Avanti DWF18V0W DWF18V1B DWF18V3S DISHWASHER Instruction Manual

DISHWASHER
INSTRUCTION MANUAL

Model Number

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products LLC P.O. Box 520604 – Miami, Florida 33152
www.avantiproducts.com

HELP US HELP YOU…

Read this guide carefully.

It is intended to help you operate and maintain your new dishwasher properly.

Keep it handy to answer your questions.
If you don’t understand something or you need For more assistance, please call:

Avanti Customer Service
1-800-220-5570
Keep proof of the original purchase date (such as your sales slip) with this guide to establish the warranty period.

Write down the model and serial numbers.
You’ll find them on a plate located on the rear of the dishwasher.

Please write these numbers here:
Date of Purchase
Model Number
Serial Number

Use these numbers in any correspondence or service calls concerning your dishwasher.
If you received a damaged dishwasher, immediately contact the dealer (or builder) that sold you the dishwasher.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

IF YOU NEED SERVICE

We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further help.
FIRST, contact the people who serviced your dishwasher. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
Customer Service Avanti Products P.O. Box 520604 Miami, Florida 33152

PARTS AND FEATURES

Before Using Your Dishwasher

• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts: 2 Wash Racks (1 Upper / 1 Lower) 4 Cup Racks 1 Silverware Basket 1 Instruction Manual 1 Installation Manual
• Clean the interior surface with lukewarm water using a soft cloth.

Important Safety Instructions

WARNING| To reduce the risk of fire, electrical shock, or injury when using your dishwasher, follow these basic precautions:
---|---

• Read all instructions before using the dishwasher.
• DANGER or WARNING: Risk of child entrapment.
• Child entrapment and suffocation are not problems of the past. Junked or abandoned dishwashers are still dangerous. . . even if they will “just sit in the garage a few days.”
• Before you throw away your old appliance: Take off the doors. Leave the shelves in place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the dishwasher.
• Never clean dishwasher parts with flammable fluids.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other dishwasher.
• Plug the dishwasher into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center

-Save these instructions-

Electrical Connection

Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

• This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be  plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

• Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

• Never use an extension cord to connect power to the unit.

• Never use a two-prong grounding adapter.

• Where a two-prong wall receptacle is encountered, contact a qualified electrician to have it replaced with a 3-prong receptacle in accordance with applicable electrical codes.

• This dishwasher requires a standard 110/120 volts A.C.~/60hz electrical outlet with three-prong ground.

• The cord should be secured behind the dishwasher and not left exposed or dangling to prevent accidental injury.

• Connect to a grounded metal, permanent wiring system: or run an equipment-grounding terminal or lead of the appliance.

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
  Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

• Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

• To minimize the possibility of electric shock, disconnect this appliance form the power supply before attempting any maintenance.

Note: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

Water Heater Safety

Under certain conditions, hydrogen may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas is explosive.
If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

Use this appliance only for its intended purpose as described in this Owner’s Manual.

WARNING
READ FOR PROPER USE

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not touch the heating element during or immediately after use.
• Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
• Use only detergent and rinse additives designed for an automatic dishwasher. Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds.
• Keep children away from detergent and rinse aid, keep children away from the open door of the dishwasher, there could still be some detergent left inside.
• The door should not be left in the open position since this could present a tripping hazard.
• During installation, the power supply must not be excessively bent or flattened.
• To reduce the risk of injury, do not allow children to play in or on a dishwasher.
• Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out.
• Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.
• When loading items to be washed:

1. Locate sharp items so that they are not likely to damage the door seal;
2. Load sharp knives with the handles up to reduce the risk of cut-type injuries.

• When using your dishwasher, you should prevent plastic items from contact with heating element.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Please dispose of packing materials properly.
• Use the dishwasher only for its intended function.
• Remove the door when removing an old dishwasher from service or discarding it.
• Do not tamper with controls.
• Do not touch the heating element during or immediately after use.

Before Using Your Dishwasher

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts: 2 Wash Racks (1 Upper / 1 Lower) 4 Cup Racks 1 Silverware Basket
  1 Instruction Manual
  1 Installation Manual

• Clean the interior surface with lukewarm water using a soft cloth.

