estelle ESNFRLEDMKA Wireless Near-Infrared LED Photon Mask User Guide

June 7, 2024
ESTELLE

estelle - Logo

USER GUIDE

estelle ESNFRLEDMKA Wireless Near-Infrared - Cover

WIRELESS NEAR-INFRARED
LED PHOTON MASK

ESNFRLEDMKA

SAFETY & WARNINGS

Read all instructions in this guide before using this product. Retain this guide for future reference.

  • Children, pregnant women and elderly people should consult their doctor before using this product.
  • If you experience any skin irritations after using this product, discontinue use immediately, and consult a specialist.
  • Do not throw or drop this product.
  • Always store in a safe location, in the original packaging and out of reach of children.
  • Do not store in any environment that experiences extreme temperatures.
  • Do not store in high humidity environments.
  • Do not store in direct sunlight or near any sources of heat.
  • Exposure to magnets and devices that emit a magnetic field may cause this product to malfunction.
  • Ensure the charging terminals of this product do not come in contact with metal objects and liquids.
  • If this product malfunctions or shows any sign of damage, cease use immediately and contact help.Kogan.com for support.
  • Do not disassemble, repair or modify this product in any way.
  • To reduce the potential risk of fire, while in use, do not leave this product on a blanket.
  • Always turn the power off when not in use. · If this product is not being used for an extended period, ensure the battery is fully charged at least once every 3 months.

WARNING — KEEP BATTERIES OUT OF REACH OF CHILDREN

  • Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus.
  • If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
  • Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
  • Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
  • Tell others about the risk associated with button batteries and how to keep their children safe.

COMPONENTS

estelle ESNFRLEDMKA Wireless Near-Infrared -
COMPONENTS

OVERVIEW

Remote Control:
estelle ESNFRLEDMKA Wireless Near-Infrared - Remote
Control Mask:
estelle ESNFRLEDMKA Wireless Near-Infrared - Mask

GETTING STARTED

Charging
Before first use, the LED mask will need to be fully charged. Charging time is approximately 3 hours (charging time may vary depending on the battery’s status).

  1. Connect the USB charging cable to the mask’s USB input.
  2. Connect the USB connector to a 5V 1A power adapter (phone charger) or USB port on your computer.
  3. When the power button on the LED mask turns green, the battery is fully charged and ready for use.
    estelle ESNFRLEDMKA Wireless Near-Infrared - Charging

The colour of the power button’s indicator will change depending on the charging status of the battery:

Power button indicator Flashing RED Battery status
Flashing GREEN Battery charging / low battery warning
Solid GREEN Battery partially charged / okay for use
Power button indicator Flashing RED Battery fully charged

Remote Control

  1. Open the battery compartment cover on the remote control.
  2. Remove the plastic battery pull tab.
  3. Hold the remote control within 30cm of the LED mask and select the desired mode using the button on the remote control.
  4. The product will automatically turn off when the set mode and corresponding time are finished.
    estelle ESNFRLEDMKA Wireless Near-Infrared - Remote Control
2

Preparing your Skin
Before use, ensure your face is cleansed and free of make-up.

  1. Remove any make-up from your face.
  2. Clean your face using a facial cleansing product.
  3. For optimal results, apply skin care products before placing the mask on your face.
    estelle ESNFRLEDMKA Wireless Near-Infrared - Preparing your
Skin

OPERATION

Ensure the battery is sufficiently charged before using the mask. Press the power button on the mask, if the indicator flashes green, it is ready for use.

  1. Turn on the mask by pressing the power button.

  2. Before and after using the product, wipe the inside and outside of the product with a soft cloth.

  3. Adjust the head band and the chin rest to the appropriate size. The inner side of the
    LED mask should be resting comfortably on your face.
    estelle ESNFRLEDMKA Wireless Near-Infrared - OPERATION

  4. Referring to the table below, use the button on the remote control to select the desired mode.
    Mode| LED Colour| Timer
    ---|---|---
    Red 5| Red & near infrared (NIR) LEDs| 5 minutes
    Red 10| Red & near infrared (NIR) LEDs| 10 minutes
    Blue 5| Blue LEDs| 5 minutes
    Blue 10| Blue LEDs| 10 minutes
    Auto| Red & near infrared (NIR) then Blue| 20 minutes (total)

LED Colour Benefits

  • RED & NIR: Helps to improve skin brightness, elasticity, moisture and reduce roughness.
  • BLUE: Helps to calm sensitive skin.
    Note: User’s may experience varying results depending on chosen skin care products and differences in complexion.

SPECIFICATIONS

Voltage : DC 5V 1A
Material : ABS
Battery : 3.7V / 1,000mAh Lithium polymer
Remote Control Range : 3m
Dimensions (W x L x H) : 195 x 223 x 93mm
Weight : 314g

NOTES
_____

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
Kogan - Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals