Pro Armor AU51080 Bluetooth Sound Bar System Operators Guide

: June 13, 2024
: PRO ARMOR

Table of Contents

Pro Armor AU51080 Bluetooth Sound Bar System
Wiring
Controls
Bluetooth Device Pairing
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pro Armor AU51080 Bluetooth Sound Bar System

Pro Armor AU51080 Bluetooth Sound Bar System-product

Congratulations on your choice of Pro Armor Sound Bars. This “Quick Start” Installation guide is meant to help you complete a basic installation. For more detailed information about the product, please visit our website at ProArmor.com

Wiring

The wiring and connections should be secure and away from any moving parts or extremely hot surfaces.

Pro Armor AU51080 Bluetooth Sound Bar System-fig-1

Controls

Power – Will turn the unit on or off. /Three-second press will switch audio inputs.
PLAY/PAUSE – Press once to pause. Press again to play.
Volume DOWN – Each press will decrease the volume.
Volume UP – Each press will increase the volume.
Track DOWN – Press to restart the current track or to back up to previous tracks.
Track UP – Press to advance to the next track.
Bluetooth LED
Power LED – Push to reset all functions.

Pro Armor AU51080 Bluetooth Sound Bar System-fig-2

Bluetooth Device Pairing

The pairing process can vary based on your particular device. Refer to the operating instructions of your device. Below is the general process to connect.
The Pro Armor Soundbar unit can be powered on either with the power button or with the orange remote turn-on wire.
During unit power-up, the blue LED on the right of the control panel will blink indicating that it is in Bluetooth search mode.
During this process “PRO ARMOR” should show up in your list of Bluetooth devices when the search has connected with your device. When the connection is made the blue LED will change to solid.
Once a device has been paired the unit will reconnect at power up if the device
is in range.
To connect to a different device, the first device will need to be disconnected.
When a phone call is received, the audio signal will mute but not disconnect.
To switch to 3.5mm press the power button for three sec.
To switch back to BT press the power button again for three sec.