CONTROL PANEL

Once the program has been selected, the appropriate indicator light will flash/blink intermittently.
Pre-Programmed Wash Program

Program| Cycle Selection Information| Running
time
(Mins)| Option
Half
Load| OptionExtra
Dry| OptionExtra
Rinse| Option
Sanitize| Option
Hi-Temp
---|---|---|---|---|---|---|---

Regular
Standard program for daily, regular or typical use to completely wash a load of normally soiled dishes.

Using Your Appliance:

SELECTING A WASH PROGRAM:

1. Press and hold the “ON/OFF” button to turn on your machine.
2.  Refer to the Pre-Programmed Wash Cycles table on the previous page, to select a wash program suitable for your needs.
3.  Press the “PROGRAM SELECTOR” button until the number of the program you selected appears in the display.
4.  Press the “START / PAUSE” button to activate the wash program.
5.  If you must add an item during the wash cycle, press the Start/Pause button, open the door, add your item, close the door of your appliance, and press the Start/Pause button to continue the activated wash program.
6.  It is not recommended to open the door of your machine while the activated wash program is running. Even so if the door is opened and not closed within approximately 4 seconds, the unit will not continue the wash program. In this case, you must close the door and press the “START/PAUSE” button again to  continue the wash program.

CANCELLING A WASH PROGRAM:

1. Press and hold the “START/PAUSE” button for approximately 3 seconds.
2. The display will show “1” to confirm the cancellation of the wash program.

Note: If the door is opened during the canceling process, the door must be closed within 4 seconds to continue the canceling process.
If the door is not closed during the 4 seconds, close the door and simply press the “START/PAUSE” button again to continue the cancelling process of the wash program.

SELECTING AN OPTIONAL WASH OPTION:

1.  Select the desired Pre-Programmed Wash Program as directed above.
2.  Before pressing the “START/PAUSE” BUTTON, press the “OPTIONS” button.
3. Continue to press until the indicator light of the option (Half-Load or Hi-Temp) you desire is illuminated.
4.  Press the Extra button in order to choose from Sanitize / Extra Rinse / Extra Dry options.
5. Close the door of your appliance and press the “START / PAUSE” button to activate the wash program.

Wash Options:

HALF LOAD:
This option allows you to save energy and wash a smaller load. This option should be used when washing less than a full load or in the event you do not want to load the washer and run later when completely loaded.

SANITIZE:
When the Sanitize option is selected, the water temperature will be maintained at 156ºF/69ºC (maximum). The maximum temperature may not be reached if the incoming water temperature is not adequate. Residential dishwashers are not intended for licensed food establishments or Commercial applications.

HI-TEMP:
When the HI-Temp option is selected, the water temperature will be maintained at 140ºF/60ºC (maximum). The maximum temperature may not be reached if the incoming water temperature is not adequate. Residential dishwashers are not intended for licensed food establishments or Commercial applications.
EXTRA DRY:
When the EXTRA DRY option is selected, the machine changes the water temperature for each program and the extra dry is performed.

EXTRA RINSE:
When the EXTRA RINSE option is selected, washing-rinsing steps will be added into the selected program so you can ensure that your dishes will be extra clean and glossier.

DELAY:
To delay the start of a selected cycle, press the Delay Start button until the desired delay time shows in the LED display. You can delay the start time from 1 to 19  hours. To cancel the delay start option before the set delay period is over, simply press and hold the DELAY button for approximately 3 seconds.

1. Select the desired Pre-Programmed Wash Program as directed above.
2.  Before pressing the “START/PAUSE” BUTTON, press the “DELAY” button.
3.  Set the “delay” time by pressing the “DELAY” timer button. Time will increase in increments of 1 hour with each press of the button.
4.  Once the “DELAY” button is pressed the display will alternately show 1H and will also show the program the number selected within 2 seconds of the delay time.
5.  Close the door of your appliance and press the “START / PAUSE” button.

Note: If you open and close the door of the machine during the delay timer mode, or there has been a loss of electric power, the machine will continue in delay timer mode until the timer has run out and will start the wash program as selected.

CANCELLING A DELAY TIME SET:
To cancel the delay timer function once set.

1.  Press and hold the “DELAY” button for approximately 3 seconds.
2.  After 3 seconds, the display will show “0h” confirming the cancellation of the delay timer program.
3. You can now select a new wash program as previously directed above.

Note: You cannot set a delay time mode once a wash program has begun.

END OF CYCLE
At the end of the wash cycle, “0” will be shown in the display. Open the door of the machine, press and hold the “START/PAUSE” button for approximately 3 seconds to turn the unit off.

