PRO ARMOR P2112R137 Polaris RZR MP Cage System Roof Instructions
- June 9, 2024
- PRO ARMOR
Table of Contents
PRO ARMOR P2112R137 Polaris RZR MP Cage System Roof
Product Information
- Product Name : PRDARMDR
- Components:
- 1 Roof
- 16 Button Head Bolts
- 1 Foam Adhesive
- 1 llMM Allen Key
- Compatibility: Pro R4 & Turbo R4
Product Usage Instructions
- Apply rubber liner along the sides of the roof and on cross sections of cage tubing along the middle of the cage.
- With the help of a friend, place the roof onto the vehicle and line up bolt holes for proper placement.
- Insert and hand tighten 16 screws, then tighten. Do not overtighten.
- The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained.
- Proper installation is solely the responsibility of the installer and will not be assumed by Pro Armor.
- If you have any doubts about the installation, call (888)312-7667 or have an authorized dealer or trained technician inspect your installation.
INSTALLATION INSTRUCTION
- Apply rubber liner along the sides of roof and on cross sections of cage tubing along the middle of cage. With a little help from a friend place roof onto vehicle and line up bolt holes for proper placement.
- Insert and hand tighten 16 screws then tighten. Do not overtighten.
WARNING
- Never stick hands, head or arms outside of vehicle at any time when It Is In mat/on.
- Always wear and use proper safety equipment when using any Pro Armor product
- Improper use of directions and/or product can result In Injury to yourself or damage to your vehicle.
- Disclaimer please read: This product is sold without warranty expressed or implied. No warranty or representation is made as to the product’s ability to protect the user I occupant from any Injury or death In any manner of use. The user assumes that risk. The effectiveness of this equipment Is directly related to the manner In which It is
- Installed, used, and I or maintained.
- Proper Installation Is solely the responsibility of the Installer, and will nat be assumed bv Pro Armor.
- If you have questions about your installation or are unable able to complete installation, contact Pro Armor Customer Service 888-312-7667 or have an authorized dealer or trained technician, Inspect your Installation.
CONTENT
- 1- ROOF
- 16 – BUTTON HEAD BOLTS
- 1- FOAM ADHESIVE
TOOLS REQUIRED
- 1- llMM ALLEN KEY
PRO R4 & Turbo R4 ROOF INSTALL (P2112R137/P2112R138)
Read User Manual Online (PDF format)
Loading......