INSIGNIA NS-PWLG3 USB-C Wall Charger Installation Guide

: June 6, 2024
: Insignia

Table of Contents

PACKAGE CONTENTS
FEATURES
SAFETY INFORMATION
COMPATIBILITY
USING YOUR CHARGER
SPECIFICATIONS
LEGAL NOTICE
ONE-YEAR LIMITED WARRANTY
CONTACT INSIGNIA:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUICK SETUP GUIDE
USB-C Wall Charger
NS-PWLG3 / NS-PWLG3-C

PACKAGE CONTENTS

Power charger
USB-C charge/sync cable
Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.

FEATURES

Two USB-C ports for up to 100 W of power to quickly charge up compatible devices
One additional USB port to charge common devices like tablets, smartphones, and other devices
100~240 V input works with standard outlets in most countries
112 W total output charges your different devices quickly
6.6 ft. (2.0 m) USB-C to C Braided Cable

SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING

THIS PRODUCT IS NOT A VOLTAGE CONVERTER. Use this charger only if the power outlet voltage is within the range of your device’s voltage. Using this charger with an incompatible device and power outlet may result in a risk of fire, electric shock, injury to persons, or damage to the device.
Always attach the charger to the device plug first, then insert the adapter into the power outlet.
Do not expose the charger to high temperatures or humid environments.
Do not place the products into a fire or submerge it in liquid.
Do not disassemble the product.
Avoid external shocks.
The product will heat slightly when charging and discharging. This is normal.
Do not operate the charger with wet hands.
Keep out of reach of children.
Indoor use only.
Protection class II appliance.

COMPATIBILITY

Works with laptops and other USB devices
USB-C ports: up to 100 W
USB port: up to 12 W

USING YOUR CHARGER

Pull out the foldable plug blades and plug the charger into a standard wall outlet.
Connect a USB-C cable to the charger, then plug it into the device you want to charge.

SPECIFICATIONS

Input: 100 ~ 240 VAC, ~ 50/60 Hz, 3.0 A
Output: USB-C 1: 100 W (5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/5 A)
USB-C 2: 100 W (5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/5 A)
USB-C1+C2: 100 W max
USB-C1 PPS: 3.3 V~21 V/5 A (100 W max)
USB-C2 PPS: 3.3 V~21 V /5 A (100 W max)
USB-A: 12 W (5 V/2.4 A)
Energy Efficiency: > 86%
Working Temperature: 32°F~95°F (0 ~ 35°C)
Working Humidity: 10% ~ 90%
Dimensions: 3.4 × 2.3 × 1.2 in. (86.5 × 59.5 × 30.8 mm)
Weight: 7.2 oz. (205 g) (charger only)
Cable: 6.6 ft. (2.0 m) USB-C to C, 100 W cable

LEGAL NOTICE

FCC Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ICES Statement
CAN ICES-003(B) / NMB-003(B)