the t racks C 460576 SRL-4 Rack Light RGBW User Guide
- June 7, 2024
- the t racks
Table of Contents
the t racks C 460576 SRL-4 Rack Light RGBW
This quick start guide contains important information on the safe operation of the device. Read and follow the safety advice and instructions given. Retain the manual for future reference. If you pass the device on to others please include this manual.
Safety instructions
Intended use
This device is intended for lighting temporarily racks by means of LED
technology. Any other use or use under other operating conditions is
considered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
Extend the operating life of the device by regular breaks and by avoiding
frequent switching on and off. The device is not suitable for continuous
operation.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside. Do not use the
device when covers, safety equipment or optical components are missing or
damaged.
Electric shock caused by short-circuit
Always use proper ready-made insulated two-wire mains cabling (power cord). Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Where to use the product
Never use the product
- in direct sunlight
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
- For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
- Multicolour rack light an even illumination of the rack
- Suitable for 19″ racks (1 RU)
- 15 selectable macros with different hues
- Three selectable brightness levels
- Memory function
• Incl. power adapter
• Strain relief for the power adapter
Memory function
- Incl. power adapter
- Strain relief for the power adapter
Controls and connections
- Dimmer/Switch: Button to turn the unit on and off and set the brightness of the LEDs
- POWER IN: Connection socket for the power adapter
- Color: Button to set the colours of the LEDs
Operating
-
Turn the unit on and off
Keep the button [Dimmer/Switch] pressed until the unit switches on or off. -
Brightness setting
Repeatedly press the button [Dimmer/Switch] to select one of the three brightness levels of the LEDs. -
Macros setting
Repeatedly press the button [Colors] to select one of the 15 hues of the LEDs. -
Memory function
All settings of brightness and macros are retained, even if the unit is disconnected from the mains.
Technical specifications
- Light source: 30 × multicolour RGBW 4in1 LEDs
- Colour temperature: 3200K, 5600K, 7200K
- Light output: 150 lumen
- Power supply: 12 V
- Material: metal
- Colour: black
- Dimensions (W × H × D): 485 mm × 44 mm × 60 mm
- Weight: 0.9 kg
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>