CHAUVET Professional Maverick Silens 2 Profile User Guide

: June 7, 2024
: Chauvet Professional

CHAUVET Professional Maverick Silens 2 Profile

About This Guide

The Maverick Silens 2 Profile Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

Do not supply power to fixture until you have removed internal packing foam. Remove head cover, carefully remove internal packing foam and replace cover.
DO NOT open this product. It contains no user-serviceable parts.
DO NOT look at the light source when the product is on.
CAUTION: Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
CAUTION: This product’s housing may be hot when lights are operating.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
USE a safety cable when mounting this product overhead.
DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it. (IP20)
DO NOT operate this product if the housing, lenses, or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
ONLY use the hanging/mounting bracket or the handles to carry this product.
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 3.5 m is not expected.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The luminaire is intended for professional use only.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
In the event of a serious operating problem, stop using immediately.

What is Included

Maverick Silens 2 Profile
Seetronic Powerkon IP65 power cord
Gel frame holder and gel frame
2 spare gobo holders
2 Omega brackets with mounting hardware
Quick Reference Guide

CAUTION: Do not supply power to fixture until you have removed internal packing foam. Remove head cover, carefully remove internal packing foam and replace cover.

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power linking
It is possible to link up to 2 Maverick Silens 2 Profile products at 100/120 V, 4 products at 208 V, or 4 products at 230/240 V. Never exceed this number. Power-linking cords can be purchased separately from Chauvet.

AC plug

Connection

| Wire (U.S.)| Wire (Europe)| Screw Color
---|---|---|---
AC Live| Black| Brown|

Yellow/Brass

AC Neutral

Green

****To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Replacing the fuse

Disconnect the product from power.
Using a flathead screwdriver, unscrew the fuse holder cap from the housing.
Remove blown fuse and replace with a good fuse of the same type and rating.
Screw the fuse holder cap back in place and reconnect power.

DMX Linking
The Maverick Silens 2 Profile will work with a DMX controller using a 3- or 5 pin DMX serial connection. A DMX Primer is available from www.chauvetprofessional.com.

DMX connection
The Maverick Silens 2 Profile uses a 3- or 5-pin DMX data connection for its DMX personalities: 32Ch and 41Ch. See the User Manual for information about connecting and configuring the product for DMX operation.

RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer, as not all DMX controllers have this capability. The Maverick Silens 2 Profile supports RDM protocol that allows feedback to make changes to menu map options. Download the User Manual from www.chauvetprofessional.com for more details.

Signal Connection
The Maverick Silens 2 Profile can link to controller software using an Ethernet connection. If using other Art-Net™ or sACN -compatible products with the Maverick Silens 2 Profile, you can control each individually on a single network. See the User Manual for information about how to connect and configure the product for these signals.

Art-Net™ connection
Art-Net™ is an Ethernet protocol that uses TCP/IP, which transfers a large amount of DMX512 data using a Neutrik® etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from www.chauvetprofessional.com. Chauvet Professional recommends using unicast Art-Net™ for best results.
Art-Net™ designed by and copyright Artistic License Holdings Ltd.

sACN connection
Streaming-ACN, also known as ANSI E1.31, is an Ethernet protocol that uses the layering and formatting of Architecture for Control Networks to transport DMX512 data over IP or any other ACN compatible network.

Wireless Operation
In optimal conditions, the Maverick Silens 2 Profile can operate up to 300 m (900 ft) away from the CRMX transmitter.
The CRMX receiver in the Maverick Silens 2 Profile must be paired with the CRMX transmitter for wireless operation. Download the User Manual from www.chauvetprofessional.com for more details.

USB Software Update

The Maverick Silens 2 Profile allows for software update through USB using the built-in USB port. To update the software using USB flash drive, do the following:

Power on the fixture and plug the flash drive into the USB port.
Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press ENTER. If a different message appears on the display, search for the updated software in the Menu (Updated Firmware). A list of the updated software files will be displayed.
Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press ENTER.
If the selected file is correct, the upgrade will be completed. Restart the fixture. If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat steps 1-3 using the correct file.

The .chl format file needs to be placed in the MAVERICK folder in the USB flash drive.

Mounting

Before mounting this product, read the Safety Notes. Use at least two mounting points per product. Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.

Mounting diagram

Battery-powered Display

Press and hold until menu screen appears (approximately 15 seconds). Pressing the left center button also activates the battery backup display.

