geeni 2983588 Smart WiFi Water Sensor User Guide
- June 7, 2024
- Geeni
Table of Contents
SMART WI-FI WATER SENSOR
START GUIDE
Thank you for purchasing your GEENI smart home product. Get started using your
new devices by downloading Geeni, one convenient app that manages everything
straight from your phone or tablet. Easily connect to your home Wi-Fi and
control multiple devices from the touch of your fingertips.
**What’s in the Box
**
- Smart Sensor
- Holder
- Sensor Probe
- Screws
- Screw Protectors
- Adhesive Stickers
- User Manual
Get Ready
- · Know your Wi-Fi network and password
- Make sure your mobile device is running iOS® 9 or higher or AndroidTM 5.0 or higher
- Make sure you’re connected to a 2.4GHz Wi-Fi network (Geeni can’t connect to 5GHz networks)
- Connect your sensor to the Geeni app before installing it.
-
Download the Geeni app.
-
Register a Geeni account.
** STEP 1. Enter your mobile phone number or email address.|
---|---
STEP 2. Enter the verification code and create a password.|
STEP 3**. Enter your information
to log in.|
-
Activate
STEP 1.
Twist and pull the sensor’s cover to remove it, then press and hold the
Reset Button for 6 seconds. The LED Indicator Light will begin to rapidly
flash, indicating that your sensor is ready to connect via Easy Mode.| 
---|---
What does the blinking light mean?
Reset the sensor by pressing and holding the Reset Button for 6 seconds. The
LED Indicator Light will begin to flash rapidly.
– Reset one time (press and hold) to reach Easy Mode (Rapidly blinking blue,
2x per second)
– Reset again (press and hold) to reach AP Mode (Slowly blinking blue, 3x per
second)
Note : You must remove the sensor’s cover to view the Reset Button and
LED Indicator Light.
- Connect: Easy Mode
STEP 1.
In the Geeni app, on the top
corner of the Devices screen,
click (+). Choose “Sensors“.|
---|---
STEP 2.
Make sure the sensor’s LED Indicator Light is rapidly flashing blue. If it is not, press and hold the Reset Button for 6 seconds. Once the LED Indicator Light is
rapidly flashing blue, press “Next Step” in the Geeni app.|
STEP 3.
Enter your Wi-Fi network and
password.|
STEP 4.
The Geeni app will connect
to your device.|
***** If the connection fails, try to connect using AP Mode.
-
Connect: AP Mode
STEP 1.
Make sure the sensor’s LED Indicator Light is slowly flashing blue. If it is not, follow the instructions on page 5 to reset.STEP 2.
In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Smart Sensors“. Choose “AP Mode” in the top corner.|
STEP 3.
Click “Next” and enter your Wi-Fi details.|
STEP 4.
Follow the instructions to choose the device from your Wi-Fi list.|
STEP 5.
The Geeni app will connect to
your device.|
-
Installation
Step 1.
Use the included adhesive or screw to mount the sensor’s Holder to your desired location.
Note: If you wish to use the Sensor Probe, be mindful of the Holder’s Sensor Probe input jack when you consider placement.
*** The Sensor Probe is optional—the Main
Sensor can operate without the Sensor Probe.
Step 2.
Plug the Sensor Probe into the input jack on the Holder and ensure that the Sensor Probe is placed where you wish to detect liquid.
Step 3.**
Snap the Main Sensor into the Holder and turn it until you hear the Main Sensor’s prongs click into alignment with the Holder. -
Functions
The sensor will send notifications within 3–5 seconds of being triggered.|
---|---
Select “History” to view recent sensor activations.| 
Select “Notice” to turn the sensor alerts on or off.| 
Connect multiple Geeni devices to set automatic actions when the sensor is
triggered.| 
Frequently Asked Questions
-
Can I share with family and friends?
Yes, you can share access to all Geeni devices–cameras, bulbs, sensors, etc.–with family and friends. In the Geeni app, press Profile and click on “Device Sharing to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account. -
How many devices can I control?
Geeni’s app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router. -
My sensor has a funny name. How do I rename it?
From your main device list, click on the sensor that you want to rename, press the “···” button on the top right for advanced settings, and click “Modify Device Name “. You’ll then be able to choose a more familiar name.
-
What should I do if the sensor appears offline or unreachable?
Make sure your Wi-Fi router is online and in range and check that you have the latest Geeni functionality by clicking “Check for firmware update” in your device settings. -
What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data. -
If my Wi-Fi/internet goes down, will Geeni still work?
Geeni products need to be connected to Wi-Fi in order to use them remotely.
Troubleshooting
Unable to connect to your Wi-Fi network? Make sure you entered the correct Wi- Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Reset the device
Press and hold the Reset Button for 6 seconds. – Reset one time (press and
hold) to reach Easy Mode
(Rapidly blinking blue) – Reset two times (press and hold) to reach AP Mode
(Slowly blinking blue)
System Requirements
- Mobile device running iOS® 9 or higher or AndroidTM 5.0 or higher · Existing Wi-Fi network
Technical Specifications
- Battery: CR2-3V x 1
- Standby Battery Life: 2 years
- Standby Current: 13uA
- Working Battery Life: 1 year (15 times/day);
- Working Current: 100mA-110mA 2 years (7 times/day)
- Wi-Fi: IEEE 802.11N, 2.4GHz(not compatible with 5GHz Wi-Fi networks)
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the two following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Important Information :
Before installing, read and follow all precautions, including the following:
CAUTION: Suitable for indoor use only.
DO NOT IMMERSE IN WATER. DO NOT EXCEED RATED CAPACITY.
Support:
If you encounter any issues, please contact us at
support@mygeeni.com for help. To explore our
full selection of products, visit us at:
www.mygeeni.com
888-232-3143 Toll-free
© 2019 Merkury Innovations
- 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple, and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Assistant, Google Play, and the Google Play logo are trademarks of Google Inc. Google is a trademark of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Cortana is a registered trademark of Microsoft Corporation. All other trademarks and trade names are those of their respective owners.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in China
Connexion impossible? Besoin d’aide?
NE RETOURNEZ PAS CE PRODUIT AU
Soutien Geeni : support@mygeeni.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>