ANKER A8362 PowerExpand Direct 6-in-1 USB-C PD Media Hub User Manual

ANKER A8362 Power Expand Direct 6-in-1 USB-C PD Media Hub User Manual

resolutions up to 4K@60 Hz
3. USB-C Port| Connect to a USB-C charger to provide pass-through charging for your iPad Pro
4. USB-A Port| Connect to a USB-A device to support data transfer at speeds up to 5 Gb/s
5. SD 3.0 Card Slot| Insert an SD 3.0 card to copy files to and from your iPad Pro
6. microSD Card Slot| Insert a microSD card to copy files to and from your iPad Pro
7. Audio Jack| Connect to earphones or other devices with a 3.5 mm connector

Note: Does not support volume control with Apple earphones

8. Power Indicator| Turns white when power is connected

  Using Your Hub

To transfer data at maximum speed, your computer, peripherals, cables, and software must all support USB 3.0.

To transmit video signals via the HDMI port, use an HDMI cable (not included).

The SD card slot supports SD, SDHC, and SDXC card types up to 2TB, at speeds up to 104MB/s.

Charger not included.

Specifications

| Data Speed

|

5 Gbps

---|---|---

| Supported Systems

|

iPad OS 13 and above

| Size

| 102 × 32.5 × 9.4 mm /

4.0 × 1.3 × 0.4 in

| Weight

| 36 g / 1.3 oz

Important Safety Instructions

• Avoid dropping.
• Do not disassamble.
• Do not expose to
• Do not expose to liquids.
• For the safest and fastest charge, use original or certified cable.
• This product is suitable for moderate climates only.
• The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
• Open flame sources, such as candles, must not be placed near this product.
• Only use a dry cloth or brush to clean this product.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A8362 is in compliance with Directive 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://[www.anker.com/products ](http://www.anker.com/products)Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A8362 is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Electromagnetic Compatibility Regulations 2016 The full text of the GB declaration of conformity is available at the following internet address: https://[www.anker.com ](http://www.anker.com/)Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio / TV technician for

The following importer is the responsible party:
Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone:1-800-988-7973
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

Service Client

| 18-Month Limited Warranty*
---|---
| Lifetime Technical Support
| support@anker.com
| (US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>