Followspot Mode

The followspot mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable the followspot mode of the Maverick Silens 2 Profile, hold < UP> and < LEFT> while the product is powering on. When the product is turned off and back on, the pan and tilt will return to normal function.

Control Panel Description

Button	Name	Function
****	< UP>	Navigates upwards through the menu list or increases the

Refer to the Maverick Silens 2 Profile product page on www.chauvetprofessional.com for the latest menu map.

Main Level	Programming Levels	Description
Address	001–512	Sets the starting address

Network Setup

|

IP Mode

001–256 (sACN)

Steady

Screen Reverse

| No| Normal display
Yes| Inverted display
Auto| Automatic display orientation

Pan Angle

Tilt Angle

Preset Select

| Preset A|

Recorded preset menu options

Preset B
Preset C
Preset Sync| No| Allows recorded preset menu options to be transferred to other Maverick Silens 2 Profile fixtures in the DMX daisy chain
Yes
Reset| Pan/Tilt| Yes/No| Reset individual functions or all functions from start-up
Iris/Prism
Color/CMY
Shutters
Gobo/Gobo Rotate
Frost
Animation
Zoom
Entire Fixture
Factory Reset| No| Reset to factory default settings
Upgrade Firmware| No such file!| USB software upgrade
xxx.EKL
…
Test| Auto Test| No| Auto test all functions
Yes
Manual Test| Pan| 000–255| Manually control and test all settings through the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter/Strobe
Virtual Strobe
Cyan
Magenta
Yellow
CTO
Color
Hue Adjustment
Red Shift
RGobo Wheel
Gobo Rotation
RGobo Wheel Index Fine
Static Gobo Wheel
Animation Wheel
Shutter Rotate
Shutter 1
Shutter 1-1
Shutter 2
Shutter 2-1
Shutter 3
Shutter 3-1
Shutter 4
Shutter 4-1
Focus
Focus Fine
Auto Focus
Zoom
Zoom Fine
Prism
Prism Rotation
Iris
Frost
Frost Fine
Information| Fixture Information| Ver| V_| Shows firmware version
DMX Address| _| Shows current starting address
Personality| _| Shows current personality
Temperature| °C/ °F| Shows current product temperature in °C and °F
Fixture Hours| _| Shows number of hours product has been powered on
IP Address| | Shows current IP address
Subnet Mask| | Shows current Subnet Mask
MAC| | Shows current MAC address
Error Information| No Error!| Shows any errors, or No Error!
DMX Values| Pan| 000–255| Shows current DMX value of each setting
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter/Strobe
Cyan
Magenta
Yellow
CTO
Color
Hue Adjustment
Red Shift
Gobo 1
Gobo1 Rotation
Gobo1 Rotation Fine
DMX Values (continuation)| Static Gobo Wheel| 000–255| Shows current DMX value of each setting

DMX Values

41CH

Channel	Function	Value	Percent/Setting
1	Pan	000 ⇔ 255	0–100%
2	Pan fine	000 ⇔ 255	Fine control (16-bit)
3	Tilt	000 ⇔ 255	0–100%
4	Tilt fine	000 ⇔ 255	Fine control (16-bit)
5	Pan/tilt speed	000 ⇔ 255	Fast to slow
6	Dimmer	000 ⇔ 255	0–100%
7	Dimmer fine	000 ⇔ 255	Fine control (16-bit)
8	Shutter/Strobe	000 ⇔ 010

