ENSTO HJT33.1202C Heat Shrink Joint Addkit Instruction Manual
- June 3, 2024
- ENSTO
Table of Contents
HJT33.1202C
Revision C
Instruction Manual
HJT33.1202C Heat Shrink Joint Addkit
| Uo /U (Um) kV | mm² | mm² |
|---|---|---|
| 6/10 (12) kV | 50-70 | 50-95 |
LEGAL NOTICE
- The product must be installed only by a competent person with sufficient training in installation practices and with sufficient knowledge of good safety and installation practices in respect of electrical equipment. If local legislation contains provisions in respect of such training or sufficient knowledge in respect of installation of electrical equipment such provisions shall be fulfilled by the said person.
- Ensto accepts no liability concerning claims resulting from misuse, incorrect installation or ignored national safety regulations or other national provisions.
- WARNING: Failure to follow the installation instructions may result in damage to the product and serious or fatal injury.
| CPEEPL130-36
900 mm| 1| | PEE232.1000
1000 mm| 1
---|---|---|---|---|---
| CPEEPL105-30
900 mm| 1| | SBC1.5
5000 mm| 1
| SIST16
370 mm| 3| | PEE92.10
1000 mm| 1
| SSCJ15
330 mm| 3| | SF4| 2
| SSET12
190 mm| 3| | SSITA42.500
3 x 500 mm| 2
| STT25
350 mm| 3| | SSCTA85.10
1000 mm| 1
| SSBO10| 1| 
| SSCTA85.6
650 mm| 3
| CA95SB2| 3| | SSCTA85.1
100 mm| 13
| SLJ1.27| 1| | SSCTA85.2
200 mm| 1
| STCTA49.05
500 mm| 2| 
| PA22.500
500 mm| 2
| STCTA49.11
11000 mm| 1| 
| SSM83.3
1 x 360 mm| 4
| PEE64.1/600
600 mm| 3| | PA23| 2
| PEE64/350
350 mm| 2| | MPA21| 2
| CT149| 9| | PEM-HJT33_1202C| 1
| PEE225W| 1| | |
| 
---|---
| 
| 
| 
| 
| 
| 
| 
| 
PEM-HJT33_1202C
2021-11-09
Revision C