Kraus KVF-1220 Ramus Single Handle Vessel Faucet Installation Guide
- June 7, 2024
- Kraus
Table of Contents
**Kraus KVF-1220 Ramus Single Handle Vessel Faucet Installation Guide
**www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. APR 08, 2021
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely
installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with
purchase date for reference.
If for any reason this product does not meet your expectations, please be sure
to repack this product in the original box and packaging material to avoid
damage during transit.
Prior to Installation:
- Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement
- Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure
- Pre-drilled countertop hole size requirement: 1-3/8″(min) · Max countertop thickness: 2 1/2″
Tools you will need:
Diagram and Parts List
Faucet Dimension
Installer Tip:
Shut off main supply before installing new faucet.
Installer Tip:
Shut off water supply before installing new faucet.
Step 1: Remove washers and mounting nut
Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting nut & screws (F&G), metal washer (E) and plastic washer (D) from the faucet (A).
Step 2: Installing the faucet
Place faucet (A) through the hole in countertop. Secure the faucet (A) to the countertop using the plastic washer (D), metal washer (E) and
mounting nut (F) provided. Tighten screws (G).
Step 3: Connect waterlines to main valve
Attach waterlines to angle stops and tighten until snug. Turn on angles stops
and check for leaks (DO NOT TURN FAUCET ON)
NOTE are installed before connecting to the main valve
Step 4: Install Press pop-up assembly
Unscrew the nut (6) from the pop-up body (2), move over the tail pipe (7) and washer (5), then unscrew the coupling nut (4) and remove the washer (3).
Step 4: Install Press pop-up assembly
Place the washer (1) underneath the flange of the pop-up body (2). Slide the pop-up body (2) down through the drain hole on the vessel or basin. From underside, slide the washer (3) against the bottom of the vessel or basin, thread on the coupling nut (4) and tighten. Do not overtighten.
Slide the nut (6) over the tail pipe (7). Place the washer (5) into the nut and tighten. Do not overtighten.
Step 5: Flush faucet
After installing faucet, remove aerator (B) with a coin. Turn water on for 30 seconds to remove any debris. Reassemble aerator (B).
Replacement Parts
*Denotes faucet component color options:
SFS – Spot Free Stainless Steel
MB – Matte Black
GM – Gunmetal
BG – Brushed Gold
GR – Grey
BL – Black
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps:
Care & Maintenance
To keep the product clean & shining, follow the steps below：
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
This installation manual is subject to change without further notice.
Codes/Standards Applicable:
Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by
Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non- transferable.
Kraus warrants the structure and finish of the product to be free from defects
in material and workmanship under normal usage for the lifetime of the
product. The warranty commences from the initial date of purchase by the owner
or trade professional, from an authorized Kraus dealer, through the lifetime
of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead
assembly (includes engine, aerators, structure, restrictors, back flow
preventers, sprayer hoses, braided supply line hoses which encompasses
nylon,silicon and stainless steel, etc) of the product to be free from defects
in material and workmanship under normal usage for a period of one (1) year.
The warranty commences from the initial date of purchase by the owner or trade
professional, from an authorized Kraus dealer, through the one (1) year term
of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free
from defects in material and workmanship under normal usage for a period of
five (5) years. The warranty commences from the initial date of purchase by
the owner or trade professional, from an authorized Kraus dealer, through the
five (5) years term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective
within the warranty period will be repaired or replaced with a product of
equal value at the option of Kraus. This warranty extends to the original
owner or end-user, and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products,
whether such items are purchased at discount outlets, unauthorized dealers,
and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper
installation, carelessness, accident, hard water or mineral deposits, exposure
to corrosive materials, misapplication, damages caused by improper
maintenance, alteration of the product, or failure to follow care or
installation instructions enclosed with your product. Avoid using abrasive
cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using
abrasive pads, steel wool, or wire brushes, as these will damage and wear down
the finish.
This warranty does not apply to Products that have not been installed or
operated in accordance with instructions supplied by Kraus and all applicable
rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully
insured and licensed trade professional. Kraus insists that such professionals
have experience in the installation of bathroom and kitchen manufactured
goods.
This warranty does not cover labor charges or costs of removal and
reinstallation of said product. This warranty does not allow recovery of
incidental or consequential damages, such as loss of use, delay, property
damage, or other consequential damages, and Kraus accepts no liability for
such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or
implied, including warranties of merchantability and fitness for a particular
purpose, or compliance with any code.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of
products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No
additional warranties, express or implied, are given, including but not
limited to any implied warranty of merchantability or fitness for a particular
purpose. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state.
If you are a homeowner please contact a Kraus Customer Service
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a
Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
- Proof of purchase.
- A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
References
- Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
- Care & Maintenance | Well-crafted products | Light maintenance.
- Kraus USA Self Help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>