011 ⇔ 082
083 ⇔ 093
094 ⇔ 163
164 ⇔ 174
175 ⇔ 223
224 ⇔ 255| No function (shutter open)
Shutter effect, slow to fast No function (shutter open) Pulse effect in sequences No function (shutter open) Random effect, slow to fast No function (shutter open)
9| Virtual strobe| 000 ⇔ 004
005 ⇔ 010
011 ⇔ 015
016 ⇔ 020
021 ⇔ 025
026 ⇔ 030
031 ⇔ 070
071 ⇔ 075
076 ⇔ 116
117 ⇔ 121
122 ⇔ 162
163 ⇔ 167
168 ⇔ 208
209 ⇔ 255| No function
Section 1 on
Section 2 on
Section 3 on
Section 4 on
Section 5 on
Stop between sections 1–5 clockwise, fast to slow Stop
Stop between sections 1–5 counterclockwise, slow to fast Stop
Fade between sections 1–5 clockwise, fast to slow Stop
Fade between sections 1–5 counterclockwise, slow to fast No function
10| Cyan| 000 ⇔ 255| 0–100%
11| Magenta| 000 ⇔ 255| 0–100%
12| Yellow| 000 ⇔ 255| 0–100%
13| CTO| 000 ⇔ 255| 0–100%
14| Color wheel| 000 ⇔ 004
005 ⇔ 009
010 ⇔ 013
014 ⇔ 018
019 ⇔ 022
023 ⇔ 027
028 ⇔ 031
032 ⇔ 187
188 ⇔ 219
220 ⇔ 223
224 ⇔ 255| Open
Red Orange Dark green Cyan Congo blue UV
Split color
Color scroll, fast to slow Stop
Reverse color scroll, slow to fast
15| Hue adjustment| 000 ⇔ 127
128 ⇔ 255| -25 to 0 green
0 to +25 green
16| Red shift| 000 ⇔ 010
011 ⇔ 127
128⇔ 255| No function
Red shift off Red shift on
17| Rotating gobo wheel| 000 ⇔ 005
006 ⇔ 010
011 ⇔ 015
016 ⇔ 020
021 ⇔ 025
026 ⇔ 030
031 ⇔ 035
036 ⇔ 040
041 ⇔ 055
056 ⇔ 070
071 ⇔ 085
086 ⇔ 100
101 ⇔ 115
116 ⇔ 130
131 ⇔ 145
146 ⇔ 200
201 ⇔ 255| Open
Gobo 1 (Barking up a flaming river) Gobo 2 (Floyd)
Gobo 3 (Sparse branches) Gobo 4 (Something linear) Gobo 5 (Super max)
Gobo 6 (Windowpane) Gobo 7 (Shower glass) Gobo 1 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 7 shaking, slow to fast Gobo scroll, static to fast
Reverse gobo scroll, static to fast

18

| ****

Gobo 1 rotation

| 000 ⇔ 191
192 ⇔ 221
222 ⇔ 225
226 ⇔ 255| Indexing
Gobo rotation, fast to slow Stop
Reverse gobo rotation, slow to fast
19| Gobo wheel 1
indexing fine| 000 ⇔ 255| Fine control (16-bit)
20| Static gobo wheel| 000 ⇔ 005
006 ⇔ 010
011 ⇔ 015
016 ⇔ 020
021 ⇔ 025
026 ⇔ 030
031 ⇔ 035
036 ⇔ 040
041 ⇔ 045
046 ⇔ 060
061 ⇔ 075
076 ⇔ 090
091 ⇔ 105
106 ⇔ 120
121 ⇔ 135
136 ⇔ 150
151 ⇔ 165
166 ⇔ 210
211 ⇔ 255| Open
Gobo 1 (Dotty)
Gobo 2 (Stones)Gobo 3 (Leafiness) Gobo 4 (Busted burlap) Gobo 5 (EVH)
Gobo 6 (Basketcase)
Gobo 7 (CaChow) Gobo 8 (Grass vignette)
Gobo 1 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 7 shaking, slow to fast Gobo 8 shaking, slow to fast Gobo scroll, static to fast Reverse gobo scroll, static to fast
21| Animation wheel| 000 ⇔ 003
004 ⇔ 127
128 ⇔ 131
132 ⇔ 255| Open / No function
Clockwise rotation, fast to slow Stop
Counterclockwise rotation, slow to fast
22| Framing shutter rotation| 000 ⇔ 127
128
129 ⇔ 255| Rotation, left to center
Stop
Rotation, center to right
23| Framing shutter 1 movement| 000 ⇔ 255| Movement, outward to inward
24| Framing shutter 1 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
25| Framing shutter 2 movement| 000 ⇔ 255| Movement, outward to inward
26| Framing shutter 2 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
27| Framing shutter 3 movement| 000 ⇔ 255| Movement, outward to inward
28| Framing shutter 3 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
29| Framing shutter 4 movement| 000 ⇔ 255| Movement, outward to inward
30| Framing shutter 4 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
31| Focus| 000 ⇔ 255| 0–100%
32| Focus fine| 000 ⇔ 255| Fine control (16-bit)
33| Auto focus| 000

