ZEBRA ET60AW-0SQAGSK0A0-NA Attachable Keyboard User Guide

: June 1, 2024
: ZEBRA

Table of Contents

Features
Attaching the Keyboard
Removing the Keyboard
Regulatory Information
United States and Canada Regulatory
Warranty
Product Support Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRA ET60AW-0SQAGSK0A0-NA Attachable Keyboard User Guide

Features

NOTE: Use only with Zebra ET60/65 tablets.

Product Overawe

1	Keyboard latch	Connects keyboard to the tablet.
2	Keyboard alignment pins	Aligns the tablet to the keyboard during

Attaching the Keyboard

Place the keyboard on a flat and level surface.
Align the keyboard alignment markings on the tablet and keyboard.
Gently press the tablet down onto the keyboard until you hear a click.

When the keyboard is correctly installed, the keyboard locking switch automatically clicks into the lock position and the red indicator is hidden under the switch.

Removing the Keyboard

Place the tablet on a flat and level surface.
Ensure the keyboard and tablet are in the open position.
Slide and hold the keyboard locking switch to the Unlock position.
When in the unlock position, the red indicator is visible to the left of the switch.
Lift the tablet from the keyboard

Setting the Tablet Display Brightness

Use F4 (decrease) or F5 (increase) to change the tablet display brightness.

Setting the Keyboard Backlight Brightness

Use F6 (decrease) or F7 (increase) to change the keyboard backlight brightness.

Setting the Keyboard Backlight Color

The user can change the keyboard backlight color (red (default), blue, green, or white). Use F8 to cycle through the keyboard backlight colors.

Regulatory Information

This device is approved under Zebra Technologies Corporation.
This guide applies to the following model number: KBD-ET6X
All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.

Local language translation zebra.com/support

Declared maximum operating temperature: 60°C

For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs.

Regulatory Markings

Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc.

Health and Safety Recommendations

Ergonomic Recommendations

In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury

Marking and European Economic Area (EEA)

Statement of Compliance
Zebra hereby declares that this device is in compliance with Directives 2014/30/EU, 2014/ 35/EU and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: zebra.com/doc.

EU Importer: Zebra Technologies B.V
Address: Mercurius 12, 8448 GX Heerenveen, Netherlands

Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/
disposal advice at: zebra.com/weee.

United States and Canada Regulatory

Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003 (B)/NMB-003(B)

TÜRK WEEE Uyumluluk Beyanı

United Kingdom
Statement of Compliance

Zebra hereby declares that this device is in compliance with Electromagnetic Compatibility
Regulations 2016, the Electrical Equipment (Safety) Regulations 2016 and the Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012.
The full text of the UK Declaration of Conformity is available at: zebra.com/doc.

UK Importer: Zebra Technologies Europe Limited
Address:
Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF

Warranty

For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty.

Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.

If you have a problem running your unit or using your equipment, contact your facility’s
Technical or System Support. If there is a problem with the equipment, they will contact
Zebra support at zebra.com/support.
For the latest version of the guide go to: zebra.com\support.

Product Support Information

For information on using this product, see the User Guide at zebra.com/et60-info.
To find quick answers to known product behaviors, access our knowledge articles at supportcommunity.zebra.com/s/knowledge-base.
Ask your questions in our Support community at supportcommunity.zebra.com.
Download product manuals, drivers, software, and view how-to videos at zebra.com/support.
To request a repair for your product, go to zebra.com/repair.

Patent Information
To view Zebra patents, go to ip.zebra.com.