thermaltake CL-W319-PL12BL-A TOUGHLIQUID 240 ARGB Sync Installation Guide
- June 7, 2024
- thermaltake
Table of Contents
TOUGHLIQUID 240 ARGB Sync
Parts List
Intel Installation Guide
AMD Installation Guide
Installation Guide
ARGB Controller Installation Guide
-
Light Mode:
Switch over between 7 LED modes.
Rainbow → Full light → RGB Spectrum → Off → Flow → Radar → Pulse → Blink -
Color Mode:
When light mode is in Full Lighted, Pulse and Blink :
Switch over 8 LED colors.
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
When light mode is in Ripple :
Switch over 7 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple
When light mode is in RGB Spectrum:
Click to memorize and lock the color you want, click again to unlock the 256
colors auto rotation.
When light mode is in Wave and Flow :
LED color can not be adjusted. -
Light Speed:
Switch over between 4 light modes.
Slow → Normal → Fast → Extreme
MB SYNC Installation Guide
CAUTION
- To use Motherboard RGB Software, please only connect Cable F to the water block
- Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to the mainboard.
Connecting the wrong end can damage the product.
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>