001 ⇔ 007
008 ⇔ 015
016 ⇔ 023
024 ⇔ 031
032 ⇔ 039
040 ⇔ 047
048 ⇔ 055
056 ⇔ 063
064 ⇔ 071
072 ⇔ 079
080 ⇔ 087
088 ⇔ 095
096 ⇔ 103
104 ⇔ 111
112 ⇔ 119
120 ⇔ 127

| Auto focus off
4 m
6 m
8 m
10 m
12 m
14 m
16 m
18 m
4 m
6 m
8 m
10 m
12 m
14 m
16 m
18 m
Reserved
34| Zoom| 000 ⇔ 255| 0–100%
35| Zoom fine| 000 ⇔ 255| Fine control (16-bit)
36| Prism| 000 ⇔ 127
128 ⇔ 255| No function
Prism effect
37| Prism rotation| 000  127
128  189
190  193
194  255| Prism indexing
Clockwise rotation, fast to slow Stop
Counterclockwise rotation, slow to fast
38| Iris| 000 ⇔ 192
193 ⇔ 213
214 ⇔ 234
235 ⇔ 255| Large to small
Auto change, slow to fast Open, slow to fast
Close, slow to fast
39| Frost| 000 ⇔ 255| 0–100%
40| Frost fine| 000 ⇔ 255| Fine control (16-bit)
41| Control (hold for 3 seconds)| 000 ⇔ 007
008 ⇔ 015
016 ⇔ 023
024 ⇔ 031
032 ⇔ 039
040 ⇔ 047
048 ⇔ 055
056 ⇔ 063
064 ⇔ 071
072 ⇔ 079
080 ⇔ 087
088 ⇔ 095
096 ⇔ 103
104 ⇔ 111
112 ⇔ 119
120 ⇔ 127
128 ⇔ 135
136 ⇔ 143
144 ⇔ 151
152 ⇔ 255| No function
Reset all
Pan & tilt reset
Effects reset (prism, iris, frost)
Gobo reset
Shutter module reset
Other reset (zoom, focus reset)
Color reset (CMY + CTO + color)
Absolute silence off
Absolute silence on
Steady off
Steady mode 1 (environment temperature 26 °C)
Steady mode 2 (environment temperature 35 °C)
Linear dimmer
Square dimmer curve
Inverse square dimmer curve
S-curve dimmer
Fast dimmer mode
Smooth dimmer mode
No function

32CH

Channel	Function	Value	Percent/Setting
1	Pan	000 ⇔ 255	0–100%
2	Pan fine	000 ⇔ 255	Fine control (16-bit)
3	Tilt	000 ⇔ 255	0–100%
4	Tilt fine	000 ⇔ 255	Fine control (16-bit)
5	Dimmer	000 ⇔ 255	0–100%
6	Shutter/Strobe	000 ⇔ 010

