DOMETIC SabreLink Flex Awnings Lighting System User Guide

: June 7, 2024
: Dometic

DOMETIC SabreLink Flex Awnings Lighting System

Diagrams

Explanation of Symbols

WARNING!
Safety Instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION!
Safety Instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE!
Indicates a situation that, if not avoided, can result in property damage.

NOTE
Supplementary information for operating the product.

Safety Instructions

General Safety

WARNING! Failure to obey these warnings could result in death or serious injury.

Electrocution Hazard

If this device’s power cable is damaged, the power cable must be replaced by the manufacturer, a service agent or a similarly qualified person in order to prevent safety hazards.
This device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
Avoid the power cord, plug or other electrical parts to get in contact with water or any other liquid.

Health Hazard

This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.

Operating the Device Safely

WARNING! Failure to obey these warnings could result in death or serious injury.

Electrocution Hazard

Do not operate the device if it is visibly damaged.
Do not operate the device if any of the components have been sub-jected to moisture.
Only use accessories that are recommended by the manufacturer.
Do not modify or adapt any of the components in any way.

Fire Hazard

When positioning the device, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power sup-plies at the rear of the device.

CAUTION! Failure to obey these cautions could result in minor or moderate injury.

Health Hazard

When positioning the device, ensure that all cables are suitably secured to avoid any form of trip hazard.

NOTICE! Indicates a situation that, if not avoided, can result in property damage.

Check that the voltage specification on the type plate corresponds to that of the energy supply.
Ensure that the mains power adapter is plugged into an outlet that has an residual current device.
Never pull the plug out of the socket by the cable.
Never immerse the device in water.
Protect the device and cables against heat and moisture.
The device shall not to be exposed to rain.

Scope of Delivery

Starter Kit

No. in Fig. 1

|

Quantity

|

Description

---|---|---

1

|

1

| Remote control

2

|

1

| Remote receiver

3

|

1

| 6 m DC cable

4

|

1

| 3 m AC cable with power adapter

5

|

1

| 1.5 m velcro strip

6

|

1

| LED light

Add-on Kit

No. in Fig. 1

|

Quantity

|

Description

---|---|---

1

|

1

| LED light

2

|

1

| 3 m connection cable

3

|

1

| 1.5 m velcro strip

Intended Use

The lighting system is suitable for:

Interior illumination within tents or awning tents
Indoor use only

The lighting system is not suitable for:

Outdoor use

This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or mainte-nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:

Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.
The radio equipment of the device complies with the requirements of the directive 2014/53/EU. You can find the Declaration of Conformity of the device on documents.dometic.com.

Technical Description

The lighting system is designed for operation with AC power or DC power. Up to three LED lights can be linked together using one power adapter.

Control Elements

No. in Fig 3

|

Description

---|---

1

|

On/off button

2

|

+ and – buttons

3

|

Percentage buttons

Installing the Device

Starter Kit

Proceed as shown (fig. 5, page 4 – fig. 7, page 4).

Add-on Kit

Proceed as shown (fig. 8, page 4).

Using the Device

Before First Use

Remove the plastic tab from the remote control’s battery.
Pair the remote control to the remote receiver (fig. 10, page 5).

Switching on and off

Proceed as shown (fig. 9, page 4).

Dimming the Light

To dim the light continuously ,proceed as shown (fig. 11, page 5).
To dim the light in percentage steps, proceed as shown (fig. 12, page 5).

Changing the Battery of the Remote Control

Replace the battery with a battery of the same type (3 V CR2025, see fig. 4, page 3).

Storing the Device

Store the device in a clean, dry and dust-free space.

Cleaning and Maintenance

WARNING! Electrocution Hazard
Unplug the device from the power supply before cleaning and maintenance.

NOTICE!

Never clean the device under running water or in dish water.
Do not use sharp or hard objects, abrasive cleaning agents or bleach during cleaning as these can damage the device.

Occasionally clean the device with a soft, damp cloth.

Troubleshooting

Fault

|

Possible Cause

|

Solution

---|---|---
The remote control does not work.| The plastic tab that isolates the battery has not been removed before first use.| Remove the plastic tab.
The battery of the remote control is empty.| Replace the battery with a battery of the same type (see chapter “Changing the battery of the remote control” on page 11).
The remote receiver is placed within a metal enclosure or another closed-off location and therefore the RF wireless signal is compromised.| Place the remote receiver away from any metal enclosure or closed-off locations.
The remote control is not paired to the remote receiver correctly.| Pair the remote control to the remote receiver (see chapter “Before first use” on page 11).

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the product:

A copy of the receipt with purchasing date
A reason for the claim or description of the fault

Disposal

Place the packaging material in the appropriate recycling waste bins, wherever possible.

If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.