ACU-RITE PC Connect Software Installation Guide
- June 7, 2024
- ACU-RITE
Table of Contents
PC Connect Software
Installation
-
If you have previous versions of Acu-Link PC Connect that are running, it is recommended that you quit the running application before installing the new software.
If you have PC Connect Version 2.0 installed, we recommend UN-INSTALLING that software first. -
Connect the small end of the USB cable to the display console
-
Connect the large end of the USB cable to your PC
-
The Display Console USB functions are OFF (mode 2) by default. Make sure your display console is powered on and receiving weather data from the 5-in-1 sensor. Then Choose USB mode 3 for full functionality.
-
Download the latest PC Connect Software. Click on the “setupacu-link” file and follow the instructions to install Acu-Link PC Connect software Note that upon starting the software, it may take at least 18 seconds to receive and display the weather data from the connected Display Console. (the software will display “– –” or default values until live data is received.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>