011 ⇔ 082
083 ⇔ 093
094 ⇔ 163
164 ⇔ 174
175 ⇔ 223
224 ⇔ 255| No function (shutter open)
Shutter effect, slow to fast No function (shutter open) Pulse effect in sequences No function (shutter open) Random effect, slow to fast No function (shutter open)
7| Cyan| 000 ⇔ 255| 0–100%
8| Magenta| 000 ⇔ 255| 0–100%
9| Yellow| 000 ⇔ 255| 0–100%
10| CTO| 000 ⇔ 255| 0–100%
11| Color wheel| 000 ⇔ 004
005 ⇔ 009
010 ⇔ 013
014 ⇔ 018
019 ⇔ 022
023 ⇔ 027
028 ⇔ 031
032 ⇔ 187
188 ⇔ 219
220 ⇔ 223
224 ⇔ 255| Open
Red Orange Dark green Cyan Congo blue UV
Split color
Color scroll, fast to slow Stop
Reverse color scroll, slow to fast
12| Rotating gobo wheel| 000 ⇔ 005
006 ⇔ 010
011 ⇔ 015
016 ⇔ 020
021 ⇔ 025
026 ⇔ 030
031 ⇔ 035
036 ⇔ 040
041 ⇔ 055
056 ⇔ 070
071 ⇔ 085
086 ⇔ 100
101 ⇔ 115
116 ⇔ 130
131 ⇔ 145
146 ⇔ 200
201 ⇔ 255| Open
Gobo 1 (Barking up a flaming river)
Gobo 2 (Floyd)
Gobo 3 (Sparse branches)
Gobo 4 (Something linear)
Gobo 5 (Super max)
Gobo 6 (Windowpane)
Gobo 7 (Shower glass)
Gobo 1 shaking, slow to fast
Gobo 2 shaking, slow to fast
Gobo 3 shaking, slow to fast
Gobo 4 shaking, slow to fast
Gobo 5 shaking, slow to fast
Gobo 6 shaking, slow to fast
Gobo 7 shaking, slow to fast
Gobo scroll, static to fast
Reverse gobo scroll, static to fast
13| Gobo 1 rotation| 000 ⇔ 191
192 ⇔ 223
224 ⇔ 255| Gobo rotation, slow to fast
Stop
Reverse gobo rotation, slow to fast
14| Static gobo wheel| 000 ⇔ 005
006 ⇔ 010
011 ⇔ 015
016 ⇔ 020
021 ⇔ 025
026 ⇔ 030
031 ⇔ 035
036 ⇔ 040
041 ⇔ 045
046 ⇔ 060
061 ⇔ 075
076 ⇔ 090
091 ⇔ 105
106 ⇔ 120
121 ⇔ 135
136 ⇔ 150
151 ⇔ 165
166 ⇔ 210
211 ⇔ 255| Open
Gobo 1 (Dotty)
Gobo 2 (Stones)
Gobo 3 (Leafiness)
Gobo 4 (Busted burlap)
Gobo 5 (EVH)
Gobo 6 (Basketcase)
Gobo 7 (CaChow)
Gobo 8 (Grass vignette)
Gobo 1 shaking, slow to fast
Gobo 2 shaking, slow to fast
Gobo 3 shaking, slow to fast
Gobo 4 shaking, slow to fast
Gobo 5 shaking, slow to fast
Gobo 6 shaking, slow to fast
Gobo 7 shaking, slow to fast
Gobo 8 shaking, slow to fast
Gobo scroll, static to fast
Reverse gobo scroll, static to fast
15| Animation wheel| 000 ⇔ 003
004 ⇔ 127
128 ⇔ 131
132 ⇔ 255| Open / No function
Clockwise rotation, fast to slow
Stop
Counterclockwise rotation, slow to fast
16| Framing shutter rotation| 000 ⇔ 127
128
129 ⇔ 255| Rotation, left to center
Stop
Rotation, center to right
17| Framing shutter 1
movement| 000 ⇔ 255| Movement, outward to inward
18| Framing shutter 1 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
19| Framing shutter 2 movement| 000 ⇔ 255| Movement, outward to inward
20| Framing shutter 2 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
21| Framing shutter 3 movement| 000 ⇔ 255| Movement, outward to inward
22| Framing shutter 3 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
23| Framing shutter 4 movement| 000 ⇔ 255| Movement, outward to inward
**24| Framing shutter 4 swiveling| 000 ⇔ 127
128
129 ⇔ 255| Swiveling from -25° to 0°
0°
Swiveling from 0° to +25°
25| Focus| 000 ⇔ 255| 0–100%
26| Zoom| 000 ⇔ 255| 0–100%
27| Prism| 000 ⇔ 127
128 ⇔ 255| No function
Prism effect
28| Prism rotation| 000 ⇔ 127
128 ⇔ 189
190 ⇔ 193
194 ⇔ 255| Prism indexing
Clockwise rotation, fast to slow Stop
Counterclockwise rotation, slow to fast
29| Iris| 000 ⇔ 192
193 ⇔ 213
214 ⇔ 234
235 ⇔ 255| Large to small
Auto change, slow to fast Open, slow to fast
Close, slow to fast
30| Frost| 000 ⇔ 255| 0–100%
31| Frost fine| 000 ⇔ 255| Fine control (16-bit)
32| Control (hold for 3 seconds)**| 000 ⇔ 007
008 ⇔ 015
016 ⇔ 023
024 ⇔ 031
032 ⇔ 039
040 ⇔ 047
048 ⇔ 055
056 ⇔ 063
064 ⇔ 071
072 ⇔ 079
080 ⇔ 087
088 ⇔ 095
096 ⇔ 103
104 ⇔ 111
112 ⇔ 119
120 ⇔ 127
128 ⇔ 135
136 ⇔ 143
144 ⇔ 151
152 ⇔ 255| No function
Reset all
Pan & tilt reset
Effects reset (prism, iris, frost) Gobo reset
Shutter module reset
Other reset (zoom, focus reset) Color reset (CMY + CTO + color) Absolute silence off
Absolute silence on Steady off
Steady mode 1 (environment temperature 26 °C) Steady mode 2 (environment temperature 35 °C) Linear dimmer
Square dimmer curve Inverse square dimmer curve S-curve dimmer
Fast dimmer mode Smooth dimmer mode No function

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico:www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany:www.chauvetlighting.eu/warranty- registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Warning for North America, and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.