
Overview
We kindly suggest taking a moment to watch our tutorial video. It’s designed to help you have a smooth and successful installation experience. We believe you’ll find it very helpful!
Please go to https://www.rexingusa.com/ihwkinstall or
scan QR code
Step One
Once the dash cam is attached on the windshield with the included adhesive
mount
Option 1: To detect motion inside the cabin, please position the motion
sensor box at the top of the windshield, a few inches away from the dash cam.
Please make sure that the motion sensor is not blocked by any object, especially the rear view mirror
Option 2: To detect motion in front of the car, please position the motion sensor box on the backside of the rearview mirror.
Step Two
Connect the motion sensor with the included USB cable.
Step Three
Run the wiring towards the fuse box with the included smart hardwire kit.
Smart Hardwire Kit Connection
If you have different fuse type, please visit our support page at
https://[www.rexingusa.com](http://www.rexingusa.com)/fuse for details
Step One
Find the switched fuse and connect the RED cable to it. This fuse has power only when the car is on.
Step Two
Find the hot fuse the connect the YELLOW cable to that. This fuse has power at
all time.
Step Three
Attach the black fuse cable. Make sure to attached the GROUND cable to the
bolt near the fuse box.
Step Four
Finally, connect the power cable to the dash cam.
To active this feature，please DO NOT enable the parking monitor function in the settings of the dash cam, otherwise it may cause a malfunction.
The motion sensing will automatically on once the vehicle is powered off.
Once the blue indicator is on, which means that the sensor has detected motions. The intelligent hardwire kit will power up the dash cam automatically and start recording until the motion is cleared.
Warranty & Support
Warranty
The Rexing Intelligent Hardwire Kit comes with a full 12-months warranty. If
you register your product on our official site
(https://[www.rexingusa.com](http://www.rexingusa.com)/support/registration),
you can extend the warranty to 18 months
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better. we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment
References
- Rexing USA | Your Roadside Eyewitness
- Login • Instagram
- Rexing Fuse Tap and Add-a-Circuit Adapter with LP-mini, Mini Fuse, Micro2 blade fuse adapters | Rexing USA
- Rexing Intelligent Hardwire Support | Rexing USA
- Rexing Product Reg II | Rexing USA
- Rexing Product Reg II | Rexing USA