Intertek LA-10A-6 Travel Tap User Manual

: June 7, 2024
: Intertek

Table of Contents

Intertek LA-10A-6 Travel Tap
SPECIFICATIONS
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Intertek LA-10A-6 Travel Tap

SPECIFICATIONS

Line Voltage: 125VAC
Maximum Line Current: 15 Amp/1875 Watts
3-wire Grounding Outlets: 2
USB Charging Ports: Two 5VDC/2.1 Amp Total Output

CONFORMS TO UL STD 498A
CERTIFIED TO CSA STD. C22.2 NO.42
1. Plug unit into a standard grounding 15A wall receptacle. Unit is not intended for use with 20A or GFCI wall receptacles.
NOTE: USB charging ports may not charge all devices. Some devices require a proprietary power supply.

FCC STATEMENT

This device complies with part 15 of the FCC rules and the Canadian ICES-003. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

TO REDUCE THE RISK OF DANGER, UNPLUG ANY AC CORDS AND CHARGING CORDS WHEN NOT IN USE. HOLD THE TAP STEADY WHEN PLUGGING AND UNPLUGGING AC CORDS AND CHARGING CORDS AND ENSURE THE WALL TAP IS FLUSH AGAINST THE WALL WHEN IN USE.
TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS, UNIT SHOULD BE PLUGGED INTO AN INTERIOR GROUNDED PARALLEL DUPLEX RECEPTACLE. NOT FOR USE WITH GROUND-FAULT CIRCUIT-INTERRUPTER RECEPTACLES OR RECEPTACLES WITH INDICATOR LIGHTS OR CONTROL TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS DEVICE WITH A RECEPTACLE IN WHICH THE SLOT OPENINGS DO NOT ALIGN WITH THE BLADES.
ALL CHARGING ESSENTIALS PRODUCTS MUST BE INSTALLED AND USED IN ACCORDANCE WITH THEIR INSTRUCTIONS, INCLUDING INSTRUCTIONS PROVIDED WITH THE CHARGING ESSENTIALS PRODUCT PACKAGING OR PROVIDED ON THE PRODUCT ITSELF. CHARGING ESSENTIAL SURGE SUPPRESSION PRODUCTS WILL NOT PREVENT DAMAGE FROM ALL SURGES, AND SPECIFICALLY ARE NOT DESIGNED OR WARRANTED TO PROTECT AGAINST LIGHTNING STRIKES. CHARGING ESSENTIAL SURGE SUPPRESSION PRODUCTS MUST BE INSTALLED ON A PROPERLY GROUNDED OUTLET WITH A CIRCUIT BREAKER APPROPRIATE FOR ELECTRONIC PRODUCTS, TYPICALLY 15 AMPS.
AT THE DISCRETION OF CHARGING ESSENTIALS ANY DEFECTIVE PRODUCT WILL BE REPLACED OR THE PURCHASE PRICE REFUNDED. THIS WARRANTY SHALL IN NO EVENT EXCEED AMOUNTS PAID BY CUSTOMER TO CHARGING ESSENTIALS OR ITS AFFILIATES FOR THE CHARGING ESSENTIALS PRODUCTS INVOLVED, AND EXPRESSLY EXCLUDES COVERAGE OF ANY DAMAGE TO THIRD PARTY PRODUCTS OR ELECTRONICS.

RISK OF ELECTRIC SHOCK