Aluratek AWDMPF107F WiFi Touchscreen Digital Photo Frame User Manual

Aluratek AWDMPF107F WiFi Touchscreen Digital Photo Frame

What’s-In-The Box?

• Frame Stand
• Power Adapter
• USB 2.0 Cable

Let’s Power Up!

Connect the power adapter to an outlet to turn the frame on.

Download and install “The frame time” App on your phone

• Download the Frametime app by searching for “Primetime” from the app store.
• Once the “Frametime” app is installed, please follow the on-screen instruction to register an account.

How to Add Your Smart-Frame to the Frametime App

Note: You can use the frame to display pictures on a USB/SD Card without connecting to WiFi by selecting USB/SD on the main menuNote: You can use the frame to display pictures on a USB/SD Card without connecting to WiFi by selecting USB/SD on the main menu.

Step 1: Connect the Frame to Your WiFi Network

1. Press the “Photo” icon on the screen. (Image 1)
2. Press the “Next” button. (Image 2)
3. Press the “Next” button. (Image 3)
4. Select “Connect Wi-Fi” (Image 4)
5. Tap on your network name (Image 5). A window will appear to enter the password. Tap on the password field to reveal the keyboard.

Step 2: Open the Frametime App on Your Smart Device

Tap “Create Home” and enter a home name. You can select or deselect rooms by tapping on the checkmark. Press “Save” in the top right corner.

Step 3: Open the Frametime app if not already open, and press “Add Device” (Image 3). Press “Scan” and tap “ok” to allow camera access (Image 4). Scan the QR code on the frame. A new window will appear that will allow you to give your frame a name and select a room. Press “Done” in the top right corner (Image 5).

How to send photos to the frame from your phone

Open the Frametime app on your smartphone and tap on the name of the frame. Press the “ ” button at the bottom of the screen and select the photos you wish to send to the frame. When finished selecting photos, press the “done” button at the bottom right. To send photos to the frame, press the “upload” button.

How to auto power on/off the frame

Open the “Frametime” app, choose your “WiFi frame”, and press the ” ” button at the bottom right corner. Tap “Add” in the middle, choose a time that you want to auto power on/off your frame, then save it.

How to remove a frame from the Frametime app

Step 1: Open the Frametime app, select your “WiFi frame”, tap the ” ” on the upper right corner to edit the frame setting, and tap “Remove Device” to delete the frame from your account.

Allow other users to send pictures to your frame

Please make sure the person you are sharing the frame with already downloaded the “Frametime” app on their smart device and created an account. You will need to have the email address they used for their account in order to share the access of the frame to their account.

Step 1: Open the “Frametime” app, choose the digital photo frame and select the “ ” icon in the top right corner. (Image 6) Then select “Share Device” (Image 7).

Step 2: Select “Add Sharing” (Image 8), input the email address or phone number of the person you want to share the frame with, and select “Done” (Image 9).

For the person that you just shared the frame with, he or she will get a notification on their smart device. The frame will show up as a shared device on the main screen. They can start sending pictures to the frame by following the instructions in the “How to send photos to the frame from your phone” section.

Technical Support

If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.

• E-mail: support@aluratek.com
• Web: www.aluratek.com/helpdesk
• Local (Irvine, CA): 714-586-8730
• Toll-free: 1-866-580-1978

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.

Warranty

• Aluratek warrants this product against defects in material or workmanship for 1 YEAR from the date of purchase.
• This warranty becomes invalid if the factory-supplied serial number or “warranty void” sticker has been removed or altered on the product.

This warranty does not cover:

• A) Cosmetic damage or damage due to acts of God
• B) Accident, misuse, abuse, negligence, or modification of any part of the product.
• C) Damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than Aluratek.
• D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to its products, contents, or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update its product, software, or documentation without obligation to notify any individual or entity.

References

• Aluratek | Leading the Digital Revolution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>