OVERFLOW PROTECTION
Our Avanti dishwasher has an overfill protection device that could automatically shut off the inlet valve and start the drain pump if the water overflows. In the event of an overflow, the system display will flash “F1” and will attempt to drain the water. If the overflow stops and the system drains the water the “F1” will disappear. If the system cannot stop the overflow condition, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed using a sponge before restarting the dishwasher.
WATER CUT OFF – WARNING
If during a wash cycle the water main is cut-off or turned off and the machine cannot take in water the display will flash “FF”. As long as the condition or lack of water remains the display will continue to flash “FF”, once the water is returned to the unit, it will return to normal working mode.
LOSS OF ELECTRIC POWER – WARNING
If during a wash cyle the electricity is lost or turned off or the door of the machine has been opened, the machine cannot operate normally, the machine will return to normal working mode after 8 seconds once the power has returned and if the internal temperature of the unit is above 113ºF.

DETERGENT DISPENSER
The dispenser must be refilled before the start of each wash cycle following the instructions provided in the “Wash Cycle Table”. Your dishwasher uses less detergent and rinses aid than conventional dishwashers. Generally, only one teaspoon of detergent is needed for a normal wash load, heavily soiled items may need more detergent. Always add the detergent just before starting the dishwasher, otherwise, it could become damp and not dissolve properly.
Amount of Detergent to Use
IF THE WATER IN YOUR AREA IS NOT TOO HARD, YOU MAY ALSO PREVENT THE FORMATION OF
DEPOSITS BY DETERGENT
The amount of detergent needed can vary due to differences in the water hardness of your area. To determine the water hardness in your area, contact your local water utility or area water softening company. The harder the water, the more detergent you may need. Remember, you should adjust the amount of detergent you use by small amounts until you find the correct amount.

Proper Use Of Detergent

Use only detergent specifically made for use in dishwasher. Keep your detergent fresh and dry. Don’t put powder detergent into the dispenser until you’re ready to wash dishes.

Rinse Aid Dispenser

• Your dishwasher is designed to use liquid rinse aids. The rinse-aid dispenser is located on the door next to the detergent dispenser. Fill the rinse-aid dispenser until the maximum level (approximately 150ml of liquid rinse aid). Be sure not to overfill the dispenser as this will cause
  over-sudsing. Wipe away any spills with a damp cloth. Keep in mind that if you have soft water, you may not need to use a rinse-aid as it may cause a white film to develop on your dishes.

• To open the dispenser, lift up the Rinse Aid reservoir cover as shown below.

• Pour the rinse-aid into the dispenser, being careful not to overfill.

•  Replace the cover after filling.

• The rinse-aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing the water to “sheet” off the dishes.

Adjusting Rinse Aid Dispenser
A measured amount of rinse aid is released during the final rinse. As with detergent, the amount of rinse aid needed for your dishes depends n on the hardness of the water in your area. Too much rinse aid can result in lather foaming and cause cloudiness or streaks on your dishes. If the water in your area is very soft, you may not need rinse aid. If you do, you can dilute the rinse aid with an equal amount of water.

When To Refill The Rinse Aid Dispenser
Refill the Rinse Aid reservoir when the Rinse Aid indicator light on the control panel is illuminated.

How to load your dishwasher

For best results, follow these loading guidelines.

Recommendations : Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with a full load.

Do not overload the drawers or place dishes in the wrong basket.
WARNING: Always place sharp utensils with the sharp point down and open utensils with their openings down.

How to Use the Upper Rack

The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and teacups, and saucers, as well as plates, small bowls, and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water.
The upper rack can be adjusted for height by putting wheels at different heights into the rails.
Caution: Make sure that the rack is empty. Changing the height setting while the rack contains tableware could cause the contents to dislodge, causing personal injury or damage to the tableware.

1. Release the latches on both the right and left tracks of the upper rack by turning them toward the outside (illustration A).
2.  Pull out the rack completely. (illustration B).
3.  Place the rack into the track again at the desired height (illustration C).
4. Push the latches back into the correct position.

How To Use The Lower Rack
We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids, serving dishes, and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm.
Pots, serving bowls, etc, must always be placed top down. Deep pots should be slanted to allow water to flow out.
The bottom rack features fold-down tine rows so that larger or more pots and pans can be loaded.
Silverware Basket
Silverware should be placed in the silverware basket with handles at the bottom: if the rack has side baskets, the spoon should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper rack.

