thermaltake CL-F127-PL12SW-A Pure 12 ARGB Sync Radiator Fan White TT Premium Edition Installation Guide
- June 7, 2024
- thermaltake
Table of Contents
thermaltake CL-F127-PL12SW-A Pure 12 ARGB Sync Radiator Fan White TT
Premium Edition Installation Guide
Parts List
-
A. x 3 Fan
-
**B. x 1 ARGB Controller
**
- **C. x 12 Long Screw
**
- **D. x 12 Short Screw
**
-
E. x 1 Mainboard Signal Bridge Cable
(ASUS,MSI,GIGABYTE)
-
G. x 1 PWM Cable
Installation Guide
-
Install the fans properly onto the radiator
-
Connect the Fans in series
-
Connect the PWM cable to mainboard.
-
Connect the fan power cable to PWM cable
ARGB Controller Installation Guide
-
Connect the ARGB controller to the Fans
-
Connent the ARGB controller to the SATA connector
Mianboard SYNC installtation Guide
CAUTION: Please power off the PC and
check the Positive and Negative ends on the connector before connecting the
cable to mainboard. Connecting the wrong end can damage the fans.
-
Connect the Mainboard Signal Bridge Cable to fan led cable
-
ASUS: Aura Addressable Strip Header(s)
-
MSI: JRGB-strip Header(S)
-
GIGABYTE: AOURS RGB Fusion with Digital LEDs
ARGB Controller
-
Light Mode:
Switch over between 7 LED modes
Rainbow → Full light → RGB Spectrum → Off → Flow → Ripple → Pulse → Blink -
Color Mode:
When light mode is in Full Lighted, Pulse and Blink :
Switch over 8 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
When light mode is in Ripple :
Switch over 7 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple
When light mode is in RGB Spectrum:
Click to memorize and lock the color you want, click again to unlock the 256 colors auto rotation.
When light mode is in Wave and Flow :
LED color can not be adjusted. -
Light Speed:
Switch over between 4 light modes.
Slow → Normal → Fast → Extreme
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved. www.thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>