truelife NannyWatch A15 User Manual
- June 7, 2024
- truelife
Table of Contents
NannyWatch A15
**
Parent unit description**
- LCD screen
- Increase volume / Move up/ Turn on/off VOX
- Decrease volume / Move down / Push to Talk button
- MENU / OK / Turn lullabies on/off
- Turn on / Back / View time
- Wireless charging
- Speaker
- Microphone
Baby unit description
1. Light sensor
2. Camera lens
3. LED indicator of whether
the device is On or Off
4. Infrared LED light
5. Speaker| 6. Pairing button
7. Microphone
8. Charging input
9. Temperature sensor
---|---
Charging stand description
- Wireless connector for charging of the parent unit
- Charging input
Installation
- Connect the adapter to the charging input of the baby unit and connect it to a socket.
- Place the parent unit to the charging stand and connect the stand to a socket.
- The screen of the parent unit will show a charging icon, meaning that the battery is charging.
- You can hang the baby unit on the wall or place it somewhere near the baby.
- The camera head is adjustable, you can turn it in whichever direction you want.
- Pair the devices – see the “Pairing” section.
Screen
1. Signal strength indicator
2. Temperature in the baby’s room*
3. Lullaby signalization
4. VOX mode indicator| 5. Active alarm indicator
6. Battery status
7. Indicator of active Push to Talk
(microphone)
8. Date and time
---|---
*Note: The thermometer in the baby unit is not certified and the displayed temperature is only indicative.
Menu
Press the “Menu/OK” button to enter the menu.
1. Camera settings
2. Alarm settings| 3. VOX function settings
4. General settings
---|---
Press “Move up” and “Move down” to move from one option to another and press “MENU/OK” to confirm your selection. Press “Back” to return.
**Pairing***
In the Menu, confirm the “Camera” option for pairing. Confirm “Register” by
pressing
“Menu/Ok”. Then, hold the button at the back of the camera until the pairing
is complete.
*Note: The parent and baby units are paired by default and do not need to
be paired again. Choose this option if you want to perform a new pairing of
the units, e.g., when the signal is constantly being lost.
Alarm
Confirm “Alarm” in the menu. Press “Move down” to move between the values and
press “Move up” to change the value as required.
VOX
This enables and/or disables the VOX function, sets its sensitivity, and turns
vibrations on and off. If the VOX mode is enabled,
during live view, the screens are turned off after a moment of silence and the
sound transmission is reduced to save battery.
Settings
Enter the “Settings” to set the language, time and date, temperature units,
wavelength, and screen backlight. “Settings” also includes information about
the system and current Firmware.
Powering a video baby monitor via a power bank
A TrueLife video monitor is primarily intended for home use and to be powered
from the mains. Do not use VOX power-saving mode when using a power bank. In
this mode, the electrical consumption of the camera (baby unit) is so low that
some power banks might think the device is charged and turn off automatically.
This will interrupt transmission.
Contents of packaging
– Parent unit + power adapter
– Baby unit + power adapter
– Charging stand
– Manual
Manufacturer’s liability
A warranty for manufacturing defects is provided for TrueLife products. In
case of such defects, elem6 s.r.o. is obligated to repair or replace the
defective part or product with a comparable part or product at its own
discretion. Transfer, change or any other unauthorized handling of the product
are not covered by this warranty. This includes situations that the product is
lost or damaged due
to a defect, negligence, or other product faults. The warranty does not apply
to damage following from use, accident, or usual wear.
Company elem6 s.r.o. does not accept any liability for any accidents,
injuries, death, loss, or other claims related to or following from the use of
this product. Under no circumstances shall elem6 s.r.o. be held responsible
for incidental or consequential damage related
to or following from the use of this product or any of its parts. Returning or
replacement of spare parts and/or the product may be
subject to transportation, handling, replacement, and/or completion fees.
Typing and printing errors are reserved.
SAFE USE OF THE DEVICE :
- Read the attached safety instructions carefully.
- In order to correctly use the product, make sure to read the latest version of the manual – available for download at www.truelife.eu.
- Typing and printing errors are reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>