cleer ENDURO ANC Noise Cancelling Wireless Headphone User Guide
- June 7, 2024
- cleer
Table of Contents
ENDURO ANC
Active Noise Cancellation Headphone
Quick Start Guide | User Manual | Warranty Card
INTRODUCTION
Box contents
Overview
Fitting
Slide to adjust the headband to fit to your head
Correct wearing position
QUICKSTART GUIDE
- Press and hold the power button for 2 seconds to turn on your ENDURO ANC.
-
ENDURO ANC will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps on page 6).
** ENDURO ANC will automatically connect to the last connected device if it is in range and available for pairing.
-
Find “Cleer ENDURO ANC” on the Bluetooth device list.
-
Enjoy your ENDURO ANC.
-
Cleer Connect App
The Cleer Connect app gives you a more customized control to your ENDURO ANC,
download the Cleer Connect app from the App Store (for iOS devices) or the
Google Play (for Android devices).
With the Cleer Connect app, you can:
- Turn on and off the Ambient Noise Control
- Real-time tuning of the Ambient Noise Control level
- Customize the equalizer setting of your ENDURO ANC
- Choose preset music profiles to tune your ENDURO ANC to more accurately reproduce the style of music you listen to
- Change the Bluetooth name of your ENDURO ANC
- Receive software updates when new features and improvements are available
- Check playback time and battery level of your ENDURO ANC
- Sound settings are saved in your ENDURO ANC and can be enjoyed with any player you connect to your ENDURO ANC.
USER MANUAL
Bluetooth pairing
Pairing Mode
- ENDURO ANC is OFF. Press and hold the power button until the LED blinks white & red.
- Find “Cleer ENDURO ANC” on the Bluetooth device list.
- ENDURO ANC is now paired.
Multi-function button
| Music: Play/Pause
---|---
| Music: Next track
Pick/Hang up call
| Music: Previous track
| Power ON/OFF
Reject call
ANC Button
| Toggle between Noise cancellation mode/
Ambient mode/OFF
---|---
| Summon default voice assistant
| Enter Conversation mode (Active while pressed, release to exit)
Volume control
| Volume up by one increment
---|---
| Volume up continuously
| Volume down by one increment
| Volume down continuously
Line-in connection
Charging
Connect ENDURO ANC to a power source with the provided USB-C cable.
A 10-minute charge will give 2 hours of playtime.
ENDURO ANC can be fully charged in 3 hours.
LED behavior
Power-on but not connected with any device
Power on and connected with the device
Pairing mode
Battery level below 10%
Charging
Charging completed
- ENDURO ANC can only be powered ON when not charging
Specifications
Driver: | 40mm Ironless Driver™ |
---|---|
Audio CODEC support: | SBC, AAC, aptX Adaptive |
Frequency response range: | 20-40KHz (Line in)/ 20-20KHz (Bluetooth) |
Connections: | USB-C to 3.5mm for audio, USB-C to USB-A for |
charging
Support:| BT 5.0, SPP v1.0, HFP v1.6, A2DP v1.3.1, AVRCP v1.6
Charging:| A 10-minute charge will give 2 hours of playtime.
ENDURO ANC can be fully charged in 3 hours
Bluetooth transmission
frequency range:| 2.402-2.480GHz
Bluetooth transmission power:| <4dBm
Battery:| Rechargeable lithium-ion rectangle cell (3.7V)
Playback time (BT):| 60 hours
Weight:| 280 g
WARRANTY
Cleer Limited Warranty
Cleer Limited warrants this product against defects in material or workmanship
for (1) year as set forth below when purchased directly from Cleer Limited or
a Cleer Limited retailer. Pursuant to this Limited Warranty, Cleer Limited
will, at its option, (i) repair the product using new or refurbished parts or
(ii) replace the product with a new or refurbished product. For purposes of
this Limited Warranty, “refurbished” means a product or part that has been
returned to its original specifications. In the event of a defect, these are
your exclusive remedies.
Labor: For a period of (1) year from the original date of purchase of the
product (“Labor Warranty”), Cleer Limited will, at its option, repair or
replace with a new or refurbished product, product determined to be defective.
If Cleer Limited elects to replace the product after this Labor Warranty has
expired but while the parts warranty is still in effect, it will do so for the
applicable labor charge.
Parts: For a period of (1) year from the original date of purchase of the
product (“Parts Warranty”), Cleer Limited will supply new or refurbished
replacement parts in exchange for parts determined to be defective.
This Limited Warranty covers only the hardware components packaged with the
Product. It does not cover technical assistance for hardware or software usage
and it does not cover any software products whether or not contained in the
Product; any such software is provided “AS IS” unless expressly provided for
in any enclosed software Limited Warranty. Please refer to the End User
License Agreements included with the Product for your rights and obligations
with respect to the software.
