NITECORE NU20 360 Luman USB Recharable Headlamp User Manual
- June 7, 2024
- Nitecore
Table of Contents
The All-Round Flashlight Expert
NU20/NU20 CRI
User Manual
Features
- Highly portable headlamp
- Multiple colour temperature options are available
- NU20: Fitted with a CREE XP-G2 S3 LED
- NU20 CRI: Fitted with a Nichia 219B LED, CRI90
- Built-in Li-ion battery provides runtime up to 100 hours
- The onboard USB charging circuit
- Single switch user interface design offers easy one-handed operation
- Built-in power indicator (Patent No. ZL201220057767.4)
- 4 brightness levels and 2 special modes are available
- Unique switch guard to prevent accidental activation
- Textured reflector
- 52°adjustable illumination angle
- Made from durable PC materials
- Lightweight and compact dimensions
- Impact-resistant to 1 meter
Dimensions
Size:
|
2.18″x1.29″x0.82″(with bracket)
---|---
Weight:| 31g (1.09oz) (with battery and bracket, without headband)
Accessories
USB cord, headband, holder
Output & Runtime
NU20
FL 1 STANDARD
| TURBO| HIGH| MID| ULTRALOW| SOS|
BEACON
---|---|---|---|---|---|---
|
360
LUMENS
|
220
LUMENS
|
40
LUMENS
|
1
LUMEN
|
360
LUMENS
|
360
LUMENS
| *30min| 6h| 7h45min| 100h|
–
|
–
| 80m| 60m| 27m| 5m|
–
|
–
| 1600cd| 920cd| 180cd| 6cd|
–
|
–
| 1 m (Impact Resistant)
| IPX7, 1m (Waterproof AND Submersible)
NU20 CRI
FL 1 STANDARD
| TURBO| HIGH| MID| ULTRALOW| SOS|
BEACON
---|---|---|---|---|---|---
|
270
LUMENS
|
170
LUMENS
|
30
LUMENS
|
1
LUMEN
|
270
LUMENS
|
270
LUMENS
| *30min| 6h| 7h45min| 100h|
–
|
–
| 69m| 45m| 19m| 3m|
–
|
–
| 1200cd| 500cd| 90cd| 3cd|
–
|
–
| 1 m (Impact Resistant)
| IPX7 , 1m (Waterproof AND Submersible)
NOTICE: Stated data has been measured in accordance with the
international flashlight testing standards ANSUNEMA FL1 using an integrated
and fully charged 3.7V 600mAh rechargeable Li-ion battery under laboratory
conditions.
End-user results may vary due to individual usage habits and environmental
conditions.
- The runtime for Turbo mode is the testing result before starting temperature regulation.
Operating Instructions ON/OFF
Draw out the NU20/NU20 CRI to expose the switch from the switch guard as illustrated in the diagram below, press the switch to turn the light on, pressing the switch again after 3 seconds to turn the light off.
Note: Pressing the switch again within 3 seconds from when the
light is turned on will I switch output to the next available brightness.
Brightness Adjustment
Press the switch repeatedly within 3 seconds from the Initial activation will
switch output from ultralow-mid-high-off.
Pressing the switch again after 3 seconds from Initial activation turns the
light off.
Access to Turbo
With the light turned on, hold down the switch for more than 1 second to enter
turbo mode (360 lumens for NU20 and 270 lumens for NU20 CRI).
Note: The turbo mode will run for 30 seconds before stepping down to the
next available output to prevent overheating.
Special Modes (SOS/Location Beacon)
With the light turned off, hold down the switch for over 3 seconds to enter
SOS, pressing the switch again within a 3-second interval to switch to the
location beacon. To exit special mode, press the switch in location beacon
mode, alternatively, cease any operation for 3 seconds then press the switch
again.
Power Tips
With the light turned off, hold down the switch for 1 second, the power
indicator will blink to indicate remaining battery power upon the release of
the switch: 3 blinks represent battery power above 50%, 2 blinks represent
battery power below 50%, 1 blink represents battery power below 10%. Note:
Recharge the product when output appears to be dim and/or unresponsive.
Recharging
- This product is USB rechargeable. Raise the micro-USB port cover to expose the charging port, connect the port to a power supply with a USB cord to initiate the charging process. Fully charges the battery take approximately 2 hours.
- Charging Tip: A red light under the switch will be lit to indicate charging in progress, and it will turn green upon charging completion.
Warranty Details
All NITECORE products are warranted for quality. Any defective /malfunctioning
NITECORE product can be repaired free of charge for a period of 20 months from
the date of purchase. Beyond 24 months, a limited warranty applies, covering
the cost of labor and maintenance, but not the cost of accessories or
replacement parts.
The warranty is nullified in either or both of the following situations:
- The products)easier broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged through improper use.
For the latest information on NITECORES products and services, please contact
a local NITECORE® distributor or send an email to
service@nitecore.com.
***** All images, text, and statements specified herein in this user manual
are for reference purposes only. Should any discrepancy occurs between this
manual and information specified on
www.nitecore.com, information on our official
website shall prevail.
SYSMEX Innovations Co.. Ltd. reserves the right to Interpret and amend the
content of this document at any time without prior notice.
Please find us on Facebook:
NITECORE Flashlight
SYSMEX Innovations Co., Ltd.
TEL: +86-20-8
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower,
No.5 Xiancun Road,
Tianhe District, Guangzhou,510623,
Guangdong,
China
Made in China
Thanks for purchasing NITECOREI
NU12032021