Caring And Maintenance

To clean the control panel use a lightly dampened cloth then dry thoroughly. To clean the exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect against freezing
If your dishwasher is to be left in an unheated place during the winter, ask a service technician to:

1.  Cut off electrical power to the dishwasher. Remove fuses or tip circuit breaker.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain water from the inlet pipe and water valve. (Use a pan to catch the water.)
4. Reconnect the water inlet pipe to the water valve.
5.  Remove the plastic sump cover in the tub at the bottom and use a sponge to soak up water in the rubber boot.

Cleaning The Spray Arms

It is necessary to clean the spray arms regularly or hard water chemicals will clog the spray arm jets and bearings. To remove the spray arm, pull the nut out by hand in an upward direction. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.

Filtering System
For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub. There are three components of the filtering system: the coarse filter, the fine filter, and the main filter.
1. Coarse Filter
Larger items, such as pieces of bone or glass, that could clog the drain are trapped in the coarse filter. To remove an item caught in this filter, gently turn the top of the Coarse filter in a counter-clockwise direction and lift it out.
2. Fine Filter
This filter holds soil and food residue in the sump area and prevents it from being re-deposited on the dishes during a cycle.
3. Main Filter
Food and soil particles trapped by this filter are pulverized by a special jet on the lower spray arm and washed down the drain.

Cleaning The Filter assembly

Turn the Coarse filter in a counter-clockwise direction.

1.  Lift the Coarse filter (b) together with the Fine Filter(a)
2.  Separate the Fine filter by lifting it out from the Course Filter (b).
3. Lift out the Main filter (c).

To replace the filter assembly follow the same steps in reverse. For best performance and results, the filter assembly must be cleaned. The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the performance level of the appliance and damaged dishes and utensils.
WARNING – Never run the dishwasher without the filters in place.

Cleaning The Door

To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the finish. Some paper towels can also scratch or leave marks on the surface.

WARNING – Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface.
How To Keep You Dishwasher In Shape

After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

No solvents or abrasive cleaning products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwashers.

When you go on Holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the AC socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.
PROBLEMS WITH YOUR DISHWASHER?
You can solve many common dishwasher problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

The power supply is not turned on.
Water pressure Is low.| Replace fuse or reset circuit breaker. Remove any other appliances sharing the same cult with the dishwasher Make sure the dishwasher is turned on and the door is dosed securely.
Make sure the power cord is properly connected. Check that the water supply is connected properly and the water is turned on.
Drain pump doesnl step| Overflow| The system is designed to detect an overflow. When it doesn’t it shuts off the circulation pump and turns on the drain pump. See Over Flaw
Noise| Some audible sounds are normal.
Utensils are not secured in the baskets or something small has dropped into the basket Motor hums.| Sound from soft food shredding action and detergent cup opening.
Ensure everything is secured Si the dishwasher.
The dishwasher has not been used regularly. If you do not use It often, remember to set it to fa and pump it out every week, which wit he keep the seal moist.
Suds in the tub| Improper detergent.
Spilled rinse agent.| Use only the special dishwasher detergent to avoid suds. If this occurs, open the dishwasher and let the suds evaporate. Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then drain out the water by slowly turning the dial trail a drain period is reached. Repeat if necessary. Always wipe up rinse agent spills immediately.
Stained tub interior| Detergent with odorant was Used.| Make sure that the detergent is the cue without colorant.
Dishes are not dried| The rinse agent dispenser is empty.| Make sure the rinse agent dispenser is fled.
Dishes and flatware, not the dean.| Improper program. Improper radcloadng.| Select a stronger program.
Make sure that the action for the detergent dispenser and spray arms are not bbciced by large dishware.
Cloudiness on glassware.| Combination of soft water and too much detergent.| Use less detergent if you have soft water and select a
shorter cycle to wash lie glassware b get them clean.
Yellow or brown gm on inside surfaces.| Tea or Coffee stains.
Iron deposits in water can cause an overall film.| Using a solution of 14 cups bleach and 3 cups warm water to remove the stains by hand.
Warning
You have to wait for 20 minutes after a cycle to let the heating elements cool down before cleaning the interior otherwise, burns will happen. You have to cal a water softener company for a special liter.
White film on the inside surface.| Hard water minerals| To clean the interior, use a damp sponge with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds.
---|---|---
Detergent left in dispenser cups.| Dishes block detergent cups.| Re-load the dishes properly.
Steam| Normal phenomenon| There is some steam coming through the vent by the door latch during drying and water draining.
Black or gray marks on dishes.| Aluminum utensils have rubbed against dishes.| Use a mild abrasive cleaner to eliminate those marks.
Water standing in the bottom of the tub.| This is normal.| A small amount of clean water around the outlet on the tub bottom at the back of the tub keeps the water seal lubricated.
Water doesn’t pump out of the tub.| The drain is clogged.| Make sure the kitchen sink is draining well. If the dishwasher drains into a disposer, run it clear.
Dishwasher leaks.| Overfill dispenser or rinse aid spills.
The dishwasher isn’t level.| Be careful not to overfill the rinse aid dispenser. Spilled rinse aid could cause oversudsing and lead to overflowing. Wipe away any spills with a damp cloth. Make sure the dishwasher is level.
ERROR CODE WARNINGS – DESCRIPTIONS