Instructions: To obtain warranty service, you must deliver the Product,
freight prepaid, in either its original packaging or packaging affording an
equal degree of protection to the original Cleer Limited retailer (point of
purchase) or Cleer Limited Customer Service. It is your responsibility to
backup any data, software, or other materials you may have stored or preserved
on your unit. It is unlikely that such data, software, or other materials will
be lost or reformatted during service, and Cleer Limited will not be
responsible for any such damage or loss. A dated purchase receipt from Cleer
Limited or a Cleer Limited retailer is required. For specific instructions on
how to obtain warranty service for your product,
Visit the Cleer Limited website:
www.cleeraudio.com
Following warranty service, your original Product or a replacement Product
will be returned to you as your Product was configured when originally
purchased.
Repair / Replacement Warranty: This Limited Warranty shall apply to any
repair, replacement part, or replacement product for the remainder of the
original Limited Warranty period or for (90) days, whichever is longer. Any
parts or products replaced under this Limited Warranty will become the
property of Cleer Limited.
This Limited Warranty shall not apply to (a) consumable parts, such as
batteries that are designed to diminish over time, unless failure has occurred
due to a defect in materials or workmanship; (b) cosmetic damage, including
but not limited to scratches, dents and broken plastic on ports; (c) defects
caused by normal wear and tear or otherwise due to the normal aging of the
device; (d) damage caused by accident, negligence, abuse, misuse, fire,
earthquakes, acts of God or damage resulting from liquid outside of the
approved levels; (e) damage caused by operating the device outside Cleer
Limited published guidelines; (f) damage caused by service performed by anyone
who is not a representative of Cleer Limited or a Cleer Limited authorized
service provider; (g) Products whose seals are tampered; (h) Products whose
serial
ENDURO ANC WARRANTY
numbers have been removed or defaced from such Product; (i) modifications,
alterations or repairs to the Product made by a party other than Cleer Limited
or a party authorized by Cleer Limited; (j) any failure by End User or a third
party to comply with environmental and storage requirements for the Product
specified by Cleer Limited, including, without limitation, temperature or
humidity ranges; or (k) use of the Product in combination with any third-party
devices or products that have not been provided or recommended by Cleer
Limited. LIMITATION ON DAMAGES: CLEER LIMITED SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF
THIS WARRANTY. DISCLAIMER: THE LIMITED WARRANTY SET FORTH HEREIN IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS RELATING TO THE PRODUCT,
WHETHER EXPRESS OR IMPLIED, AND CLEER LIMITED EXPRESSLY DISCLAIMS ALL OTHER
WARRANTIES AND CONDITIONS WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
ANY IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A
PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING OR
USAGE OF TRADE AND AGAINST HIDDEN DEFECTS, TO THE FULLEST EXTENT PERMITTED BY
LAW. CLEER LIMITED DOES NOT WARRANT THAT THE PRODUCT WILL MEET THE CUSTOMER’S
REQUIREMENTS OR THAT USE OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM CLEER LIMITED
OR ELSEWHERE WILL CREATE ANY WARRANTY NOT EXPRESSLY STATED IN THIS WARRANTY.
NOTICE
Recycling
Your product is designed and manufactured with high-quality materials and
components, which can be recycled and reused. When you see the crossed-out
wheel bin symbol attached to a product, it means the product is covered by the
European Directive 2002/96 EC:
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products. The correct disposal of your old product helps prevent
potentially negative consequences on the environment and human health. Your
product contains batteries covered by the European Directive 2006/66/EC, which
cannot be disposed of with normal household waste.
The device complies with RF specifications when the device is used at 0mm from
your body. This device may be operated in all member states of the EU.
Declaration for EU compliance: Operation Frequency Band/Max. RF power
transmitted: 2402-2480MHz, <10dBm. Hereby, Cleer Limited declares that the
radio equipment type `headphone’ is in compliance with Directive 2014/53/EU
This device may be operated in all member states of the EU.
Declaration for EU compliance: Operation Frequency Band/Max. RF power
transmitted: 2402-2480MHz, 2.5mW.
Compliance with FCC rules
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Battery:
Do not ingest battery, Chemical Burn Hazard This product contains a
coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Register your product and get support at
www.cleeraudio.com ©2020 Cleer Limited. All
rights reserved. The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Cleer Limited is
under license. Other trademarks and trade names are those of their respective
owners. Qualcomm aptX is a product of Qualcomm Technologies International,
Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the
United States and other countries, used with permission. aptX is a trademark
of Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission. Made in China.
OWN THE MOMENT
Find this user manual on www.cleeraudio.com
Follow us on social media
@Cleersound
@CleerAudio
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>