REHABMART Screen Capture Instruction Manual
- June 7, 2024
- RehabMart
Table of Contents
REHABMART Screen Capture Instruction Manual
INSTRUCTION
-
Step 1: Ensure that the screws on the EKG / ECG belt are tightly closed.
-
Step 2: Connect the EKG / ECG patient cable to the screws using ECG clip adaptors.
-
Step 3: Connect the EKG / ECG patient cable to each of the 4 limb clamps.
-
Step 4: Wet the 6 electrodes & 4 limb clamps with tap water.
-
Step 5: When the patient is lying down comfortably. apply the belt on patient chest with V1 & V2 symmetrically on both sides of the sternum.
-
Step 6: Apply the second strap below & then above the second arm.
-
Step 7: Close the buckles over V1 & V2.
-
Step 8: new way to make EKG test.
WEB: www.RehabMart.com
Read User Manual Online (PDF format)
Loading......