DENVER BTG-408 Instruction Manual
- June 7, 2024
- Denver
Table of Contents
BTG-408
Instruction Manual
Please read this instruction manual carefully before using it, and keep it for
future reference.
www.denver-electronics.com
Product Overview
- Power On/Off
- Play/Pause Button
- Mode Button
- Backward/Volume down
- Forward/Volume Up
- USB port
- Micro SD slot
- Charging port
- AUX IN
Charging
There are two ways to charge the speaker.
- Plug the USB charging cable into the speaker and connect to another USB power source like PC/MAC, etc.
- Use the AC adapter to charge (not included).
Please turn off the speaker when charging.
Indicator Status
| Type | Indicator | State |
|---|---|---|
| Bluetooth indicator | Rapid flashing blue | Ready to link |
| Slowly flashing blue. | Linked | |
| Blue | AUX-in mode | |
| Battery indicator | Red light normally on | Charging |
| Red light off | Fully charged |
Connecting
Bluetooth connection
Long press the Power button to power ON.
The speaker BT indicator will flash in blue
Search the Bluetooth device on your cellphone, select “BTG-408” in the list BT
indicator will slowly flash blue after the speaker is linked to the phone.
Media files supported via USIEWMicro SD card reader: MPS. way. WMA TWS
function — pair two speakers by long-press Pause button to get a
stereo set.
FAQ:
-
Unable to turn on the speaker Make sure the battery is full and the battery indicator light is on.
-
Unable to connect to BT-enabled device
Make sure that the device is in BT mode, and is within 10 meters from the speaker.
Ensure that neither the speaker nor the device is blue-connected to any other devices. -
No sound heard
Please turn up the volume. -
The speaker has no response
Please power off and try again.
Please notice – All products are subject to change without any notice. We take
reservations for errors and omissions in me manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contain materials,
components, and substances that can be hazardous to your health and the
environment if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed-out
trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end-user, it is important that you submit your used batteries to the
appropriate and designated facility. In this manner, you make sure that the
batteries are recycled in accordance with the legislature and will not harm
the environment.
AI cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites or be collected from households.
Additional information is available at the technical department of your city.
Frequency bands: 2402-2480MHz Maximum output power: 4dBm
DENVER ELECTRONICS A/S Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
Hereby, Inter Sales A/S declares that this model DENVER BTG-408 is in
compliance with the essential requirements and other relevant provisions of
Directive 2014153/EU.
Please enter:www.denver-electronics.com and then click the search ICON on the top line of the
website. Write model number: BTG-408
Now enter product page, and red directive is found under
downloads/other downloads
Warning: Lithium battery inside
Documents / Resources
|
DENVER DENVER
BTG-408
[pdf] Instruction Manual
BTG-408, DENVER, Speaker
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>