Seeed Technology S210X Air Temperature and Humidity Sensor User Guide
- June 5, 2024
- Seeed Technology
Table of Contents
Quick Start for SenseCAP S210X Sensors Seeed Studio
Product Catalog & User Guide
Please read the product catalog and user guide carefully before using the
product. You can scan the QR Code below to read and download documents. Or
visit the link:
sensecap-docs.seeed.cc
https://sensecap-docs.seeed.cc/index.html
Download SenseCAP Mate App
SenseCAP Mate provides a simple way to experience sensors.
- Pair via Bluetooth
- Configure device parameter
- Check device status and data
- Upgrade the firmware via OTA
For iOS, please search for “SenseCAP Mate” at the App Store to download.
You can also scan the QR Codes below to download the App in the Android or iOS
version.
|
---|---
http://sensecap-app-download.seeed.cn| https://apps.apple.com/app/sensecap-
mate/id1619944834
Frequency Explained
Sensors are manufactured to support a universal frequency plan from 902MHz
~928MHz in one SKU.
The frequency plan setting is none by default and it will not transmit RF
signal until it has been set by App via Bluetooth at the first power up. And it
can be changed to another frequency plan at any time.
Replacing Battery
Note: The sensor and PCBA are connected by wire, and the abnormal contact of the sensor will be caused by strong pull.
Note: Do not invert the positive and negative batteries. Otherwise, a short circuit may occur and the device may be damaged.
Note: During the installation, ensure that the waterproof washer is properly installed and the screws are locked; otherwise, water will flow into the device.
Installation Instructions
Install the bracket
One hand holds the clasp while the other holds the device. Pull outward with opposite force.
Mount on the pole
|
---|---
Warranty Police
Warranty period for Sensors is 12 months as of the date of delivery. Please
refer to this link for detailed information:
seeedstudio.com/get_help/ReturnsRefund
Support
Contact Seeed technical support at
sensecap@seeed.cc.
Please kindly provide the following information:
- Product name, model, and EUI
- Location of the installation site
- Contact information of a technical person who can provide further information on the problem
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>