Kraus KPF-2822 Oletto Single Handle Bar Faucet Installation Guide
- June 7, 2024
- Kraus
Table of Contents
Kraus KPF-2822 Oletto Single Handle Bar Faucet Installation Guide
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. APR 08, 2021
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:
Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with
purchase date for reference.
If for any reason this product does not meet your expectations, please be sure
to repack this product in the original box and packaging material to avoid
damage during transit.
Prior to Installation:
- Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
- Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure
- Pre-drilled countertop hole size requirement: 1-3/8”(min)
- Max countertop thickness: 2 3/4”
Tools you will need:
Diagram and Parts List
Faucet Dimension
Installer Tip:
Shut off main water supply before installing new faucet.
Step 1: Remove washers and mounting nut
Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting nut & screws (F&G), metal washer (E) and plastic washer (D) from the faucet (A).
Step 2: Installing the faucet
Place faucet (A) through the hole in countertop. Secure the faucet (A) to the
countertop using the plastic washer (D), metal washer (E) and
mounting nut (F) provided. Tighten screws (G).
Step 3: Connect waterlines to main valve
Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON)
NOTE : Please make sure filter washers are installed before connecting to the main valve
Step 4: Flush faucet
After installing faucet, remove aerator (B) with a coin. Turn water on for 30 seconds to remove any debris. Reassemble aerator (B).
Replacement Parts
*Denotes faucet component color options:
SFS – Spot Free Stainless Steel
MB – Matte Black
SFACB – Spot Free Antique Champagne Bronze
SFSB – Spot Free Black Stainless
BB – Brushed Brass
GR – Grey
BL – Black
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Care & Maintenance
*To keep the product clean & shining, follow the steps below：
- Rinse with clean water & dry with a soft cloth
- Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
- Do not use cloth with a coarse surface
- Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
Codes/Standards Applicable:
Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by
Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household
use of the “Faucet” in its original location.
The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects
in material and workmanship under normal usage for the lifetime of the
product. The warranty commences from the initial date of purchase by the owner
or
trade professional, from an authorized Kraus dealer, through the lifetime of
the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead
assembly (includes engine, aerators, structure, restrictors, back flow
preventers, sprayer hoses, braided supply line hoses which encompasses
nylon,silicon and stainless steel, etc) of the product to be free from defects
in material and workmanship under normal usage for a period of one (1) year.
The warranty commences from the initial date of purchase by the owner or trade
professional, from an authorized Kraus dealer, through the one (1) year term
of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free
from defects in material and workmanship under normal usage for a period of
five (5) years. The warranty commences from the initial date of purchase by
the owner or trade professional, from an authorized Kraus dealer, through the
five (5) year term of the original owner or end-user.
Kraus warrants all electronic parts other than batteries to be free from defects in material and workmanship for a period of two (2) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the two (2) year term of the original owner or end-user. No warranty is provided on batteries.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and
reinstallation of said product. This warranty does not allow recovery of
incidental or consequential damages, such as loss of use, delay, property
damage, or other consequential damages, and Kraus accepts no liability for
such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No
additional warranties, express or implied, are given, including but not
limited to any implied warranty of merchantability or fitness for a particular
purpose.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
- Proof of purchase.
- A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
References
- Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
- Care & Maintenance | Well-crafted products | Light maintenance.
- Kraus USA Self Help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>