Aluratek ABH05F Bluetooth Wireless Stereo Headphones User Guide
- June 7, 2024
- Aluratek
Table of Contents
Bluetooth Wireless Stereo
Headphones
model ABH05F
qsg Q10546
Quick Start Guide
Package Contents
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact us immediately for assistance.
Product Highlights
Button Operation
Volume Adjust: Press the or buttons to adjust the volume.
Play/Pause: Short press the button to play and pause music.
Previous: Long press the **button for 2 seconds to return to the
previous music track.
Next : Long press the **button for 2 seconds to advance to the next
music track.
Answer Call: Short press the **button to answer phone calls.
End call: Short press the **button to end the phone call.
Reject call: Press and hold the **button for 2 seconds to reject a
call.
Last number redial: In standby status, press the **button twice to
redial the last number.
Battery Capacity status: When the headphones are connected to an iOS
device, the headphone battery power status is visible in the upper right
corner.
**Device Operation
**
Charging the battery
The battery is not fully charged and it is highly recommended that you charge
ABH05F before you begin using it.
Note: Using ABH05F “out of the box” will not harm the device. You will
experience reduced battery life as the unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer/power
adapter (not included). Connect the smaller micro USB end to the USB port of
ABH05F. Please charge the battery for a minimum of 3 hours. The red LED will
be on while charging. When charging is complete, the blue LED will turn ON.
Note: The pairing mode will last 10 minutes. ABH05F will power off
automatically if no devices can be connected within 10 minutes.
Pairing with an iPhone, smartphone, or tablet:
The pairing procedure will vary depending on the actual device. Please refer
to the user guide of your device for detailed instructions. The pairing
procedures are as follows:
-
Make sure ABH05F is powered OFF.
-
To activate the headphone pairing mode, power on ABH05F, it will enter pairing mode automatically. (Red and Blue LED will flash rapidly)
-
Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select ABCTVKITH when it is found.
-
For transmitter with Bluetooth version 2.1, you will not need to input a code.
If you are prompted for a PIN, please enter “0000”. -
If prompted by your device to connect, please select “Yes”.
-
After connecting successfully, the blue LED will flash once every 10 seconds.
Note: Please make sure the audio output is set to Bluetooth for audio streaming from the device.
3.5mm music line-in function
Connect the audio line-in 3.5mm cable to a 3.5 audio jack for wired music.
- Connect the 3.5 audio wire to the headphone and audio player.
- You can adjust the volume from the connected audio player or mobile phone.
Note: Phone function cannot be used in this mode
Technical Support
If you need further assistance, please contact the Aluratek support department
for troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll-free: 1-866-580-1978
R adio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by whatever measures may be required to correct
the interference.
Warranty
Aluratek warrants this product against defect in material or workmanship for
1 YEAR from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or
“warranty void” sticker has been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence, or modification of any part of the
product.
C) Damage due to improper operation or maintenance, connection to improper
equipment, or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THE
PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or
statutory, with respect to its products, contents, or use of this
documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose.
Aluratek reserves the right to revise or update its product, software, or
documentation without obligation to notify
any individual or entity.
Copyright © 2020 Aluratek, Inc. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>