ERROR
CODE| CONDITION| WHAT TO DO
FF| Water Inlet System Failure| Make sure the water inlet tap is open and water is flowing Separate the inlet hose from the tap and clean the filter of the hose. Contact serviced the error continues.
F5| Pressure System Failure| Contact customer service.
F3| Continuous Water Input| Close the tap and contact customer service.
F2| Inability to Discharge Water| The water discharge hose and filters may be clogged. Cancel the program. if the error continues contact the service.
F8| Heater Error| Contact customer service
Fl| Overflow| Unplug the machine and close the tap. contact customer service.
FE| Faulty Electronic Card| Contact customer service
FT| Overheating| Contact customer service
F9| Diverter Position Error| Contact customer service
F8| Faulty Heater Sensor| Contact customer service
HI| High Voltage Failure| Contact customer service

**SERVICE FOR YOUR DISHWASHER

**

We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti dishwashers. With the purchase of your Avanti dishwasher, you can have the confidence that if you ever need additional information or assistance, the Avanti Products
The customer service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES

Product Information
800-323-5029| Whatever your questions are about our products, help is available.
---|---
Part Orders
800-220-5570| You may order parts and accessories that will be delivered directly to your home, by personal check, money order, Master Card, or Visa.
In-Home Repair Service
800-220-5570| An Avanti Products authorized service center will provide expert repair service, scheduled at a time that is convenient for you. Our trained servicers know your dishwasher inside and out.

YOUR AVANT] PRODUCTS WARRANTY

| Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty.
---|---
WHAT IS COVERED — LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti products will, at its option, repair or replace any part of the product which proves to be defective in material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the product has been installed and operated in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service center for repair.
THIS SECTION APPI IFS Tfl CI this WASHFRS ONI Y
LIMITED FIVE YEAR WARRANTY ON PLASTIC TUB
After one year and until five years from the date of purchase, Avanti Products will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.

LIMITED SEVEN-YEAR WARRANTY ON STAINLESS STEEL TUB

After one year and until seven years from the date of purchase, Avanti Products will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti Products, including without limitation, one or more of the following:
A failure to comply with any applicable state, local, city, or county electrical, plumbing, and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.

Any external, elemental, and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mudslides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.

Incidental or consequential damages

Parts and labor costs for the following will not be considered as warranty:

Door springs, and/or frames.

Inner door panels, door shelves, door rails, and/or door supports.

| Shipping and handling costs associated with the replacement of the unit. Repairs performed by unauthorized servicers. Service calls are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or any other acts of God. Failure of the product if it is used for anything other than it intended purpose. The warranty does not apply outside the Continental USA.

Surcharges including but are not limited to, any after-hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expenses for service calls to remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts; Products on which the serial numbers have been altered, defaced, or removed; service visits for customer

education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely responsible for any structure and setting for the product, including all electrical, plumbing, and/or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving, etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT|
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs,pro-rates, or Product replacement, once this warranty has expired.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following address within 100 days from the date of purchase and receive these important benefits: Avanti Products LLC
P.O.Box 520604 – Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.

————————–(detach here)——————————-
Avanti Registration Card

Name—————–Address————–City————-State——————-Zip———–Model ———–Serial ———
Date Purchased———-Store / Dealer Name————-E-mail Address———–Occupation ———————-
Area Code Phone Number—————–
Did You Purchase An Additional Warranty
Extended—————-None—————-

References

• Avanti is big in compact appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>