Kraus Artec Pro 2 Function Commercial Style Kitchen Faucet KPF-1603 Instruction Manual

: June 7, 2024
: Kraus

Table of Contents

Kraus Artec Pro 2 Function Commercial Style Kitchen Faucet KPF-1603
Prior to Installation
Tools Required
Diagram and Parts List
Faucet Installation Procedure
Replacement Parts
Troubleshooting
Care & Maintenance
- Codes/Standards Applicable
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kraus Artec Pro 2 Function Commercial Style Kitchen Faucet KPF-1603

Product Image

Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation

Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
Flush angle stops to release any debris prior to installation.
Pre-drilled hole size requirement: 1 3/8″ (min)
Max countertop thickness: 2 3/8″

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or customerservice@kraususa.com

Tools Required

Diagram and Parts List

A. Faucet Body
B1. Seat
B2. Rubber Washer
B3. Metal Washer
B4. Mounting Nut
B5. Screw
C. Hex Wrench

Faucet Installation Procedure

Installer Tip:

Shut off main water supply before installing new faucet.

Step 1. Remove washer and lock nut
Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove mounting hardware (B) from faucet body (A).

Step 2. Install faucet
Insert faucet through hole in sink or countertop. From underneath sink, attach the seat (B1), rubber washer (B2), metal washer (B3), and nut (B4). Lock nut (B4) into position by tightening screws (B5).

Step 3. Making the water supply connections
Push the quick connector (2) firmly upward and attach it to the receiving block (1). Pull down moderately to ensure the connection has been made.
If it is necessary to remove the quick connector (2), squeeze the tabs on the hose and then pull down to disconnect.

Step 4. Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten.

NOTE: Please make sure filter washers are installed before connecting to the main valve.

Step 5. Flushing and checking for leaks
Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet on to the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away any debris that could cause damage to internal parts. Check for leaks.
Reinstall the spray head by hand tightening it back onto the spray hose.

NOTE:

Do not lose the rubber washer (1) when installing the sprayer back on.
The magnet end marking with a black dot should be toward the hose for correct magnet installation.

Step 6. Flush faucet
To activate the spray mode, simply press the handle (1) located under the spray head.

Replacement Parts

Replacement Parts List

|

Finish/Color

|

Part #

---|---|---
1. Spray Head|

CH,SFS,SBBG,SFSB,SFACB,
MBSB,BG,SFSMB,BGMB**

|

KP27060

2. Magnet| |

KP27061

3. Spray Hose Assembly|

BLBG,BLSFS,BLSB,BLSFACB GRCH,GRSFS,BLSFSB**

|

KP27062*

4. Spring|

CH,SFS,BG,SB,SFACB,SFSB**

|

KP27063

5. Inverter| |

KP27080

6. Spray Support Assembly|

CH,SFS,SBBG,SB,BG, SFSMB,
BGMB,SFACB,SFSB**

|

KP27064

7. Spout Nut|

CH,SFS,BG,
MB,SB,SFACB,SFSB**

|

KP27065

8. Spout|

CH,SFS,SB,BG,MB,
SFACB,SFSB**

|

KP27066

9. Diverter|

|

KP27067

10. Aerator Assembly|

CH,SFS,BG,MB,SB,
SFACB,SFSB**

|

KP27068

11. Cartridge| |

KP27069

12. Bonnet Nut| |

KP27070

13. Cap|

CH,SFS,BG,MB,SFACB**

|

KP27071

14. Handle Assembly|

CH,SFS,BG,MB,SFACB**

|

KP27072

15. Rubber & Metal Washer| |

KP27028

16. Mounting Nut & Nut| |

KP27079

17. Block| |

KP27073

18. Flange|

CH,SFS,BG,SB,SFACB,SFSB**

|

KP27077

19. Seat| |

KP27078

20. 1.8GPM Flow Restrictor|

WH**

|

KP27074

21. Quick Connect| |

KP27076

22. Hex Wrench| |

KP27020

23. Filter Washers| |

KP27167

*Denotes spray hose assembly color options: Spray hose assembly color options: Black hose w/ Brushed Gold connector (BLBG), Black hose with Spot-Free Stainless connector (BLSFS), Black hose with Black Stainless connector (BLSB), Gray hose with Chrome connector (GRCH), Gray hose with Spot-Free Stainless connector (GRSFS)
**Denotes faucet component color options:

CH – Chrome
SFS – Spot Free Stainless Steel
MB – Matte Black
BG – Brushed Gold
SB – Black Stainless
SFACB – Spot Free Antique Champagne Bronze
SFSB – Spot Free Black Stainless
BL – Black
WH – White

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM

|

CAUSE

|

ACTION

---|---|---
Leakage under the handle| Bonnet nut (12) has come loose| Remove the index (14.3). Loosen set screw (14.2) with hex wrench (14). Remove the handle (14.1). Unscrew cap (13) (by hand only). Tighten bonnet nut (12) with an adjustable wrench
The aerator has an irregular or reduced water flow| The aerator is dirty or mis-fitted| Remove the aerator and check for debris. Ensure that the rubber washer is properly installed.
The water pressure is low.| The connector underneath

the deck is clogged with debris The aerator is clogged

**** The screen filter in the hose connectors is dirty.

| Turn off the water supply and disconnect the connector / aerator. Unscrew the connector / aerator and clean under running water. Screw the connector / aerator back. Test water flow. If water pressure is still low then replace the connector / aerator.
Turn off the water supply at water valve and unscrew the hose connectors from water supply lines. Clean the screen in the water lines with hot water, removing any debris or calcium build up.

Care & Maintenance

To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth
Do not clean with soaps, acid, polish, abrasives or harsh cleaners
Do not use cloth with a coarse surface
Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Codes/Standards Applicable

FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non- transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide: